VEX-ELIMECS company logo
Catalog>ABB>Installation Materials>Flush Mounted Boxes
[siemens_summary]
[catalog_children]
[catalog_search_products]
Flush Mounted Boxes

Flush Mounted Boxes

Items 37 - 48 of 100 from ABB ⍾ Last modified Aug 29, 2025
▲ Accessories for Plastic Flush Mounted Boxes Fire Resistant Boxes Lamp Outlets Plastic Installation Boxes (for WA Inserts) Plastic Junction Boxes

Flush Mounted Boxes ⍾ Page 4

123456…9
Abb – 2TKA130015G1
Product detailsAdd to RFQ
2TKA130015G1 - Abb
Wall clamps offer a rapid means of attaching a mounting box to a 12-13 mm thick board wall. Wall clamp AS8.13 is available for 12 - 13 mm. The hole is made with an AT5 hole saw (Ø 74 mm), and the board clamps are placed on either side of the board. The box is pushed through the hole from...
Abb – 2TKA130005G1
Product detailsAdd to RFQ
2TKA130005G1 - Abb
The AS12 strain-relief inlet is used in conduitless flush mounting to fasten 5 x 2,5 mm² cables to the mounting boxes or junction boxes. The boxes are installed in the standard way in the board or other structure. (Conduitless flush mounting is acceptable in hollow structures under special circumstances). Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130027G1
Product detailsAdd to RFQ
2TKA130027G1 - Abb
The AU19 junction box has knock-outs for 8 inlets and 4 bottom inlets. The box can be fastened using side nailing or a PMR577 support. The box has four screw pillars, two for M4 screws and two for 3,5mm universal screws. The box is possible to install in cramped spaces. The depth, 47 mm, is the same as the depth...
Abb – 2TKA130026G1
Product detailsAdd to RFQ
2TKA130026G1 - Abb
The box AU17.2 has knock-outs for 11 inlets on the side, and 6 on the bottom. It can accommodate a device with a triple inlet. _x000D_If necessary, the box may be divided in two by using partition plate PMR345. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670
Abb – 2TKA130020G1
Product detailsAdd to RFQ
2TKA130020G1 - Abb
The AUS15.2 mounting box is used in buildings that have board walls. The holes are made with a hole saw (AT1, or equivalent). After the required conduit or cable inlets have been knocked out, the box is inserted in the hole. Turning the screws clockwise tightens the fastener against the board and secures the box in place. Conduits and cables...
Abb – 2TKA130029G1
Product detailsAdd to RFQ
2TKA130029G1 - Abb
The mounting box is designed for installation in all new buildings and in prefabricated building elements, and can be used with cast materials. It has a total of five knock-out inlets, two of which are on the same side. The bottom of the box provides access for two rear inlets. The boxes can be connected to each other with the...
Abb – 2TKA003967G1
Product detailsAdd to RFQ
2TKA003967G1 - Abb
The AU8 junction box is 73 mm high and has eight inlets for Ø 20 conduits. Two of the Ø 20 inlets are equipped with removable reducers for adjusting them to fit Ø 16 conduits. The box also has knock-outs for 4 side inlets and 4 bottom inlets. In wall installation the box can be attached with a AS13 support....
Abb – 2TKA130001G1
Product detailsAdd to RFQ
2TKA130001G1 - Abb
The AK13 is a smooth conversion cover designed for situations when flush mounting is converted to surface mounting. The cover has 8 knock-outs and is delivered with screws. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA002744G1
Product detailsAdd to RFQ
2TKA002744G1 - Abb
It is possible to raise the appliance up to 10 mm by using longer PLP5 screws. The screws fit all standard mounting boxes.
Abb – 2TKA002742G1
Product detailsAdd to RFQ
2TKA002742G1 - Abb
Appliances are attached directly to the box, using self-tapping PLP4 screws. The screws fit all standard mounting boxes.
Abb – 2TKA001746G1
Product detailsAdd to RFQ
2TKA001746G1 - Abb
The mounting box has a rotating ring for adjusting the screw holes for device installation in optimal angle and screw distance is c/c 67mm. The green adapter ring, delivered with the box, is used in single-board walls (12-13 mm). The ring is removed when the wall thickness is two boards (24-26 mm). There are five fixed inlets for 16 mm...
Abb – 2TKA001744G1
Product detailsAdd to RFQ
2TKA001744G1 - Abb
The mounting box has a rotating ring for adjusting the screw holes for device installation in optimal angle and screw distance is c/c 60mm. The green adapter ring, delivered with the box, is used in single-board walls (12-13 mm). The ring is removed when the wall thickness is two boards (24-26 mm). The box has two fixed inlets, one of...