Abb – 2CDG110104R0011

4 inputs isolated from each other of 230 V~, status LED per input Installation and contacting is effected exclusively in the room controller

Contact interrogation for 4 floating contacts The device provides the interrogation voltage (12 V) itself. Installation and contacting is effected exclusively in the room controller

2gang blind actuator module for controlling 2 independent blind groups Installation and contacting is effected exclusively in the room controller

For controlling blind or awning motors. For connecting the thermoelectric actuating drives 6164/10 101. 1 electronic output (noiseless) The bus can be connected via enclosed terminal block.

2gang switch actuator module for switching two consumers Installation and contacting is effected exclusively in the room controller

Enables the switching and dimming of one group of luminaires via a 1...10 V control voltage. The device can be used for constant lighting control in connection with a Light Sensor LF/U 2.1.

Switches up to 16 A with two floating relay contacts. The feeding voltage is independent from the Room Controller Basis Device. It must thus be applied directly to the module.

Accommodates up to 8 plug-in modules. It controls their function and communicates as one bus device via the ABB i-bus®. Any module type can be plugged into each module slot. Manual operation for functional tests.

Module for plugging into the Room Controller Basis Device. It enables the switching and dimming of two groups of luminaires in connection with electronic ballasts via a 1-10 V control voltage. High switching capacity.