Sick – 1000

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Sender; Resolution: 30 mm; Scanning range: 25.2 m; Protective field height: 1,500 mm; Synchronization: Optical synchronisation; Integrated laser alignment aid: ✔; Items supplied: Sender in explosion-proof enclosure with connecting cable, 30 m2 handles including screws; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 15.3 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Beam coding: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 8-wire; Configuration method: DIP switch on system plug; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 1.82 W (DC); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Other information: Wave length: 850 nm; Type of light: Near-infrared (NIR), invisible; Integrated laser alignment aid✔Laser class1Wave length650 nmType of lightVisible red light: Integrated laser alignment aid; Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Sender; Compatible receiver: 1068415; Resolution: 30 mm; Scanning range: 10 m; Protective field height: 1,500 mm; Synchronization: Optical synchronisation; Items supplied: Sender in explosion-proof enclosure with connecting cable, 30 m2 handles including screws; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 3.7 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 5-wire; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 1.2 W (DC); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Other information: Wave length: 850 nm; Type of light: Near-infrared (NIR), invisible; Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Sender; Compatible receiver: 1068409; Resolution: 30 mm; Scanning range: 10 m; Protective field height: 900 mm; Synchronization: Optical synchronisation; Items supplied: Sender in explosion-proof enclosure with connecting cable, 30 m2 handles including screws; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 3.7 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 5-wire; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 1.01 W (DC); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Other information: Wave length: 850 nm; Type of light: Near-infrared (NIR), invisible; Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Sender; Compatible receiver: 1068412; Resolution: 30 mm; Scanning range: 10 m; Protective field height: 1,200 mm; Synchronization: Optical synchronisation; Items supplied: Sender in explosion-proof enclosure with connecting cable, 30 m2 handles including screws; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 3.7 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 5-wire; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 1.1 W (DC); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Other information: Wave length: 850 nm; Type of light: Near-infrared (NIR), invisible; Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Sender; Resolution: 30 mm; Scanning range: 25.2 m; Protective field height: 900 mm; Synchronization: Optical synchronisation; Integrated laser alignment aid: ✔; Items supplied: Sender in explosion-proof enclosure with connecting cable, 30 m2 handles including screws; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 15.3 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Beam coding: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 8-wire; Configuration method: DIP switch on system plug; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 1.53 W (DC); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Other information: Wave length: 850 nm; Type of light: Near-infrared (NIR), invisible; Integrated laser alignment aid✔Laser class1Wave length650 nmType of lightVisible red light: Integrated laser alignment aid; Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Sender; Resolution: 30 mm; Scanning range: 25.2 m; Protective field height: 450 mm; Synchronization: Optical synchronisation; Integrated laser alignment aid: ✔; Items supplied: Sender in explosion-proof enclosure with connecting cable, 30 m2 handles including screws; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 15.3 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Beam coding: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 8-wire; Configuration method: DIP switch on system plug; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 1.31 W (DC); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Other information: Wave length: 850 nm; Type of light: Near-infrared (NIR), invisible; Integrated laser alignment aid✔Laser class1Wave length650 nmType of lightVisible red light: Integrated laser alignment aid; Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Receiver; Compatible sender: 1068413; Resolution: 30 mm; Scanning range: 10 m; Protective field height: 1,200 mm; Response time: 12 ms; Synchronization: Optical synchronisation; Items supplied: Receiver in explosion-proof enclosure with connecting cable, 30 m2 handles including screwsTest rod with diameter corresponding to the resolution of the safety light curtainOperating instructions on CD-ROM; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 3.7 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 5-wire; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 2.21 W (DC); Output signal switching devices (OSSDs)Type of output2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1)ON state, switching voltage HIGH24 V DC (VS – 2.25 V DC ... VS)OFF state, switching voltage LOW≤ 2 V DCCurrent-carrying capacity per OSSD≤ 300 mA: Output signal switching devices (OSSDs); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Receiver; Compatible sender: 1068416; Resolution: 30 mm; Scanning range: 10 m; Protective field height: 1,500 mm; Response time: 13 ms; Synchronization: Optical synchronisation; Items supplied: Receiver in explosion-proof enclosure with connecting cable, 30 m2 handles including screwsTest rod with diameter corresponding to the resolution of the safety light curtainOperating instructions on CD-ROM; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 3.7 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 5-wire; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 2.4 W (DC); Output signal switching devices (OSSDs)Type of output2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1)ON state, switching voltage HIGH24 V DC (VS – 2.25 V DC ... VS)OFF state, switching voltage LOW≤ 2 V DCCurrent-carrying capacity per OSSD≤ 300 mA: Output signal switching devices (OSSDs); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Receiver; Resolution: 30 mm; Scanning range: 25.2 m; Protective field height: 450 mm; Response time: 10 ms (Uncoded)14 ms (code 1 or code 2); Synchronization: Optical synchronisation; Items supplied: Receiver in explosion-proof enclosure with connecting cable, 30 m2 handles including screwsTest rod with diameter corresponding to the resolution of the safety light curtainSafety instructionMounting instructionsOperating instructions on CD-ROM; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 15.3 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Beam coding: ✔; Restart interlock: ✔; External device monitoring (EDM): ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 8-wire; Configuration method: DIP switch on system plug; Display elements: LEDs; Display of the synchronization status of the upper and lower beams: ✔; Application diagnostic output (ADO): ✔; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 3.3 W (DC); Output signal switching devices (OSSDs)Type of output2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1)ON state, switching voltage HIGH24 V DC (VS – 2.25 V DC ... VS)OFF state, switching voltage LOW≤ 2 V DCCurrent-carrying capacity per OSSD≤ 500 mA: Output signal switching devices (OSSDs); Application diagnostic output (ADO)Type of outputPNP semiconductor, short-circuit protected 1)Output voltage HIGH (active)≥ Vs – 3 VOutput voltage LOW (deactivated)High resistanceOutput current HIGH (active)≤ 100 mA: Application diagnostic output (ADO); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Receiver; Resolution: 30 mm; Scanning range: 25.2 m; Protective field height: 600 mm; Response time: 10 ms (Uncoded)15 ms (code 1 or code 2); Synchronization: Optical synchronisation; Items supplied: Receiver in explosion-proof enclosure with connecting cable, 30 m2 handles including screwsTest rod with diameter corresponding to the resolution of the safety light curtainSafety instructionMounting instructionsOperating instructions on CD-ROM; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 15.3 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Beam coding: ✔; Restart interlock: ✔; External device monitoring (EDM): ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 8-wire; Configuration method: DIP switch on system plug; Display elements: LEDs; Display of the synchronization status of the upper and lower beams: ✔; Application diagnostic output (ADO): ✔; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 3.36 W (DC); Output signal switching devices (OSSDs)Type of output2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1)ON state, switching voltage HIGH24 V DC (VS – 2.25 V DC ... VS)OFF state, switching voltage LOW≤ 2 V DCCurrent-carrying capacity per OSSD≤ 500 mA: Output signal switching devices (OSSDs); Application diagnostic output (ADO)Type of outputPNP semiconductor, short-circuit protected 1)Output voltage HIGH (active)≥ Vs – 3 VOutput voltage LOW (deactivated)High resistanceOutput current HIGH (active)≤ 100 mA: Application diagnostic output (ADO); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Receiver; Resolution: 30 mm; Scanning range: 25.2 m; Protective field height: 1,200 mm; Response time: 12 ms (Uncoded)20 ms (code 1 or code 2); Synchronization: Optical synchronisation; Items supplied: Receiver in explosion-proof enclosure with connecting cable, 30 m2 handles including screwsTest rod with diameter corresponding to the resolution of the safety light curtainSafety instructionMounting instructionsOperating instructions on CD-ROM; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 15.3 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Beam coding: ✔; Restart interlock: ✔; External device monitoring (EDM): ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 8-wire; Configuration method: DIP switch on system plug; Display elements: LEDs; Display of the synchronization status of the upper and lower beams: ✔; Application diagnostic output (ADO): ✔; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 3.63 W (DC); Output signal switching devices (OSSDs)Type of output2 PNP semiconductors, short-circuit protected, cross-circuit monitored 1)ON state, switching voltage HIGH24 V DC (VS – 2.25 V DC ... VS)OFF state, switching voltage LOW≤ 2 V DCCurrent-carrying capacity per OSSD≤ 500 mA: Output signal switching devices (OSSDs); Application diagnostic output (ADO)Type of outputPNP semiconductor, short-circuit protected 1)Output voltage HIGH (active)≥ Vs – 3 VOutput voltage LOW (deactivated)High resistanceOutput current HIGH (active)≤ 100 mA: Application diagnostic output (ADO); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620

Features: Application: Explosive areas; Ex-approvals: ATEX for gas: II 2 G Ex db IIB T6ATEX for dust: II 2 D Ex tb IIIC T56°C Db IP6XNFPA 70/NEC 500 Class I, Div. 1, Groups C and DNFPA 70/NEC 500 Class II, Div. 1, Groups E, F and GNFPA 70/NEC 500 Class III, Div. 1; System part: Sender; Resolution: 30 mm; Scanning range: 25.2 m; Protective field height: 600 mm; Synchronization: Optical synchronisation; Integrated laser alignment aid: ✔; Items supplied: Sender in explosion-proof enclosure with connecting cable, 30 m2 handles including screws; Safety-related parameters: Type: Type 4 (IEC 61496-1); Safety integrity level: SIL3 (IEC 61508)SILCL3 (IEC 62061); Category: Category 4 (ISO 13849-1); Performance level: PL e (ISO 13849-1); PFHD (mean probability of a dangerous failure per hour): 15.3 x 10-9; TM (mission time): 20 years (ISO 13849-1); Safe state in the event of a fault: At least one OSSD is in the OFF state.; Functions: Protective operation: ✔; Automatic calibration of the protective field width: ✔; Beam coding: ✔; Interfaces: System connection: Connecting cable, 30 m, flying lead, 8-wire; Configuration method: DIP switch on system plug; Display elements: LEDs; Fieldbus, industrial networkIntegration via Flexi Soft safety controllerCANopen DeviceNet™ EtherCAT® EtherNet/IP™Modbus TCPPROFIBUS DPPROFINET: Fieldbus, industrial network; Electrical data: Protection class: III (IEC 61140); Supply voltage VS: 24 V DC (19.2 V ... 28.8 V); Ripple: ≤ 10 %; Power consumption typical: 1.38 W (DC); Mechanical data: Dimensions: See dimensional drawing; Housing cross-section: 161.8 mm x 142.1 mm; Housing material: Aluminum cast/AlSi7Mg0.6; Ambient data: Enclosure rating: IP65 (IEC 60529)IP66 (IEC 60529); Ambient operating temperature: –20 °C ... +55 °C; Storage temperature: –30 °C ... +70 °C; Air humidity: 15 % ... 95 %, Non-condensing; Vibration resistance: IEC 60068-2-6; Shock resistance: 10 g, 16 ms (IEC 60068-2-27); Other information: Wave length: 850 nm; Type of light: Near-infrared (NIR), invisible; Integrated laser alignment aid✔Laser class1Wave length650 nmType of lightVisible red light: Integrated laser alignment aid; Classifications: ECl@ss 5.0: 27272704; ECl@ss 5.1.4: 27272704; ECl@ss 6.0: 27272704; ECl@ss 6.2: 27272704; ECl@ss 7.0: 27272704; ECl@ss 8.0: 27272704; ECl@ss 8.1: 27272704; ECl@ss 9.0: 27272704; ECl@ss 10.0: 27272704; ECl@ss 11.0: 27272704; ETIM 5.0: EC002549; ETIM 6.0: EC002549; ETIM 7.0: EC002549; UNSPSC 16.0901: 46171620