Ifm – PG1705

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...4 bar: -14.5...58 psi; Set point SP : -0.99...6.4 bar: -14.35...92.8 psi; Reset point rP : -1...6.39 bar: -14.5...92.65 psi; Analogue start point : -1...5.4 bar: -14.5...78.3 psi; Analogue end point : 0...6.4 bar: 0...92.8 psi; In steps of : 0.005 bar: 0.05 psi; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread Aseptoflex Vario; With scale : yes; Extended display range (max.) : 6.4 bar: 92.8 psi

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.0124...0.25 bar: -12.4...250 mbar: -5...100.4 inH2O; Set point SP : -12...400 mbar: -4.8...160.6 inH2O; Reset point rP : -12.4...399.6 mbar: -5...160.4 inH2O; Analogue start point : -12.4...337.6 mbar: -5...135.5 inH2O; Analogue end point : 50...400 mbar: 20.1...160.6 inH2O; In steps of : 0.2 mbar: 0.1 inH2O; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread sealing cone - Attention: The unit must only be installed in a process connection for G1 sealing cone.; The G1A sealing cone of the unit is only suited for adapters with metal end stop.; With scale : yes; Extended display range (max.) : 400 mbar: 160.6 inH2O

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.124...2.5 bar: -124...2500 mbar: -1.8...36.27 psi; Set point SP : -0.12...4 bar: -1.74...58.02 psi; Reset point rP : -0.124...3.996 bar: -1.8...57.96 psi; Analogue start point : -0.124...3.37 bar: -1.8...48.87 psi; Analogue end point : 0.5...4 bar: 7.26...58.02 psi; In steps of : 0.002 bar: 0.03 psi; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread sealing cone - Attention: The unit must only be installed in a process connection for G1 sealing cone.; The G1A sealing cone of the unit is only suited for adapters with metal end stop.; With scale : yes; Extended display range (max.) : 4 bar: 58.02 psi

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.05...1 bar: -50...1000 mbar: -0.73...14.5 psi; Set point SP : -0.048...1.6 bar: -0.7...23.21 psi; Reset point rP : -0.05...1.598 bar: -0.73...23.18 psi; Analogue start point : -0.05...1.35 bar: -0.73...19.58 psi; Analogue end point : 0.2...1.6 bar: 2.9...23.21 psi; In steps of : 0.001 bar: 0.01 psi; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread sealing cone - Attention: The unit must only be installed in a process connection for G1 sealing cone.; The G1A sealing cone of the unit is only suited for adapters with metal end stop.; With scale : yes; Extended display range (max.) : 1.6 bar: 23.21 psi

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...1 bar: -1000...1000 mbar: -14.5...14.5 psi; Set point SP : -0.998...1.6 bar: -14.48...23.2 psi; Reset point rP : -1...1.598 bar: -14.5...23.18 psi; Analogue start point : -1...1.1 bar: -14.5...15.96 psi; Analogue end point : -0.5...1.6 bar: -7.26...23.2 psi; In steps of : 0.001 bar: 0.02 psi; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread sealing cone - Attention: The unit must only be installed in a process connection for G1 sealing cone.; The G1A sealing cone of the unit is only suited for adapters with metal end stop.; With scale : yes; Extended display range (max.) : 1.6 bar: 23.2 psi

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...1 bar: -1000...1000 mbar: -14.5...14.5 psi; Set point SP : -0.998...1.6 bar: -14.48...23.2 psi; Reset point rP : -1...1.598 bar: -14.5...23.18 psi; Analogue start point : -1...1.1 bar: -14.5...15.96 psi; Analogue end point : -0.5...1.6 bar: -7.26...23.2 psi; In steps of : 0.001 bar: 0.02 psi; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread Aseptoflex Vario; With scale : yes; Extended display range (max.) : 1.6 bar: 23.2 psi

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.005...0.1 bar: -5...100 mbar: -2...40.15 inH2O; Set point SP : -4.8...160 mbar: -1.95...64.25 inH2O; Reset point rP : -5...159.8 mbar: -2.05...64.15 inH2O; Analogue start point : -5...135 mbar: -2...54.2 inH2O; Analogue end point : 20...160 mbar: 8.05...64.25 inH2O; In steps of : 0.1 mbar: 0.05 inH2O; Switch point accuracy [% of the span] : < ± 0,5; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,5; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,25; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,2; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,1; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread sealing cone - Attention: The unit must only be installed in a process connection for G1 sealing cone.; The G1A sealing cone of the unit is only suited for adapters with metal end stop.; With scale : yes; Extended display range (max.) : 160 mbar: 64.25 inH2O

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.0124...0.25 bar: -12.4...250 mbar: -5...100.4 inH2O; Set point SP : -12...400 mbar: -4.8...160.6 inH2O; Reset point rP : -12.4...399.6 mbar: -5...160.4 inH2O; Analogue start point : -12.4...337.6 mbar: -5...135.5 inH2O; Analogue end point : 50...400 mbar: 20.1...160.6 inH2O; In steps of : 0.2 mbar: 0.1 inH2O; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread Aseptoflex Vario; With scale : yes; Extended display range (max.) : 400 mbar: 160.6 inH2O

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...4 bar: -14.5...58 psi; Set point SP : -0.99...6.4 bar: -14.35...92.8 psi; Reset point rP : -1...6.39 bar: -14.5...92.65 psi; Analogue start point : -1...5.4 bar: -14.5...78.3 psi; Analogue end point : 0...6.4 bar: 0...92.8 psi; In steps of : 0.005 bar: 0.05 psi; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread sealing cone - Attention: The unit must only be installed in a process connection for G1 sealing cone.; The G1A sealing cone of the unit is only suited for adapters with metal end stop.; With scale : yes; Extended display range (max.) : 6.4 bar: 92.8 psi

Pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 75; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.125...2.5 bar: -125...2500 mbar: -1.8...36.25 psi; Set point SP : -0.115...4 bar: -1.65...58 psi; Reset point rP : -0.125...3.99 bar: -1.8...57.85 psi; Analogue start point : -0.125...3.35 bar: -1.8...48.6 psi; Analogue end point : 0.525...4 bar: 7.6...58 psi; In steps of : 0.005 bar: 0.05 psi; Switch point accuracy [% of the span] : < ± 0,5; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line); Hysteresis deviation [% of the span] : < ± 0,25; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (0...70 °C); Response time [ms] : < 9; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 28; Ambient temperature [°C] : -20...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : Al2O3 (ceramics); FKM; stainless steel (1.4404 / 316L); Min. pressure cycles : 100 million; Process connection : threaded connection G 1/2 external thread; Restrictor element integrated : no (can be retrofitted); With scale : yes; Extended display range (max.) : 4 bar: 58 psi

Flush pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Measuring principle : hydrostatic; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 50; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.05...1 bar: -50...1000 mbar: -0.73...14.5 psi; Set point SP : -0.048...1.6 bar: -0.7...23.21 psi; Reset point rP : -0.05...1.598 bar: -0.73...23.18 psi; Analogue start point : -0.05...1.35 bar: -0.73...19.58 psi; Analogue end point : 0.2...1.6 bar: 2.9...23.21 psi; In steps of : 0.001 bar: 0.01 psi; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,05; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...70 °C); Response time [ms] : < 10; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 25; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread Aseptoflex Vario; With scale : yes; Extended display range (max.) : 1.6 bar: 23.21 psi

Pressure sensor with analogue display; Operating voltage [V] : 18...32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 6; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 75; Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Max. load [Ω] : (Ub - 10 V) / 20 mA; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.005...0.1 bar: -5...100 mbar: -2...40.16 inH2O; Set point SP : -4.6...160 mbar: -1.84...64.24 inH2O; Reset point rP : -5...159.6 mbar: -2...64.08 inH2O; Analogue start point : -5...135 mbar: -2...54.24 inH2O; Analogue end point : 20...160 mbar: 8...64.24 inH2O; In steps of : 0.2 mbar: 0.08 inH2O; Switch point accuracy [% of the span] : < ± 0,6; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,35 (BFSL) / < ± 0,6 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line); Hysteresis deviation [% of the span] : < ± 0,5; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,3; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,3; (0...70 °C); Response time [ms] : < 9; Damping for the switching output dAP [s] : 0.01...30; Damping for the analogue output dAA [s] : 0.01...30; Step response time analogue output [ms] : 28; Ambient temperature [°C] : -20...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PA; FKM; PTFE; viewing glass: laminated safety glass 4 mm; Materials (wetted parts) : Al2O3 (ceramics); FKM; stainless steel (1.4404 / 316L); Min. pressure cycles : 100 million; Process connection : threaded connection G 1/2 external thread; Restrictor element integrated : no (can be retrofitted); With scale : yes; Extended display range (max.) : 160 mbar: 64.24 inH2O