Sensors systems

7ML57474CXXX1BA0-Z,Y01,Y17 DN50,PN63,Y01=230MM XXX=DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=230MM

SPARE, E-40 FLOWGUIDE, 6", MS, PWDR PNT FLOWGUIDE SIZE: 6 INCH ASME FLANGE PATTERN FLOWGUIDE CONSTRUCTION: MILD STEEL, POLYESTER PAINTED NOTE: THE CEG CANNOT ENSURE THE EXISTING EQUIPMENT WHEN COMBINED WITH THE REPLACEMENT FLOWGUIDE, WILL WORK FOR THE INTENDED APPLICATION. PLEASE CONTACT THE ESG TO VERIFY THE APPLICATION.

7ML13012EE123XX0-Z,XX= DN50PN40 FORM E, Y01=68CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL,HIGH TEMPERATURE /HIGH PRESSURE MATERIAL OF CONSTRUCTION: ENLARGED COAXIAL, 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=68CM O-RINGS:NONE PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 40 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD "-Z" TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT...

MILLTRONICS MSI BELT SCALE CSTM MSI,7MH71221AU511A, 55-65 IDL MNT. SCALE CONSTRUCTION: STANDARD DUTY BELT WIDTH AND 'A' DIMENSION: 36", 'A' = 45" (1143 MM) LOAD CELL CAPACITY 750 LB (340.2 KG). FABRICATION: POLYESTER PAINTED MILD STEEL SYSTEM SPECIFICATION: STANDARD MSI AND MMI NOTE: STANDARD IDLER MOUNTS OF THE 18"-54" MSI ARE REPLACED WITH STANDARD IDLER MOUNTS FROM THE 55"-65". THIS...

7ML54231XX313CG1,XX=DN50PN16 TYPE E ANTENNA MATERIAL PTFE - USES ANTENNA ADAPTER PROCESS CONNECTION G 2" ASSEMBLED TO DN50PN16 1092-1 TYPE E FLANGE ANTENNA EXTENSIONS OR 100 MM (4") EXTENSION, 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET FKM O-RING ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI COMMUNICATION/OUTPUT 4-20MA HART,START-UP AT

BELT,CNVR,SBR,30X161,150PIW,2P, B-SECTION

7ML56506EG000DBX-Y02-500, Y01=850MM PROCESS CONNECTION DN 50, PN 16 LENGTH: Y01=850MM THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE: ENCLOSURE ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH Y01=500MM TOTAL INSERTION LENGTH Y01=850MM

7ML5732-1DE38-1DA0-Z, Y01=2000MM, WITH PFA COATING POWER SUPPLY 19 TO 230 V AC, 19 TO 55 V DC, ONE RELAY OUTPUT (SPDT) PROCESS TEMPERATURE SEPARATED ENCLOSURE - CABLE LENGTH 4.0 M (13.12 FT) MAX. TEMP PROCESS +180 C PROCESS CONNECTION DN100 PN 6, EN1092-1 (1.4541/321) EXTENSION LENGTH Y02=2000MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS STEEL 316TI (1.4571) APPROVALS CE, C-TICK

7ML13011AA211XX0-Z,XX=DN50PN16, FORM E, Y01=154CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=154CM O-RINGS:VITON PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD "-Z" TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM (240.2")

7MH75601XA01,X=7M SENSOR: STANDARD TEMPERATURE RANGE (-20 C TO +80 C) CABLE LENGTH: 7 METERS (22.97 FT) SENSOR MOUNTING: NONE APPROVALS: CE

7ML13011AA213XX0-Z,XX=DN50PN16, FORM E, Y01=118CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=118CM O-RINGS:KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD "-Z" TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION MAX. 610 CM (240.2")

SITRANS LG200 COAXIAL PROBES MLFB: 7ML1301-1AA21-3XX0-Z, XX=DN50PN16 FORM E, Y01=168CM MODEL COAXIAL MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNPROBE INSERTION LENGTH Y01=168CM O-RINGS KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE) DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANG FURTHER DESIGNS PLEASE ADD "-Z" TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN...