Industrial communication technology

Partition plate - FB-MODULAR-PP - 2316061; The FB-MODULAR-PP is a partition plate used between two fieldbus modular device couplers and provides the required 50 mm spacing between an intrinsically safe electrical connection and a non-intrinsically safe electrical connection. The device couplers are 17.5 mm wide, but when adding a partition plate a 22.5 mm TBUS connector is required.

Device coupler - FB-2SP/E - 2316052; Device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for two spurs connected to fieldbus end devices

Device coupler - FB-2SP - 2316051; Device coupler for Foundation Fieldbus and PROFIBUS PA expansions with terminal connections for 2 spurs connected to fieldbus end devices

Trunk module - FB-ET - 2316048; Trunk module for Foundation Fieldbus and PROFIBUS PA expansions with terminator

Termination resistor - FIELDBUS TERMINATOR - 2316034; The fieldbus terminator plug is pre-installed in the trunk out connection of device couplers.

Trunk module - FB-ET/E - 2316050; Trunk module for Foundation Fieldbus and PROFIBUS PA modular device couplers with terminator

FO converters - PSI-MOS-DNET/FO 850 E - 2313999; Fiber optic converter with integrated optical diagnostics, for DeviceNet™, CAN, CANopen® up to 1000 kbps, termination device, interfaces: 1 x CAN, 1 x Alarm, 1 x FO (B-FOC), 850 nm, for PCF/fiberglass (multi-mode)

FO connectors - PSM-SET-SC-DUPLEX/2-HCS/PN - 2313779; SC duplex connector set for standard PROFINET PCF fiber cables with 2.2 mm diameter of the individual elements. Consisting of 2 duplex quick mounting connectors with bend protection for self-assembly.

Network isolator - FL ISOLATOR 100-RJ/RJ - 2313931; Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps. Possible to connect two RJ45 plugs.

Network isolator - FL ISOLATOR 1000-RJ/RJ - 2313915; Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 1 Gbps. Possible to connect two RJ45 plugs.

Network isolator - FL ISOLATOR 100-RJ/SC - 2313928; Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps. Connection using RJ45 and COMBICON plug-in screw terminal block.

FO connectors - PSM-SET-B-FOC/4-HCS/PN - 2313782; B-FOC (ST) connector set for standard PROFINET PCF fiber cables with 2.2 mm diameter of the individual elements. Consisting of 4 quick mounting connectors with bend protection for self-assembly.