Drive technology

Drive-based motion control system With expansion card PMCprimo C; Standard bus system: CANopen, PROFIBUS Software option: none;; Technical data at 3 x 400 V AC: Continuous output current: 6 A; Imax; (2 s) = 18 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 4.5 kVA; Integral brake resistor; CAN/CAN adapter included in delivery;

Drive-based motion control system With expansion card PMCprimo C; Standard bus system: CANopen, PROFIBUS; Software option: none;; Technical data at 3 x 400 V AC: Continuous output current: 3 A;; Imax (2 s)= 9 A; Imax (5 s)= 6 A; power consumption in S1 operation: 2.2; kVA; Integral brake resistor; CAN/CAN adapter included in delivery;

Drive-based motion control system with expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/Profibus; Software option: Dynamic curve calulation, IEC 61131-3 programming, EtherCat; Technical; data at 3 x 400 V AC: Continuous output current: 12 A, Imax (5 s)= 24 A;; power consumption in S1 operation: 9 kVA; Integral brake resistor and; mains filter; CAN/CAN adapter included in delivery.

Replacement connector for the controller card PMCprimo C at the; interface X40.

Drive-based motion control system With expansion card PMCprimo C2;; Standard bus system: CANopen/CANopen set; Software option: IEC 61131-3; programming, EtherCat; Technical data at 3 x 400 V AC: Continuous output; current: 3 A, Imax (2 s)= 9 A Imax (5 s)= 6 A; power consumption in S1; operation: 2.2 kVA; Integral brake resistor; CAN/CAN adapter included in; delivery.

Drive-based motion control system with expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/Profibus; Software option: none;; Technical data at 3 x 400 V AC: Continuous output current: 6 A; Imax; (2 s) = 18 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 4.5 kVA; Integral brake resistor; CAN/Profibus adapter included in delivery;

Expansion module for the energy storage to the Storage of the braking; energy from the Servo amplifiers.; Storage volume up to 1600 Ws

Card can be used in PMCprotego Connector X5 (e.g. for Encoder; emulation) Connector X3C (2 analogue inputs and 2 analogue outputs).

Energy storage for the storage of the brake energy from the Servo; amplifiers.; expands the storage volume up to 1600 Ws; PTC resistor 35W / 1750Ohm; Current peak 40 A

Card can be used in PMCprotego Connector X5 (e.g. for Encoder; emulation).

Card can be used in PMCtendo DD5 & PMCprotego.

Hybrid cable assembled on both sides: connectors con.23; round connector 9-pin speedtec; No. of wires and cross section (4x4,0+; (2x1,0)+(2xAWG22)); suitable for PMCprotego D.01-24 and the motors; PMCtendo SZ.4x...K bis SZ.73...K with HDSL encoder; Length in accordance; with customer specifications;