Ifm – LX0024

Electronic level and temperature sensor; Medium temperature [°C] : 0...35; (with climatic tube E43102 35...55 °C); Medium temperature [°C] : 0...70; Medium temperature short time [°C] : 0...90; (< 1 h); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 3; Measuring principle : capacitive; Total number of outputs : 4; Output signal : switching signal; IO-Link; Electrical design : PNP/NPN; Number of digital outputs : 4; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 200; Short-circuit protection : yes; Type of short-circuit protection : thermal, pulsed; Overload protection : yes; Factory setting : 2 switching outputs level (OUT1, OUT2); 2 switching outputs temperature (OUT3, OUT4); mineral oils; Probe length L [mm] : 728; Active range A [mm] : 585; Inactive range I1 / I2 [mm] : 104 / 39; Set point SP [mm] : 60...590; Reset point rP [mm] : 50...580; In steps of [mm] : 10; Reference point OP [mm] : 200 - 240 - 280 - 310 - 350 - 390 - 420 - 460 - 500 - 530 - 570 - 610 - OFF; Hysteresis, OP [mm] : 4; Switch point accuracy [K] : ± 1,5; Resolution [K] : 0.5; Dynamic response T09 [s] : 90; Measuring error [% of the final value] : ± 5; Repeatability : ± 2; Resolution [mm] : 10; Parameter setting options : hysteresis / window; normally open / normally closed; SP/rP position; OP position; adjustment OP; medium selection; offset setting; Display unit; process value assignment; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 4; Process data binary : 4; Min. process cycle time [ms] : 4.5; Supported DeviceIDs : Type of operation: DeviceID | Default: 20; Ambient temperature [°C] : 0...60; Storage temperature [°C] : -25...80; Materials : stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV; Materials (wetted parts) : PP

Continuous level sensor (guided wave radar)

Continuous level sensor (guided wave radar); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Measuring error [mm] : ± 7; Offset error [mm] : 5; Resolution [mm] : 1; Zero signal (current) [mA] : 4.0; Full signal (current) [mA] : 20; Temperature drift per 10 K : ± 0.2 %; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 478; Ambient temperature [°C] : -40...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PEI; PFA; PBT; FKM; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; EPDM; Process connection : G 1 Aseptoflex Vario; Surface characteristics Ra/Rz of the wetted parts : < 0.8

Continuous level sensor (guided wave radar); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Repeatability [mm] : ± 5; Measuring error [mm] : ± 7; Offset error [mm] : 5; Resolution [mm] : 1; Zero signal (voltage) [V] : 0; Zero signal (current) [mA] : 4.0; Full signal (voltage) [V] : 10; Full signal (current) [mA] : 20; Temperature drift per 10 K : ± 0.2; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9 CDV; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 1; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 344; Ambient temperature [°C] : -25...60; Storage temperature [°C] : -40...80; Materials : stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; PBT; PC; PEI; TPE-V; Materials (wetted parts) : stainless steel (1.4305 / 303); probe connection: stainless steel (1.4435 / 316L); PTFE; FKM; Sealing: NBR reinforced fibre; Process connection : G 3/4 external thread

Continuous level sensor (guided wave radar); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 5; Measuring error [mm] : ± 7; Offset error [mm] : 5; Resolution [mm] : 1; Zero signal (current) [mA] : 4.0; Full signal (current) [mA] : 20; Temperature drift per 10 K : ± 0.2 %; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 643; Ambient temperature [°C] : -40...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PEI; PFA; PBT; FKM; Materials (wetted parts) : stainless steel (1.4404 / 316L); PEEK; EPDM; Process connection : G 1 Aseptoflex Vario; Surface characteristics Ra/Rz of the wetted parts : < 0.8

Sensor for point level detection; Medium temperature [°C] : -25...100; (applications subject to the German Federal Water Act 0...100 °C); Medium temperature short time [°C] : -25...150; (1 h; applications subject to the German Federal Water Act : 0...100 °C); Medium temperature [°C] : -25...85; (applications subject to the German Federal Water Act : 0...85 °C); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Measuring principle : capacitive; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP; Number of digital outputs : 2; Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : hydrous media; Response time [s] : < 0.5; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 449; Ambient temperature [°C] : -20...85; Note on ambient temperature : Medium temperature 100...150 °C | -40...60 °C; Storage temperature [°C] : -40...85; Materials : stainless steel (1.4404 / 316L); PEEK; PEI; FKM; Materials (wetted parts) : PEEK; surface characteristics: Ra < 0,8 / Rz 4; Process connection : G 1 external thread

Level sensor for limit detection with overspill protection (German Federal Water Act); Medium temperature [°C] : -25...100; (applications subject to the German Federal Water Act 0...100 °C); Medium temperature short time [°C] : -25...150; (1 h; applications subject to the German Federal Water Act : 0...100 °C); Medium temperature [°C] : -25...85; (applications subject to the German Federal Water Act : 0...85 °C); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Measuring principle : capacitive; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP; Number of digital outputs : 2; Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : hydrous media; Response time [s] : < 0.5; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 449; Ambient temperature [°C] : -20...85; Note on ambient temperature : Medium temperature 100...150 °C | -40...60 °C; Storage temperature [°C] : -40...85; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; PEI; FKM; Materials (wetted parts) : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; surface characteristics: Ra < 0,8 / Rz 4; FKM; Process connection : threaded connection G 1/2 sealing cone

Sensor for point level detection; Medium temperature [°C] : -20...100; Medium temperature short time [°C] : -20...150; (1 h); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Measuring principle : capacitive; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : hydrous media; Response time [s] : < 0.5; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 370; Ambient temperature [°C] : -20...85; Note on ambient temperature : Medium temperature: < 100 °C | -20...60 °C | Medium temperature: < 150 °C; Storage temperature [°C] : -40...85; Materials : stainless steel (1.4404 / 316L); PEEK; PEI; FKM; Materials (wetted parts) : PEEK; surface characteristics: Ra < 0,8 / Rz 4; Process connection : G 1 external thread

Sensor for point level detection; Medium temperature [°C] : -40...100; Medium temperature short time [°C] : -40...150; (1 h); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Measuring principle : capacitive; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : oils; oil-based media; Response time [s] : < 0.5; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 305; Ambient temperature [°C] : -40...85; Note on ambient temperature : Medium temperature: < 100 °C | -40...60 °C | Medium temperature: < 150 °C; Storage temperature [°C] : -40...85; Materials : stainless steel (1.4404 / 316L); PEEK; PEI; FKM; Materials (wetted parts) : PEEK; surface characteristics: Ra < 0,8 / Rz 4; Process connection : threaded connection G 1/2 sealing cone

Sensor for point level detection; Medium temperature [°C] : -25...100; (applications subject to the German Federal Water Act 0...100 °C); Medium temperature short time [°C] : -25...150; (1 h; applications subject to the German Federal Water Act : 0...100 °C); Medium temperature [°C] : -25...85; (applications subject to the German Federal Water Act : 0...85 °C); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Measuring principle : capacitive; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP; Number of digital outputs : 2; Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : hydrous media; Response time [s] : < 0.5; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 449; Ambient temperature [°C] : -20...85; Note on ambient temperature : Medium temperature 100...150 °C | -40...60 °C; Storage temperature [°C] : -40...85; Materials : stainless steel (1.4404 / 316L); PEEK; PEI; FKM; Materials (wetted parts) : PEEK; surface characteristics: Ra < 0,8 / Rz 4; Process connection : G 3/4 external thread

Sensor for point level detection; Medium temperature [°C] : -20...100; Medium temperature short time [°C] : -20...150; (1 h); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Measuring principle : capacitive; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : hydrous media; Response time [s] : < 0.5; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 370; Ambient temperature [°C] : -20...85; Note on ambient temperature : Medium temperature: < 100 °C | -20...60 °C | Medium temperature: < 150 °C; Storage temperature [°C] : -40...85; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; PEI; FKM; Materials (wetted parts) : stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; surface characteristics: Ra < 0,8 / Rz 4; FKM; Process connection : threaded connection G 1/2 sealing cone

Sensor for point level detection; Medium temperature [°C] : -20...100; Medium temperature short time [°C] : -20...150; (1 h); Operating voltage [V] : 18...30 DC; Protection class : III; Reverse polarity protection : yes; Measuring principle : capacitive; Total number of outputs : 2; Output signal : switching signal; IO-Link; Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Factory setting : hydrous media; Response time [s] : < 0.5; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 370; Ambient temperature [°C] : -20...85; Note on ambient temperature : Medium temperature: < 100 °C | -20...60 °C | Medium temperature: < 150 °C; Storage temperature [°C] : -40...85; Materials : stainless steel (1.4404 / 316L); PEEK; PEI; FKM; Materials (wetted parts) : PEEK; surface characteristics: Ra < 0,8 / Rz 4; Process connection : G 3/4 external thread