Industrial automation

7ML57474CXXX1BA0-Z,Y01,Y17, DN50,PN63,Y01=240MM, XXX=DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=240MM

LC500,7ML55151AC142AA1Z; Y01=1300,Y02=100,Y15,C12, NACE CERTIFICATE VERSION: 1001 TO 2000 MM (39.41 TO 78.74") THREADED CONNECTION:2", ASME, 150 IB APPROVALS ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INLET 2XM20 X1.5 (IP68, ADAPTER) OPTIONS NONE THERMAL ISOLATOR OR REMOTE MOUNTED ELECTRONICS: WITHOUT ELECTRONIC OUTPUT:2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 ACCEPTANCE TEST CERTIFICATE B TO DIN 50049...

MSI, 7MH7122-2BK24-1A, CUSTOM PAINT SCALE CONSTRUCTION HAZARDOUS DUTY CSA / FM CLASS II, DIV. 1, GROUPS E, F, G AND CLASS III BELT WIDTH AND 'A' DIMENSION 48", 'A' = 57" (1448 MM) LOAD CELL CAPACITY 100 LB (45.4 KG) FABRICATION CUSTOM PAINT (COMPATIBLE WITH MWL WEIGHT CALIBRATION SYSTEM) SYSTEM SPECIFICATION STANDARD MSI AND MMI CUSTOM PAINT: DEGREE OF RUST...

7ML57474CXXX1BA0-Z,Y01,Y17, DN50,PN63,Y0,Y01=220MM,XXX= DN50PN63 EN1092-1, TYPE H SITRANS LVL200, RIGID EXTENSION ELECTRONICS: NAMUR SIGNAL APPROVAL: ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H. Y01=220MM THIS FLANGE IS RATED FOR 37.9 BAR MADP

WW100 INLET KIT, SPARE, FLAT SHEAR GATE INCLUDES ONE PIECE 304 STAINLESS STEEL INLET 304 SS SHEAR GATE, Y74= FLAT BOTTOM 304 SS GATE CLAMP MOUNTING HARDWARE

MSI, 7MH7122-2AJ24-1A, CUSTOM PAINT SCALE CONSTRUCTION HAZARDOUS DUTY CSA / FM CLASS II, DIV. 1, GROUPS E, F, G AND CLASS III BELT WIDTH AND 'A' DIMENSION 26", 'A' = 35" (889 MM) LOAD CELL CAPACITY 100 LB (45.4 KG) FABRICATION CUSTOM PAINT (COMPATIBLE WITH MWL WEIGHT CALIBRATION SYSTEM) SYSTEM SPECIFICATION STANDARD MSI AND MMI CUSTOM PAINT: DEGREE OF RUST...

RBSS, 7MH7134-2AB22, CUSTOM PAINT MODEL:60 PULSES PER REVOLUTION FABRICATION CUSTOM PAINT MILD STEEL MOUNTING OPTIONS WITH MOUNTING KIT APPROVALS CE, C-TICK, ATEX II 1 G, EEX IA IIC T6, ATEX II 1D EX IAD 20 T108 C, CSA/FM SWITCH ISOLATOR 230 V AC, REQUIRED WITH RBSS IS CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN / ZINC

7ML57474CXXX1BA0-Z,Y01,Y17 DN50,PN63,Y01=230MM XXX=DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=230MM

MILLTRONICS MSI BELT SCALE CSTM MSI,7MH71221AU511A, 55-65 IDL MNT. SCALE CONSTRUCTION: STANDARD DUTY BELT WIDTH AND 'A' DIMENSION: 36", 'A' = 45" (1143 MM) LOAD CELL CAPACITY 750 LB (340.2 KG). FABRICATION: POLYESTER PAINTED MILD STEEL SYSTEM SPECIFICATION: STANDARD MSI AND MMI NOTE: STANDARD IDLER MOUNTS OF THE 18"-54" MSI ARE REPLACED WITH STANDARD IDLER MOUNTS FROM THE 55"-65". THIS...

7ML13012EE123XX0-Z,XX= DN50PN40 FORM E, Y01=68CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL,HIGH TEMPERATURE /HIGH PRESSURE MATERIAL OF CONSTRUCTION: ENLARGED COAXIAL, 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=68CM O-RINGS:NONE PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 40 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD "-Z" TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT...

SPARE, E-40 FLOWGUIDE, 6", MS, PWDR PNT FLOWGUIDE SIZE: 6 INCH ASME FLANGE PATTERN FLOWGUIDE CONSTRUCTION: MILD STEEL, POLYESTER PAINTED NOTE: THE CEG CANNOT ENSURE THE EXISTING EQUIPMENT WHEN COMBINED WITH THE REPLACEMENT FLOWGUIDE, WILL WORK FOR THE INTENDED APPLICATION. PLEASE CONTACT THE ESG TO VERIFY THE APPLICATION.

7ML54231XX313CG1,XX=DN50PN16 TYPE E ANTENNA MATERIAL PTFE - USES ANTENNA ADAPTER PROCESS CONNECTION G 2" ASSEMBLED TO DN50PN16 1092-1 TYPE E FLANGE ANTENNA EXTENSIONS OR 100 MM (4") EXTENSION, 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET FKM O-RING ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI COMMUNICATION/OUTPUT 4-20MA HART,START-UP AT