Abb – 2CPX062822R9999

Cover bracket, 52.5 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on, with 35 x 15 mm top-hat rails, only this cover bracket must be used; packaging unit — 40 pieces.

Cover bracket, 88 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on; to be used when installing devices at greater depths or with busbar systems; packaging unit — 4 pieces.

Cover bracket, 52.5 mm high, for mounting (inserting, turning) on EDF and WR profile rails, as well as for latching a partition wall on, with 35 x 15 mm top-hat rails, only this cover bracket must be used; packaging unit — 12 pieces.

Cover bracket, 45 mm high, for mounting (inserting, turning) on EDF profile rails, as well as for latching a bulkhead on, with 35 x 7.5 mm top-hat rails, only this cover bracket must be used; packaging unit — 40 pieces.

Support insulator with wrench flat, diameter x length

Support insulator with wrench flat, diameter x length

Washer, 5 mm, DIN 125, zinc-plated, for M5 screws.

Lens-tapping screw with a hexalobular socket and slit, Torx screw T25 M 4.8 x 11.5 mm.

Device carrier/connector, for connecting EDF and WR mounting frames.

Cage nuts M8, for mounting cross beam, for fastening separators, for mounting without holes, suitable for ZH235, ZH238, ZW159 and ZW160

Mounting bracket for the ZK90P2 insulator, in conjunction with the lowered assembly of the ZX371 top-hat rail for row clamps.

Spacer for meter support plates, field width 1, suitable for M(B)Z160, M(B)Z161.