VEX-ELIMECS company logo
Catalog>IFM>Process sensors>Pressure sensors>Two switching outputs>Ifm – PP2001
Previous Product

Ifm – PP2001

PRESSURE SENSORS ⍾ Ifm – PP2001
Qty
Programming/display unit; Operating voltage [V] : 18…32 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 1.5…10; (depending on the connected sensor); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Max. measuring/display cycle [ms] : 200; Parameter setting options : depending on the connected sensor; Ambient temperature [°C] : -25…80; Storage temperature [°C] : -40…100; Materials : stainless steel (1.4404 / 316L); CO-PC; PBT; FKM; Items supplied : jumper cables: 0,8 m, for parameter setting in the offline mode
ConnectionConnector: 1 x M12; Contacts: gold-plated
No. of inputs/outputsNumber of digital outputs: 2
Current consumption< 40 mA
Voltage supply24 V
DisplayDisplay unit: 6 x LED, green | switching status: 2 x LED, yellow | function display: alphanumeric display, 4-digit | measured values: alphanumeric display, 4-digit
Degree of protectionIP 67; (for unit with screwed-on connectors)
Weight333.5 g
Dimensions100 x 34 x 48 mm
Search Icon Browse TWO SWITCHING OUTPUTS catalog

Downloads

PDF
IFM PP2001 Datasheet PDF
Download
Next Product

Related in Two switching outputs ⍾ Page 1

Ifm – PV7004
Product details
PV7004 - Ifm
Pressure switch with IO-Link; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.5...145 psi: -100...1000 kPa: -0.1...1 MPa; Set point SP : -0.9...10 bar: -13.1...145 psi: -0.09...1 MPa; Reset point rP : -0.95...9.95 bar: -13.8...144.3 psi: -0.095...0.995 MPa; In steps of : 0.005 bar: 0.1 psi: 0.0005 MPa; Factory setting : SP1 = 2.5 bar: rP1 = 2.3 bar: ou1 = Hno; | SP2 = 7.5 bar: rP2 = 7.3 bar: ou2 = Hno; | dS1/dS2 = 0 ms: dr1/dr2 = 0 ms | coF = 0 %: P-n = PnP: dAP= 60 ms; Switch point accuracy [% of the span] : < ± 0,5 (nach DIN EN 61298-2); Repeatability [% of the span] : < ± 0,05; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,1 (BFSL) / < ± 0,2 (LS); Hysteresis deviation [% of the span] : < ± 0,2; Long-term stability [% of the span] : < ± 0,1; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Temperature coefficient span [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Response time [ms] : < 3; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 713; Ambient temperature [°C] : -40...90; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI; Materials (wetted parts) : stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630); Min. pressure cycles : 60 million; (at 1.2 times nominal pressure); Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : yes
Ifm – PV7000
Product details
PV7000 - Ifm
Pressure switch with IO-Link; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...400 bar: 0...5800 psi: 0...40 MPa; Set point SP : 4...400 bar: 58...5802 psi: 0.4...40 MPa; Reset point rP : 2...398 bar: 30...5773 psi: 0.2...39.8 MPa; In steps of : 0.2 bar: 1 psi: 0.02 MPa; Factory setting : SP1 = 100 bar: rP1 = 92 bar: ou1 = Hno; | SP2 = 300 bar: rP2 = 292 bar: ou2 = Hno; | dS1/dS2 = 0 ms: dr1/dr2 = 0 ms | coF = 0 %: P-n = PnP: dAP= 60 ms; Switch point accuracy [% of the span] : < ± 0,5 (nach DIN EN 61298-2); Repeatability [% of the span] : < ± 0,05; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,1 (BFSL) / < ± 0,2 (LS); Hysteresis deviation [% of the span] : < ± 0,2; Long-term stability [% of the span] : < ± 0,1; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Temperature coefficient span [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Response time [ms] : < 3; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 708; Ambient temperature [°C] : -40...90; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI; Materials (wetted parts) : stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630); Min. pressure cycles : 60 million; (at 1.2 times nominal pressure); Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : yes
Ifm – PV7003
Product details
PV7003 - Ifm
Pressure switch with IO-Link; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...25 bar: -14.6...362.6 psi: -0.1...2.5 MPa; Set point SP : -0.75...25 bar: -10.8...362.6 psi: -0.075...2.5 MPa; Reset point rP : -0.87...24.88 bar: -12.7...360.8 psi: -0.087...2488 MPa; In steps of : 0.01 bar: 0.1 psi: 0.001 MPa; Factory setting : SP1 = 6.25 bar: rP1 = 5.75 bar: ou1 = Hno; | SP2 = 18.75 bar: rP2 = 18.25 bar: ou2 = Hno; | dS1/dS2 = 0 ms: dr1/dr2 = 0 ms | coF = 0 %: P-n = PnP: dAP= 60 ms; Switch point accuracy [% of the span] : < ± 0,5 (nach DIN EN 61298-2); Repeatability [% of the span] : < ± 0,05; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,1 (BFSL) / < ± 0,2 (LS); Hysteresis deviation [% of the span] : < ± 0,2; Long-term stability [% of the span] : < ± 0,1; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Temperature coefficient span [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Response time [ms] : < 3; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 712; Ambient temperature [°C] : -40...90; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI; Materials (wetted parts) : stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630); Min. pressure cycles : 60 million; (at 1.2 times nominal pressure); Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : yes
Ifm – PV7023
Product details
PV7023 - Ifm
Pressure switch with IO-Link; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...60 bar: 0...870 psi: 0...6 MPa; Set point SP : 0.6...60 bar: 9...870 psi: 0.06...6 MPa; Reset point rP : 0.3...59.7 bar: 4...866 psi: 0.03...5.97 MPa; In steps of : 0.02 bar: 1 psi: 0.002 MPa; Factory setting : SP1 = 15 bar: rP1 = 13.8 bar: ou1 = Hno; | SP2 = 45 bar: rP2 = 43.8 bar: ou2 = Hno; | dS1/dS2 = 0 ms: dr1/dr2 = 0 ms | coF = 0 %: P-n = PnP: dAP= 60 ms; Switch point accuracy [% of the span] : < ± 0,5 (nach DIN EN 61298-2); Repeatability [% of the span] : < ± 0,05; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,1 (BFSL) / < ± 0,2 (LS); Hysteresis deviation [% of the span] : < ± 0,2; Long-term stability [% of the span] : < ± 0,1; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Temperature coefficient span [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Response time [ms] : < 3; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 711; Ambient temperature [°C] : -40...90; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI; Materials (wetted parts) : stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630); Min. pressure cycles : 60 million; (at 1.2 times nominal pressure); Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : yes
Ifm – PV7001
Product details
PV7001 - Ifm
Pressure switch with IO-Link; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...250 bar: 0...3626 psi: 0...25 MPa; Set point SP : 2.5...250 bar: 37...3626 psi: 0.25...25 MPa; Reset point rP : 1.3...248.8 bar: 18...3608 psi: 0.13...24.88 MPa; In steps of : 0.1 bar: 1 psi: 0.01 MPa; Factory setting : SP1 = 62.5 bar: rP1 = 57.5 bar: ou1 = Hno; | SP2 = 187.5 bar: rP2 = 182.5 bar: ou2 = Hno; | dS1/dS2 = 0 ms: dr1/dr2 = 0 ms | coF = 0 %: P-n = PnP: dAP= 60 ms; Switch point accuracy [% of the span] : < ± 0,5 (nach DIN EN 61298-2); Repeatability [% of the span] : < ± 0,05; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,1 (BFSL) / < ± 0,2 (LS); Hysteresis deviation [% of the span] : < ± 0,2; Long-term stability [% of the span] : < ± 0,1; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Temperature coefficient span [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Response time [ms] : < 3; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 709; Ambient temperature [°C] : -40...90; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI; Materials (wetted parts) : stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630); Min. pressure cycles : 60 million; (at 1.2 times nominal pressure); Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : yes
Ifm – PV7002
Product details
PV7002 - Ifm
Pressure switch with IO-Link; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...100 bar: 0...1450 psi: 0...10 MPa; Set point SP : 1...100 bar: 15...1450 psi: 0.1...10 MPa; Reset point rP : 0.5...99.5 bar: 7...1443 psi: 0.05...9.95 MPa; In steps of : 0.05 bar: 1 psi: 0.005 MPa; Factory setting : SP1 = 25 bar: rP1 = 23 bar: ou1 = Hno; | SP2 = 75 bar: rP2 = 73 bar: ou2 = Hno; | dS1/dS2 = 0 ms: dr1/dr2 = 0 ms | coF = 0 %: P-n = PnP: dAP= 60 ms; Switch point accuracy [% of the span] : < ± 0,5 (nach DIN EN 61298-2); Repeatability [% of the span] : < ± 0,05; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,1 (BFSL) / < ± 0,2 (LS); Hysteresis deviation [% of the span] : < ± 0,2; Long-term stability [% of the span] : < ± 0,1; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Temperature coefficient span [% of the span / 10 K] : < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C); Response time [ms] : < 3; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 710; Ambient temperature [°C] : -40...90; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI; Materials (wetted parts) : stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630); Min. pressure cycles : 60 million; (at 1.2 times nominal pressure); Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : yes
Ifm – PP7556
Product details
PP7556 - Ifm
Pressure switch with ceramic measuring cell; Operating voltage [V] : 9.6...36 DC; (communication mode: 18...32); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...2.5 bar: 0...2500 mbar: 0...36.3 psi: 0...250 kPa; Set point SP : 0.02...2.5 bar: 0.4...36.2 psi: 2...250 kPa; Reset point rP : 0.01...2.49 bar: 0.2...36 psi: 1...249 kPa; In steps of : 0.01 bar: 0.2 psi: 1 kPa; Factory setting : SP1 = 0.63 bar: rP1 = 0.58 bar | SP2 = 1.88 bar: rP2 = 1.83 bar | OUT1 = Hno: OUT2 = Hno; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; Long-term stability [% of the span] : < ± 0,1; (per year); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...80 °C); Response time [ms] : < 3; Damping for the switching output dAP in steps [s] : 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 7; Ambient temperature [°C] : -25...85; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4301 / 304); FKM; EPDM/X; PA; Materials (wetted parts) : stainless steel (1.4305 / 303); ceramics; FKM; Min. pressure cycles : 100 million; Process connection : threaded connection G 1/4 external thread internal thread:M5; Restrictor element integrated : no (can be retrofitted); Teach function : yes
Ifm – PP0520
Product details
PP0520 - Ifm
Pressure switch with ceramic measuring cell; Operating voltage [V] : 9.6...36 DC; (communication mode: 18...32); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Total number of outputs : 2; Output signal : switching signal; Electrical design : NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...400 bar: 0...5800 psi: 0...40 MPa; Set point SP : 4...400 bar: 60...5790 psi: 0.4...40 MPa; Reset point rP : 2...398 bar: 30...5760 psi: 0.2...39.8 MPa; In steps of : 2 bar: 30 psi: 0.2 MPa; Factory setting : SP1 = 100 bar: rP1 = 92 bar | SP2 = 300 bar: rP2 = 292 bar | OUT1 = Hno: OUT2 = Hno; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; Long-term stability [% of the span] : < ± 0,1; (per year); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...80 °C); Response time [ms] : < 3; Damping for the switching output dAP in steps [s] : 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500; Ambient temperature [°C] : -25...85; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4301 / 304); FKM; EPDM/X; PA; Materials (wetted parts) : stainless steel (1.4305 / 303); ceramics; FKM; Min. pressure cycles : 100 million; Process connection : threaded connection G 1/4 external thread internal thread:M5; Restrictor element integrated : yes; Teach function : yes
Ifm – PP0523
Product details
PP0523 - Ifm
Pressure switch with ceramic measuring cell; Operating voltage [V] : 9.6...36 DC; (communication mode: 18...32); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Total number of outputs : 2; Output signal : switching signal; Electrical design : NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...25 bar: 0...363 psi: 0...2.5 MPa; Set point SP : 0.2...25 bar: 4...362 psi: 0.02...2.5 MPa; Reset point rP : 0.1...24.9 bar: 2...360 psi: 0.01...2.49 MPa; In steps of : 0.1 bar: 2 psi: 0.01 MPa; Factory setting : SP1 = 6.3 bar: rP1 = 5.8 bar | SP2 = 18.8 bar: rP2 = 18.3 bar | OUT1 = Hno: OUT2 = Hno; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; Long-term stability [% of the span] : < ± 0,1; (per year); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...80 °C); Response time [ms] : < 3; Damping for the switching output dAP in steps [s] : 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500; Ambient temperature [°C] : -25...85; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4301 / 304); FKM; EPDM/X; PA; Materials (wetted parts) : stainless steel (1.4305 / 303); ceramics; FKM; Min. pressure cycles : 100 million; Process connection : threaded connection G 1/4 external thread internal thread:M5; Restrictor element integrated : no (can be retrofitted); Teach function : yes
Ifm – PP0522
Product details
PP0522 - Ifm
Pressure switch with ceramic measuring cell; Operating voltage [V] : 9.6...36 DC; (communication mode: 18...32); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Total number of outputs : 2; Output signal : switching signal; Electrical design : NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...100 bar: 0...1450 psi: 0...10 MPa; Set point SP : 1...100 bar: 20...1450 psi: 0.1...10 MPa; Reset point rP : 0.5...99.5 bar: 10...1440 psi: 0.05...9.95 MPa; In steps of : 0.5 bar: 10 psi: 0.05 MPa; Factory setting : SP1 = 25.0 bar: rP1 = 23.0 bar | SP2 = 75.0 bar: rP2 = 73.0 bar | OUT1 = Hno: OUT2 = Hno; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; Long-term stability [% of the span] : < ± 0,1; (per year); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...80 °C); Response time [ms] : < 3; Damping for the switching output dAP in steps [s] : 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500; Ambient temperature [°C] : -25...85; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4301 / 304); FKM; EPDM/X; PA; Materials (wetted parts) : stainless steel (1.4305 / 303); ceramics; FKM; Min. pressure cycles : 100 million; Process connection : threaded connection G 1/4 external thread internal thread:M5; Restrictor element integrated : no (can be retrofitted); Teach function : yes
Ifm – PP0524
Product details
PP0524 - Ifm
Pressure switch with ceramic measuring cell; Operating voltage [V] : 9.6...36 DC; (communication mode: 18...32); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Total number of outputs : 2; Output signal : switching signal; Electrical design : NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.5...145 psi: -100...1000 kPa: -0.1...1 MPa; Set point SP : -0.9...10 bar: -13...145 psi: -0.09...1 MPa; Reset point rP : -0.95...9.95 bar: -14...144 psi: -0.095...0.995 MPa; In steps of : 0.05 bar: 1 psi: 0.005 MPa; Factory setting : SP1 = 2.50 bar: rP1 = 2.30 bar | SP2 = 7.50 bar: rP2 = 7.30 bar | OUT1 = Hno: OUT2 = Hno; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; Long-term stability [% of the span] : < ± 0,1; (per year); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...80 °C); Response time [ms] : < 3; Damping for the switching output dAP in steps [s] : 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500; Ambient temperature [°C] : -25...85; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4301 / 304); FKM; EPDM/X; PA; Materials (wetted parts) : stainless steel (1.4305 / 303); ceramics; FKM; Min. pressure cycles : 100 million; Process connection : threaded connection G 1/4 external thread internal thread:M5; Restrictor element integrated : no (can be retrofitted); Teach function : yes
Ifm – PP004E
Product details
PP004E - Ifm
Pressure switch with ceramic measuring cell; Operating voltage [V] : 9.6...36 DC; (communication mode: 18...32); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.5...145 psi: -100...1000 kPa: -0.1...1 MPa; Set point SP : -0.9...10 bar: -13...145 psi: -0.09...1 MPa; Reset point rP : -0.95...9.95 bar: -14...144 psi: -0.095...0.995 MPa; In steps of : 0.05 bar: 1 psi: 0.005 MPa; Factory setting : SP1 = 2.50 bar: rP1 = 2.30 bar | SP2 = 7.50 bar: rP2 = 7.30 bar | OUT1 = Hno: OUT2 = Hno; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; Long-term stability [% of the span] : < ± 0,1; (per year); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...80 °C); Response time [ms] : < 3; Damping for the switching output dAP in steps [s] : 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 6; Ambient temperature [°C] : -25...85; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4301 / 304); FKM; EPDM/X; PA; Materials (wetted parts) : stainless steel (1.4305 / 303); ceramics; FKM; Min. pressure cycles : 100 million; Process connection : threaded connection G 1/4 external thread internal thread:M5; Restrictor element integrated : no (can be retrofitted); Teach function : yes