Siemens – 1FT5106-0AF71-1-Z G51

AC FEED DRIVE MOTOR, DC LINK 600 V, 45 NM, 100 K, 3000 RPM, AIR COOLING, TACHOGENERATOR A.SHAFT POSITION ENCODER,IP64,IM B5 (IM V1,IM 3) POWER AND SIGNAL CONNECTORS G45: BUILT-IN HOLDING BRAKE K04: ROTATIONAL ACCURACY TOLERANCE R K42: DRIVE END SHAFT EXTENSION VERSION "B" K84: TERMINAL BOX/CONNECTOR TURNED BY 90 DEGR. CABLE ENTRY FROM NON-DRIVE END K93: DEGREE OF PROTECTION,IP 67

AC FEED DR. MOTOR,UDC LINK 600V 45 NM, 100 K, 2000 RPM; AIR COOLING, TACHOGENERATOR A. SHAFT POSITION ENCODER, IP64, IM B5 (IM V1, IM V3) POWER AND SIGNAL CONNECTORS CONNECTOR OUTGOING DIRECTION, TRAVERSE RIGHT TACHOMETER GENERATOR, SHAFT POSITION ENCODER SHAFT WITH FEATHER KEY/KEYWAY, WITH HOLDING BRAKE;

AC FEED DRIVE MOTOR, DC LINK 600 V, 90 NM, 100 K, 2000 RPM, AIR COOLING, TACHOGENERATOR A.SHAFT POSITION ENCODER,IP64,IM B5 (IM V1,IM 3) POWER AND SIGNAL CONNECTORS

AC FEED DRIVE MOTOR, DC LINK 600 V, 90 NM, 100 K, 2000 RPM, AIR COOLING, TACHOGENERATOR A.SHAFT POSITION ENCODER,IP64,IM B5 (IM V1,IM 3) POWER AND SIGNAL CONNECTORS FLAT RATE FOR OPTION Y69 G45: BUILT-IN HOLDING BRAKE

AC FEED DR. MOTOR,UDC LINK 600V 68 NM, 100 K, 2000 RPM; AIR COOLING, TACHOGENERATOR A. SHAFT POSITION ENCODER, IP64, IM B5 (IM V1, IM V3) POWER AND SIGNAL CONNECTORS CONNECTOR OUTGOING DIRECTION, TRAVERSE RIGHT TACHOMETER GENERATOR, SHAFT POSITION ENCODER SHAFT WITH FEATHER KEY/KEYWAY WITHOUT HOLDING BRAKE;

AC FEED DRIVE MOTOR, DC LINK 600 V, 90 NM, 100 K, 2000 RPM, AIR COOLING, TACHOGENERATOR A.SHAFT POSITION ENCODER,IP64,IM B5 (IM V1,IM 3) POWER AND SIGNAL CONNECTORS G45: BUILT-IN HOLDING BRAKE K42: DRIVE END SHAFT EXTENSION VERSION "B"

AC FEED DR. MOTOR,UDC LINK 600V 33 NM, 100 K, 1200 RPM; AIR COOLING, TACHOGENERATOR A. SHAFT POSITION ENCODER, IP64, IM B5 (IM V1, IM V3) POWER AND SIGNAL CONNECTORS CONNECTOR OUTGOING DIRECTION, TRAVERSE RIGHT ADDITIONALLY PREPARED FOR ENCODER INSTALLATION; SHAFT WITH FEATHER KEY/KEYWAY, WITH HOLDING BRAKE;

AC FEED DRIVE MOTOR, DC LINK 600 V 18 NM, 100 K, 2000 RPM, AIR COOLING, TACHOGENERATOR A. SHAFT POSITION ENCODER, IP64, IM B5 (IM V1,IM V3) POWER AND SIGNAL CONNECTORS

AC FEED DRIVE MOTOR, DC LINK 600 V, 33 NM, 100 K, 4000 RPM, AIR COOLING,TACHOGEN. AND SHAFT POSITION ENCODER, IP64, IM B5 (IM V1,IM 3) POWER AND SIGNAL CONNECTORS K18: RADIAL SEAL ON THE DRIVE END

AC FEED DRIVE MOTOR, DC LINK 210 V 18 NM, 100 K, 2000 RPM, AIR COOLING, TACHOGENERATOR A. SHAFT POSITION ENCODER, IP64, IM B5 (IM V1,IM V3) F. TERMINAL BOX A. SIGNAL CONN. ADD. REPAIR SERVICE:AV000802, AV003240 G45: BUILT-IN HOLDING BRAKE G51: MOTOR PREPARED FOR MOUNTING OF THE ROD 426 PULSE ENCODER

AC FEED DRIVE MOTOR, DC LINK 600 V, 33 NM, 100 K, 2000 RPM, AIR COOLING,TACHOGEN. AND SHAFT POSITION ENCODER, IP64, IM B5 (IM V1,IM 3) POWER AND SIGNAL CONNECTORS G45: BUILT-IN HOLDING BRAKE K31: SECOND RATING PLATE K85 = TERMINAL BOX/CONNECTOR ROTATED BY 180 DEGR.

AC FEED DRIVE MOTOR, DC LINK 600 V, 33 NM, 100 K, 1200 RPM, AIR COOLING,TACHOGEN. A. SHAFT POSITION ENCODER,IP64, IM B5 (IM V1,IM 3) POWER AND SIGNAL CONNECTORS