Alarm System - secure@home

The indoor passive IR motion detector reveal the presence of intruders inside the controlled area, providing pet immunity. The is equipped with a passive IR sensor with Fresnel lens and by default it operates with a wide-ranging coverage (90° angle and 11 m distance)it is possible, through a different configuration, to make it operate with a long-distance coverage (10° angle...

The outdoor siren is a two-way self-powered device capable of emitting acoustic and light alarms. It is installed outdoor on a wall and is equipped with anti-opening, anti-removal, anti-perforation, anti-shock protection, as well as an anti-foaming patented system. Alarm sound type, duration, sound levels and LEDs, etc.can be configured and personalized while commissioning the system. Spare battery pack (Order code

The perimeter magnet reed contact detector controls doors, windows and detects their opening or closing through the internal reed contact and the external magnet. This device communicates bidirectionally with the central unit that supervises it at programmable intervals (every 15 minutes by default)it can be programmed in real time or delayed mode (with a programmable delay from 0 to 90...

This is the central units' dedicated battery pack. It is rechargeable, therefore it normally must not be replaced. Buy a spare battery only if its duration is significantly decreased, which could mean that the battery has reached its end-of-life.

It detects the presence of water. The minimum detectable level of the liquid is 1 millimeter, but it can be adjusted to higher levels.It is equipped with an anti-tamper (breakage or removal), self-diagnostics and control of battery charge device.The detector ic composed by the interface module and the flood detection probe. It features a bidirectional communication with the central unit...

This device repeats the signal between sensors and central units, extending the range to the radio frequency transmissions. The repeater features a bidirectional communication with the central unit that supervises it with a programmable supervision interval (typically every 15 minutes).It is possible to configure these parameters during the system commissioning. Up to 4 repeaters can be configured for each central...

The dual passive IR perimeter motion detector protects doors and/or windows using a tent-type cover on the opening and two infrared sensors. The device is also equipped with an extra input (it can be disabled, leaving only the active IR mode) where you can connect an external wired magnetic contact (with its anti-tampering). The detector provides the anti-masking feature (that...

The module is required for interfacing the smoke detectors (article no. 6800-0-2721) or heat detectors (article no. 6800-0-2723) to the central unit.The module is equipped with an integrated lithium battery - minimum battery life

This mounting bracket is an accessory used to mount the indoor IR motion detector in some specific conditions.

This compact-size device allows to control the building's external perimeter and it is particularly suitable for the protection of doors and windows. it has to be installed on the wall.The curtain-type detection area (5° detection angle) has an adjustable length from 2 to 5 meters.The device is internally fitted with two infrared detectors, one of which is adjustable. The alarm...

This is the outdoor sirens's dedicated battery pack.

The central unit is at the heart of the ABB-secure@home® system. It complies with EN 50131-1 grade 2 class I standard. It communicates with other system devices based on radio frequency with two-way protocol, by making the following features available to the user