Temperature measurement

SITRANS I200 single channel output isolator for rail mounting for HART signals 0/4 … 20 mA. For intrinsic safe operation of positioners e.g. SIPART PS2, I/p converters and indicators. Approved up to SIL 2 (IEC/EN 61508), width 12.5 mm.

SITRANS I EXTENSION SET PAC-BUS WITH 5 SINGLE ELEMENTS

SITRANS I100 ISOLATING POWER SUPPLY HART, RAIL MOUNTING FOR 2/3-WIRE TRANSMITTER AND MA-SOURCES INTRINSICALLY SAFE INPUT 0/4-20MA; POWERSUPPLY: DC 24V

SITRANS I BASIC SET PAC-BUS WITH 5 SINGLE ELEMENTS AND TERMINAL SET (BEGIN AND END)

SITRANS I200 OUTPUT ISOLATER HART; RAIL MOUNTING; INPUT AND OUTPUT 0/4-20 MA; INTRINSICALLY SAFE OUTPUT; POWER SUPPLY DC 24V

SITRANS I100 isolating power supply for 2-wire transmitters, 4-wire transmitters with intrinsically safe input (mA sources) and Analog Output Module (AOM) for SIPART PS2. Single channel design, output 0/4 … 20 mA, intrinsically safe Ex i, approved up to SIL 2 (IEC/EN 61508), width 12.5 mm, rail mounting.

SITRANS I ISOLATING POWER SUPPLY / ISOLATING AMPLIFIER FOR RAIL MOUNTING, FOR POWER SUPPLY OF 2-WIRE TRANSMITTERS AND GALVANIC ISOLATION AND CONVERSION OF CURRENT/VOLTAGE SIGNALS. NEEDED ADJUSTMENT FOR INPUT/OUTPUT SIGNAL VIA SWITCH AT THE FRONT.POWERSUPPLY:UC 24V

Temperature transmitter SITRANS TH400 for installation in connection head, Fieldbus Foundation, with electicial isolation, order manual separately . Explosion protection: Without/ Zone 2/Div 2 to ATEX/FM/CSA . . Pt100 (IEC), 3-wire Specify measuring range in plain text Measuring point number (TAG) (max. 8 characters)

SITRANS TW universal transmitter for rail mounting in four-wire system without explosion protection; Powersupply AC/DC 24 V, Output signal: 0/4 to 20mA, without relay, Input for temperature sensors, resistance-based sensors and mV sources, measuring range -120..1000 mV; set operating data according to requirements (add additional data);

Temperature transmitter SITRANS TH300 For installation in the connection head, Type B (DIN 43729), Two-wire system 4 ... 20 mA, programmable, communication-capable acc. to HART, with electrical isolation Without explosion protection (description not available) (description not available) Country of origin France

SITRANS TW universal transmitter for rail mounting in four-wire system without explosion protection; Powersupply AC/DC 230 V, Output signal: 0/4 to 20mA, without relay, Input for temperature sensors, resistance-based sensors and mV sources, measuring range -120..1000 mV;

Temperature transmitter SITRANS TH300 For installation in the connection head, Type B (DIN 43729), Two-wire system 4 ... 20 mA, programmable, communication-capable acc. to HART, with electrical isolation Without explosion protection . . Country of origin France Pt100 (IEC), 2-wire, RL=0 Ohm Specify measuring range in plain text