Siemens – 1FE1084-6LN00-8NW8-ZV26X11

SIMOTICS M Built-in synchronous motor Individual component stator PN = 48 kW, NN = 780 rpm MN = 585 Nm, Nmax = 3500 rpm DC link 600 V, IP00, Water cooling Encapsulated winding Standard protection, Pt1000 Special stator, see Z option Free cable ends, L = 0.5 m Cable outlet at small cooling jacket diameter V09: Threaded hole on both sides on cooling jacket

SIMOTICS M Built-in synchronous motor Individual component stator PN = 41.9 kW, NN = 1000 rpm MN = 400 Nm, Nmax = 3500 rpm DC link 600 V, IP00, Air cooling Encapsulated winding Standard protection, Pt1000 Special stator, see Z option Free cable ends, L = 0.5 m Cable outlet at large cooling jacket diameter V34: Special cooling jacket

SIMOTICS M Built-in synchronous motor DC link 600 V, 105K, IP00, 8-pole Individual components: Stator 820 Nm, In=130 A, 64.4 kW NN=750 rpm, Nmax=3500 rpm VPM required Temperature sensor KTY84 Water-cooled Overhead encapsulation with standard protection 2x temp. sensor Standard cooling jacket Bare cable ends L=0.5 m Cable outlet at large cooling jacket diameter W07: Cable outlet 3x 2x 16 mm2

SIMOTICS M Built-in synchronous motor Individual component stator PN = 64.4 kW, NN = 750 rpm MN = 820 Nm, Nmax = 3500 rpm DC link 600 V, IP00, Water cooling Encapsulated winding Full protection PTC,Pt1000 Standard cooling jacket Special cable X35: Cable length 3.5 m Cable outlet at large cooling jacket diameter

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 8-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 820 NM, IN=200 A, 103 KW, NN=1200 REV/MIN, NMAX=5500 REV/MIN, VPM REQUIRED; WATER-COOLED; OVERHANG ENCAPSULATION; + FULL PROTECT. (KTY+PTC); STANDARD COOLING JACKET; ROTOR SLEEVE IDM=150 MM; FREE LEAD ENDS L=0.5 M

SIMOTICS M Built-in synchronous motor Individual component stator PN = 67.4 kW, NN = 1100 rpm MN = 585 Nm, Nmax = 5000 rpm DC link 600 V, IP00, Water cooling Encapsulated winding Universal protection NTC,PTC,Pt1000 Standard cooling jacket Special cable X35: Cable length 3.5 m Cable outlet at large cooling jacket diameter

SIMOTICS M Built-in synchronous motor Individual component stator, rotor DC link 600V, water cooling, IP00 PN=35.1kW, NN=780rpm MN=430Nm, Nmax=3500rpm Temperature sensor Pt1000 water-cooled Overhead encapsulation +full protection (2x temp. sensor) V09: Special cooling jacket with thread on both sides T55: Special sleeve IDM=110mm Bare cable ends L=0.5 m

SIMOTICS M Built-in synchronous motor DC link 600V, 105K, IP00, 6-pole Individual components: rotor stator, 200Nm, In=84A, 29kW NN=1400rpm, Nmax=6500rpm VPM required KTY84 Temperature sensor WATER-COOLED; OVERHANG ENCAPSULATION WITH STANDARD PROTECTION ; STANDARD COOLING JACKET; ROTOR SLEEVE IDM=82 MM; FREE LEAD ENDS L=0.5 M

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 155 NM, IN=90 A, 48,7 KW, NN=3000 REV/MIN, NMAX=12000 REV/MIN, VPM REQUIRED

SIMOTICS M Built-in synchronous motor stator and rotor DC link 600 V, 105 K, IP00, 8-POLE, Water-cooled 585Nm, IN=105A, 53.9 KW, NN=880RPM, NMAX=4000RPM "VPM required standard protection 2x temp. sensor Temp. sensor Pt1000 Rotor sleeve IDM=150 mm Bare cable ends L=1.5m V80: encapsulated without cooling jacket

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 265 NM, IN=85 A, 41,6 KW, NN=1500 REV/MIN, NMAX=6500 REV/MIN, VPM REQUIRED

SIMOTICS M Built-in synchronous motor Individual component stator, rotor PN = 20.9 kW, NN = 1000 rpm MN = 200 Nm, Nmax = 6000 rpm DC link 600 V, IP00, Water cooling Encapsulated winding Standard protection, Pt1000 Standard cooling jacket Special rotor, see Z option Free cable ends, L = 0.5 m Cable outlet at small cooling jacket diameter T54: Rotor with sleeve d=110 mm