Abb – GHQ7132443R0004

For setting/unsetting with the Evaluation Module L240/BS. The unit is actuated by inserting the electronic SafeKey chipkey. The SafeKey Wall Reader WEL is equipped with the key reader and an acknowledgement buzzer.

Electronic Chipkey for SafeKey-Units. Up to 250 Keys may be handled by GM/A 8.1 KNX Security Panael and L240 Alarm System. It is an electronic carrier medium for setting / unsetting via a SafeKey unit. A SafeKey Chipkey can be authorized for any number of different SafeKey systems with different levels of authorization.

The reed contact for rolling doors is mounted mainly on rolling, sliding and tilting doors. The contact housing is mounted on the ground (a flat support surface is required). Only screws made of anti-magnetic material are allowed to be used for mounting. Due to the weatherproof and mechanically stable design of the contact housing, the circuit is largely protected against damage when rubber-tired vehicles drive over it. The 4-wire cable is protected by a plastic-coated metal hose.

For installation in the strike plate. Used for lock monitoring on doors. Water-tight IP 68, with 2.5 m connection cable LIYY 3 x 0.14 mm².

Used together with an intrusion alarm system to implement the inevitability condition. The motorized bolt lock additionally locks the door to the set area, preventing unintentional opening of the door when the intrusion alarm system is set. The ESPE/M Mini Bolt Lock is connected to the L240/BS Evaluation module for the L240 Intrusion Alarm Panel or GM/A 8.1 KNX Security Panel.

Operates according to the proven detection principle of the EIM detector (infra-red technology and electromagnetic field) over 360°. The range of the infrared component can be adapted via the mounting height while the range of the electromagnetic field can be adjusted separately using a jumper. The detector is fitted with a walk test LED. Colour

The Gas Detector is designed to monitor residential and commercial rooms. It can be used as a standalone device, or connected to the inputs of ABB intrusion and fire alarm control panels or ABB i‑bus® KNX devices. It requires an external power supply. The detector is also highly sensitive to combustible gases. It is suitable for monitoring combustible gases such as propane, methane and butane, as well as acetylene, city gas and naturalgas.