Intrusion Alarm Systems

This lithium batteries are the ones used by all the ABB-secure@home safety and security sensors.

The device signals the opening of overhead or rolling doors. It must be necessarily connected to a perimeter magnet reed contact detector (SMC-W1.1x) or to a dual passive IR perimeter motion detector (SMD-W2.1x)for this purpose it is equipped with a 1.2 meter connection cable.It is made of aluminum with high resistance to the transit of heavy vehicles.The minimum fixing distance...

The outdoor dual passive IR motion detector is suitable to control the building's external areas. It has to be installed on wall or pole.The device integrates two infrared detectors

This device, specific to be installed on the wall at a height of 2.5 - 3 m, allows to control building's external areas. Through the two IR detectors, the device indicates the presence of intruders avoiding false alarm alerts. The detector provides an anti-masking function (that can be disabled). This device communicates bidirectionally with the central unit that supervises it...

The central unit is at the heart of the ABB-secure@home® system. It complies with EN 50131-1 grade 2 class I standard. It communicates with other system devices based on radio frequency with two-way protocol, by making the following features available to the user

This device detects a possible shock occurred on a door, window or the surface on which it is installed. Equipped with a 2-meter connection cable, it must be necessarily connected to a perimeter magnet reed contact detector (SMC-W1.1x). Assembly

The perimeter magnet reed contact detector controls doors, windows and detects their opening or closing through the internal reed contact and the external magnet. This device communicates bidirectionally with the central unit that supervises it at programmable intervals (every 15 minutes by default)it can be programmed in real time or delayed mode (with a programmable delay from 0 to 90...

The indoor passive IR motion detector reveal the presence of intruders inside the controlled area, providing pet immunity. The is equipped with a passive IR sensor with Fresnel lens and by default it operates with a wide-ranging coverage (90° angle and 11 m distance)it is possible, through a different configuration, to make it operate with a long-distance coverage (10° angle...

The outdoor siren is a two-way self-powered device capable of emitting acoustic and light alarms. It is installed outdoor on a wall and is equipped with anti-opening, anti-removal, anti-perforation, anti-shock protection, as well as an anti-foaming patented system. Alarm sound type, duration, sound levels and LEDs, etc.can be configured and personalized while commissioning the system. Spare battery pack (Order code

The perimeter magnet reed contact detector controls doors, windows and detects their opening or closing through the internal reed contact and the external magnet. This device communicates bidirectionally with the central unit that supervises it at programmable intervals (every 15 minutes by default)it can be programmed in real time or delayed mode (with a programmable delay from 0 to 90...

It detects the presence of water. The minimum detectable level of the liquid is 1 millimeter, but it can be adjusted to higher levels.It is equipped with an anti-tamper (breakage or removal), self-diagnostics and control of battery charge device.The detector ic composed by the interface module and the flood detection probe. It features a bidirectional communication with the central unit...

This device repeats the signal between sensors and central units, extending the range to the radio frequency transmissions. The repeater features a bidirectional communication with the central unit that supervises it with a programmable supervision interval (typically every 15 minutes).It is possible to configure these parameters during the system commissioning. Up to 4 repeaters can be configured for each central...