Ifm – O5D151

Photoelectric distance sensor; Operating voltage [V] : 10...30 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Type of light : red light; Wave length [nm] : 650; Typ. lifetime [h] : 50000; Total number of outputs : 2; Electrical design : NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (complementary); Max. current load per output [mA] : 100; Switching frequency DC [Hz] : 11; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Max. light spot diameter [mm] : 5; Light spot dimensions refer to : 2 m; Detection range hysteresis [%] : < 2.5; Note on monitoring range hysteresis : black 6% remission; Background suppression available : yes; Background suppression [m] : < 20; Measuring range [m] : 0.03...2; Sampling rate [Hz] : 33; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis; SIO mode : yes; Process data analogue : 1; Process data binary : 1; Min. process cycle time [ms] : 6.6; Supported DeviceIDs : Type of operation: DeviceID | Default: 372; Ambient temperature [°C] : -25...60; Note on ambient temperature : at ta < -10 °C warm-up is necessary, laser is off; Max. immunity to extraneous light [klx] : 10; (on the object); Housing : rectangular; Materials : housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA; Lens alignment : side lens; Display unit : cm

Photoelectric distance sensor; Operating voltage [V] : 10...30 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Type of light : red light; Wave length [nm] : 650; Typ. lifetime [h] : 50000; Total number of outputs : 2; Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (complementary); Max. current load per output [mA] : 100; Switching frequency DC [Hz] : 11; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Max. light spot diameter [mm] : 5; Light spot dimensions refer to : 2 m; Detection range hysteresis [%] : < 4; Note on monitoring range hysteresis : black 6% remission; Background suppression available : yes; Background suppression [m] : < 20; Measuring range [m] : 0.03...2; Sampling rate [Hz] : 33; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis; SIO mode : yes; Process data analogue : 1; Process data binary : 1; Min. process cycle time [ms] : 6.6; Supported DeviceIDs : Type of operation: DeviceID | Default: 372; Ambient temperature [°C] : -25...60; Note on ambient temperature : at ta < -10 °C warm-up is necessary, laser is off; Max. immunity to extraneous light [klx] : 10; (on the object); Housing : rectangular; Materials : housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA; Lens alignment : side lens; Display unit : cm

Photoelectric distance sensor; Operating voltage [V] : 10...30 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Type of light : red light; Wave length [nm] : 650; Typ. lifetime [h] : 50000; Total number of outputs : 2; Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (complementary); Max. current load per output [mA] : 100; Switching frequency DC [Hz] : 11; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Max. light spot diameter [mm] : 5; Light spot dimensions refer to : 2 m; Detection range hysteresis [%] : < 2.5; Note on monitoring range hysteresis : black 6% remission; Background suppression available : yes; Background suppression [m] : < 20; Measuring range [m] : 0.03...2; Sampling rate [Hz] : 33; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis; SIO mode : yes; Process data analogue : 1; Process data binary : 1; Min. process cycle time [ms] : 6.6; Supported DeviceIDs : Type of operation: DeviceID | Default: 393; Ambient temperature [°C] : -25...60; Note on ambient temperature : at ta < -10 °C warm-up is necessary, laser is off; Max. immunity to extraneous light [klx] : 10; (on the object); Housing : rectangular; Materials : housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA; Lens alignment : side lens; Display unit : inch

Photoelectric distance sensor; Operating voltage [V] : 10...30 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Type of light : red light; Wave length [nm] : 650; Typ. lifetime [h] : 50000; Total number of outputs : 2; Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (complementary); Max. current load per output [mA] : 100; Switching frequency DC [Hz] : 11; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Max. light spot diameter [mm] : 5; Light spot dimensions refer to : 2 m; Detection range hysteresis [%] : < 2.5; Note on monitoring range hysteresis : black 6% remission; Background suppression available : yes; Background suppression [m] : < 20; Measuring range [m] : 0.03...2; Sampling rate [Hz] : 33; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis; SIO mode : yes; Process data analogue : 1; Process data binary : 1; Min. process cycle time [ms] : 6.6; Supported DeviceIDs : Type of operation: DeviceID | Default: 372; Ambient temperature [°C] : -25...60; Note on ambient temperature : at ta < -10 °C warm-up is necessary, laser is off; Max. immunity to extraneous light [klx] : 10; (on the object); Housing : rectangular; Materials : housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA; Lens alignment : side lens; Display unit : cm