Ifm – SM0505

Operating voltage [V] : 18...32 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; (≤ 22 mA); Max. load [Ω] : 500; Measuring range : 5...300 l/min: 0.3...18 m³/h: 80...4755 gph: 1.3...79.3 gpm; Display range : -360...360 l/min: -21.6...21.6 m³/h: -5705...5705 gph: -95.1...95.1 gpm; Resolution : 0.5 l/min: 0.02 m³/h: 5 gph: 0.1 gpm; Analogue start point ASP : 0...240 l/min: 0...14.4 m³/h: 0...3800 gph: 0...63.4 gpm; Analogue end point AEP : 60...300 l/min: 3.6...18 m³/h: 955...4755 gph: 15.9...79.3 gpm; Low flow cut-off LFC : < 15 l/min: < 0.9 m³/h: < 240 gph: 15 l/min) / T09 = 3 (Q > 4 gpm); Response time [s] : 0.35; (dAP = 0); Damping for the switching output dAP [s] : 0...5; Parameter setting options : display can be deactivated; Display unit; empty pipe detection; Ambient temperature : -10...60 °C: 14...140 °F; Storage temperature : -25...80 °C: -13...176 °F; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEI; FKM; PBT-GF20; TPE-U; Materials (wetted parts) : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; FKM; Process connection : threaded connection 1 1/2" NPT DN40; Display unit : l/min; m³/h; gpm; gph; °C; °F; Items supplied : Label

Magnetic-inductive flow meter; Operating voltage [V] : 18...32 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; (≤ 22 mA; scalable); Max. load [Ω] : 500; Measuring range : 5...300 l/min: 0.3...18 m³/h: 80...4755 gph: 1.3...79.3 gpm; Display range : -360...360 l/min: -21.6...21.6 m³/h: -5705...5705 gph: -95.1...95.1 gpm; Resolution : 0.5 l/min: 0.02 m³/h: 5 gph: 0.1 gpm; Analogue start point ASP : 0...240 l/min: 0...14.4 m³/h: 0...3800 gph: 0...63.4 gpm; Analogue end point AEP : 60...300 l/min: 3.6...18 m³/h: 955...4755 gph: 15.9...79.3 gpm; Low flow cut-off LFC : < 15 l/min: < 0.9 m³/h: < 240 gph: 15 l/min) / T09 = 3 (Q > 4 gpm); Response time [s] : 0.35; (dAP = 0); Damping for the switching output dAP [s] : 0...5; Parameter setting options : display can be deactivated; Display unit; empty pipe detection; Ambient temperature : -10...60 °C: 14...140 °F; Storage temperature : -25...80 °C: -13...176 °F; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEI; FKM; PBT-GF20; TPE-U; Materials (wetted parts) : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; Centellen; FKM; Process connection : threaded connection G 2 DN50 flat seal; Display unit : l/min; m³/h; gpm; gph; °C; °F; Items supplied : sealings: 2, Centellen | Label

Magnetic-inductive flow meter; Operating voltage [V] : 18...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 200; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 6...1584 gph: 0.1...26.4 gpm; Display range : -1902...1902 gph: -31.7...31.7 gpm; Resolution : 2 gph: 0.05 gpm; Set point SP : 14...1586 gph: 0.25...26.4 gpm; Reset point rP : 6...1578 gph: 0.1...26.25 gpm; Analogue start point ASP : 0...1272 gph: 0...21.2 gpm; Analogue end point AEP : 312...1586 gph: 5.2...26.4 gpm; In steps of : 2 gph: 0.05 gpm; Pulse value : 0.01...100 000 000 gal; Pulse length [s] : 0,0025...2; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 0,26 gpm); Response time [s] : 0.15; (dAP = 0, T19); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...5; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/pulse output; start-up delay; display can be deactivated; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 3; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 576; Ambient temperature [°F] : 14...140; Storage temperature [°F] : -13...176; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection G 1 DN25 flat seal

Magnetic-inductive flow meter; Operating voltage [V] : 18...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 200; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0.2...100 l/min: 0.01...6 m³/h; Display range : -120...120 l/min: -7.2...7.2 m³/h; Resolution : 0.1 l/min: 0.005 m³/h; Set point SP : 0.7...100 l/min: 0.04...6 m³/h; Reset point rP : 0.2...99.5 l/min: 0.01...5.97 m³/h; Analogue start point ASP : 0...80 l/min: 0...4.8 m³/h; Analogue end point AEP : 20...100 l/min: 1.2...6 m³/h; In steps of : 0.1 l/min: 0.005 m³/h; Pulse value : 0.00001...100 000 m³; Pulse length [s] : 0,0025...2; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 5 l/min); Response time [s] : 0.15; (dAP = 0, T19); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...5; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/pulse output; start-up delay; display can be deactivated; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 3; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 575; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection G 1 DN25 flat seal

Operating voltage [V] : 20...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Overload protection : yes; Measuring range : 0.2...50 l/min: 0.02...13.22 gpm; Display range : -60...60 l/min: -15.86...15.86 gpm; Resolution : 0.1 l/min: 0.02 gpm; Analogue start point ASP : 0...40 l/min: 0...10.58 gpm; Analogue end point AEP : 10...50 l/min: 2.64...13.22 gpm; In steps of : 0.1 l/min: 0.02 gpm; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 1 l/min); Response time [s] : 0.15; (dAP = 0, T19); Damping for the switching output dAP [s] : 0...3; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection 3/4" NPT DN20; Display unit : l/min; m³/h; gpm; gph; °C; °F

Operating voltage [V] : 20...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Overload protection : yes; Measuring range : 0.2...100 l/min: 0.1...26.4 gpm; Display range : -120...120 l/min: -31.7...31.7 gpm; Resolution : 0.1 l/min: 0.05 gpm; Analogue start point ASP : 0...80 l/min: 0...21.1 gpm; Analogue end point AEP : 20...100 l/min: 5.3...26.4 gpm; In steps of : 0.1 l/min: 0.05 gpm; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 1 l/min); Response time [s] : 0.15; (dAP = 0, T19); Damping for the switching output dAP [s] : 0...3; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection 1" NPT DN25; Display unit : l/min; m³/h; gpm; gph; °C; °F

Magnetic-inductive flow meter; Operating voltage [V] : 18...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 1; Output signal : analogue signal; IO-Link; (configurable); Permanent current rating of switching output DC [mA] : 250; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Overload protection : yes; Measuring range [l/min] : 0.1...25; Response time [s] : 0.15; (dAP = 0, T19); Dynamic response T05 / T09 [s] : T09 = 20 (Q > 1 l/min); Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Min. process cycle time [ms] : 3; Supported DeviceIDs : Type of operation: DeviceID | Default: 571; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection G 1/2 DN15 flat seal

Operating voltage [V] : 20...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Overload protection : yes; Measuring range : 0.1...25 l/min: 0.03...6.6 gpm; Display range : -30...30 l/min: -7.92...7.92 gpm; Resolution : 0.02 l/min: 0.01 gpm; Analogue start point ASP : 0...20 l/min: 0...5.28 gpm; Analogue end point AEP : 5...25 l/min: 1.32...6.6 gpm; In steps of : 0.02 l/min: 0.01 gpm; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 1 l/min); Response time [s] : 0.15; (dAP = 0, T19); Damping for the switching output dAP [s] : 0...3; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection 1/2" NPT DN15; Display unit : l/min; m³/h; gpm; gph; °C; °F

Magnetic-inductive flow meter; Operating voltage [V] : 20...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Overload protection : yes; Measuring range : 0.2...100 l/min: 0.1...26.4 gpm; Display range : -120...120 l/min: -31.7...31.7 gpm; Resolution : 0.1 l/min: 0.05 gpm; Analogue start point ASP : 0...80 l/min: 0...21.1 gpm; Analogue end point AEP : 20...100 l/min: 5.3...26.4 gpm; In steps of : 0.1 l/min: 0.05 gpm; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 1 l/min); Response time [s] : 0.15; (dAP = 0, T19); Damping for the switching output dAP [s] : 0...3; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection G 1 DN25 flat seal; Display unit : l/min; m³/h; gpm; gph; °C; °F

Magnetic-inductive flow meter; Operating voltage [V] : 18...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 200; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0.2...100 l/min: 0.01...6 m³/h; Display range : -120...120 l/min: -7.2...7.2 m³/h; Resolution : 0.1 l/min: 0.005 m³/h; Set point SP : 0.7...100 l/min: 0.04...6 m³/h; Reset point rP : 0.2...99.5 l/min: 0.01...5.97 m³/h; Analogue start point ASP : 0...80 l/min: 0...4.8 m³/h; Analogue end point AEP : 20...100 l/min: 1.2...6 m³/h; In steps of : 0.1 l/min: 0.005 m³/h; Pulse value : 0.00001...100 000 m³; Pulse length [s] : 0,0025...2; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 5 l/min); Response time [s] : 0.15; (dAP = 0, T19); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...5; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/pulse output; start-up delay; display can be deactivated; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 3; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 575; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; EPDM; Process connection : threaded connection G 1 DN25 flat seal

Magnetic-inductive flow meter; Operating voltage [V] : 18...30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Total number of outputs : 1; Output signal : analogue signal; IO-Link; (configurable); Permanent current rating of switching output DC [mA] : 250; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Overload protection : yes; Measuring range [l/min] : 0.2...100; Response time [s] : 0.15; (dAP = 0, T19); Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Min. process cycle time [ms] : 3; Supported DeviceIDs : Type of operation: DeviceID | Default: 577; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection G 1 DN25 flat seal

Magnetic-inductive flow meter; Operating voltage [V] : 18...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 200; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0.1...25 l/min: 0.005...1.5 m³/h; Display range : -30...30 l/min: -1.8...1.8 m³/h; Resolution : 0.02 l/min: 0.002 m³/h; Set point SP : 0.25...25 l/min: 0.015...1.5 m³/h; Reset point rP : 0.1...24.9 l/min: 0.005...1.495 m³/h; Analogue start point ASP : 0...20 l/min: 0...1.2 m³/h; Analogue end point AEP : 5...25 l/min: 0.3...1.5 m³/h; In steps of : 0.02 l/min: 0.002 m³/h; Pulse value : 0.00001...30 000 m³; Pulse length [s] : 0,01...2; Dynamic response T05 / T09 [s] : T09 = 20 (Q > 1 l/min); Response time [s] : 0.15; (dAP = 0, T19); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...5; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/pulse output; start-up delay; display can be deactivated; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 3; Process data binary : 2; Min. process cycle time [ms] : 5; Supported DeviceIDs : Type of operation: DeviceID | Default: 569; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; FKM; Process connection : threaded connection G 1/2 DN15 flat seal