Sensors systems

Internal NCS module for SIPART PS2 for contactless position measurement, for installation in the positioner enclosure with explosion protection

Alarm module . plug-in module for binary signals for SIPART PS2 electropneumatic positioner, simple to retrofit, 2 limit outputs min. or max., 1 fault output, 1 binary input, with explosion protection: eexib

Cable socket M12 stainless steel (D-coding), for cable mounting (0.25 - 0.5 mm²). The cable socket can be pluged into the M12 device plug of the SIPART PS2.

SIPART PS2 overvoltage protection up to 6kV for PA / FF, M20x1.5

Manometer block stainless steel 316  ¼?18 NPT, double-acting with SST manometer IP54 (MPa, bar, psi) for SIPART PS2

Gauge made of steel, Aluminium block, double-action G1/4, scaled in MPa, bar and psi

Position Transmitter in an aluminum enclosure with Non Contacting Sensor (NCS) and Mechanic Limit Switches (MLS), without electronics, without pneumatic block, for separate mounting of position detection at the actuator. Review technical data for explosion protection (ATEX / IECEx / FM / CSA / not Ex d). SIPART PS2 externally mounted in protected area. Prerequisite: SIPART PS2 with integrated Analog...

Analog Input Module (AIM) - Ex

SIPART PS2 overvoltage protection up to 6kV for 4-wire, M20x1.5

Two terminal blocks made of stainless steel 316. For replacement of the aluminum terminal blocks in the 6DR4004-8V, -8VK and -8VL mounting kits for NAMUR linear actuators.

Gauge made of steel, Aluminium block, double-action, 1/4-18 NPT, scaled in MPa, bar and psi

Manometer block stainless steel 316 G¼, double-acting with SST manometer IP54 (MPa, bar, psi) for SIPART PS2