Abb – 2CDG110198R0011

For controlling DALI devices via the ABB i-bus® KNX. Two DALI outputs for up to 2 x 64 DALI slaves. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI slave (2 x 64), with lighting groups (2 x 16), together in broadcast or per scenes (2 x 16). DALI devices type DT1 (Self-contained emergency converter acc. EN 62386-202) and type DT8 (colour temperature Tc / tunable white acc. EN 62386-209) will be supported. Extensive fault and error messages are available. By means of KNX and DT1 converter different emergencytests (e.g. function and duration test) can be triggered, test results are transferred back to KNX. With DT8 devices Dim2Warm, HCL, set and dim colour temperature are possible. Slave-, staircase-, force-, block- and scene- function are integrated. Feedback is sent. DALI telegram rate can change.For diagnostic use and individual change of the DALI address or group assignment a separate Software-Tool is available.

For controlling DALI devices via the ABB i-bus® KNX. One DALI output for up to 64 DALI slaves. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI slave (64), with 16 lighting groups, together in broadcast or per scenes (16). DALI devices type DT1 (Self-contained emergency converter acc. EN 62386-202) and type DT8 (colour temperature Tc / tunable white acc. EN 62386-209) will be supported. Extensive fault and error messages are available. By means of KNX and DT1 converter different emergency tests (e.g. function and duration test) can be triggered, test results are transferred back to KNX. With DT8 devices Dim2Warm, HCL, set and dim colour temperature are possible. Slave-, staircase-, force-, block- and scene- function are integrated. Feedback is sent. DALI telegram rate can change. For diagnostic use and individual change of the DALI address or group assignment a separate Software-Tool is available.

For controlling DALI devices via the ABB i-bus®. Two DALI output for up to 2x64 DALI slaves. DALI power supply is integrated. Control and status feedback is carried out via KNX per DALI slave (2x64), with groups (2x16), together in broadcast or per scenes (2x16). Extensive fault and error messages are available Self-contained emergency converter (2x64) acc. EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered. Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.For diagnostic use and individual change of the DALI address or group assignment a separate Software-Tool is available

Surface mounting Device for switching and dimming of 8 independent groups of luminaries. Up to 64 DALI participants can be connected to one DALI control line. When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant light control. Additionally a staircase and master / slave function is integrated. A great number of status feedback e.g. lamp and ballast fault can be transferred from DALI to KNX. With this functions the DALI light controller is a key factor in every energy efficient building automation. With his surface mounting housing it is possible to insert the device central in false ceiling or underfloor installation.

Device for switching and dimming of 16 independent groups of luminaries. Up to 64 DALI participants can be connected to one DALI control line. When combined with the light sensor LF/U 2.1 the device can be used as a 8-fold light controller for constant light control. Additionally a staircase and master / slave function is integrated. A great number of status feedback e.g. lamp and ballast fault can be transferred from DALI to KNX. With this functions the DALI light controller is a key factor in every energy efficient building automation.

DALI gateway, 8-fold, MDRC For controlling DALI devices (electronic ballasts, transformers etc.) via the ABB i-bus®. There are 8 separate, independent DALI outputs/channels available. Up to 16 DALI devices can be connected per channel with a maximum of 128 devices on the gateway. The functions of switching, dimming, set values and fault indication for lamps and electronic ballasts are available for each output. It is possible to set the lamp burning time and 16 lightscenes. The addressing or commissioning of the DALI devices is not necessary.