Ifm – MK5111

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC/DC; (External protective circuit for inductive load (valve, contactor, etc.) necessary.; "supply class 2" according to UL); Protection class : III; Reverse polarity protection : no; Electrical design : PNP; Output function : normally open; Max. voltage drop switching output DC [V] : 1; Max. voltage drop switching output AC [V] : 1; Permanent current rating of switching output AC [mA] : 350; Permanent current rating of switching output DC [mA] : 500; Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : < 0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,75 A; fast acting; DC operation; ≤ 0,6 A; fast acting; AC operation; Items supplied : rubber placeholder: 1 | Cable clip: 1; Cable: 0.3 m, PUR; Connector: 1 x M12; Locking: knurled nut, rotatable

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC/DC; (External protective circuit for inductive load (valve, contactor, etc.) necessary.; "supply class 2" to cULus); Protection class : III; Reverse polarity protection : no; Electrical design : PNP; Output function : normally open; Max. voltage drop switching output DC [V] : 1; Max. voltage drop switching output AC [V] : 1; Permanent current rating of switching output AC [mA] : 350; Permanent current rating of switching output DC [mA] : 500; Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : < 0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : PA; fastening clamp: stainless steel; Items supplied : rubber placeholder: 1 | Cable clip: 1

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC/DC; (External protective circuit for inductive load (valve, contactor, etc.) necessary.; "supply class 2" according to UL); Protection class : III; Reverse polarity protection : no; Electrical design : PNP; Output function : normally open; Max. voltage drop switching output DC [V] : 1; Max. voltage drop switching output AC [V] : 1; Permanent current rating of switching output AC [mA] : 350; Permanent current rating of switching output DC [mA] : 500; Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : < 0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,75 A; fast acting; DC operation; ≤ 0,6 A; fast acting; AC operation; Items supplied : rubber placeholder: 1 | Cable clip: 1; Cable: 0.3 m, PUR; Connector: 1 x M8; Locking: knurled nut, rotatable; vibration protection

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC/DC; (External protective circuit for inductive load (valve, contactor, etc.) necessary.; "supply class 2" to cULus); Protection class : III; Reverse polarity protection : no; Electrical design : PNP; Output function : normally open; Max. voltage drop switching output DC [V] : 1; Max. voltage drop switching output AC [V] : 1; Permanent current rating of switching output AC [mA] : 350; Permanent current rating of switching output DC [mA] : 500; Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : < 0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : PA; fastening clamp: stainless steel; Items supplied : rubber placeholder: 1 | Cable clip: 1

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC / 5...60 DC; (cULus supply class 2: 5...30 AC / 5...60 DC); Protection class : III; Reverse polarity protection : yes; Electrical design : PNP/NPN; Output function : normally open; Max. voltage drop switching output DC [V] : 5; Max. voltage drop switching output AC [V] : 5; Permanent current rating of switching output AC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Permanent current rating of switching output DC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit protection : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : < 0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : non-flush mountable; Type of mounting : fastening clamp with combined slot / hexagon socket, width across flats 1.5; Cylinder type : T-slot cylinders; Materials : housing: PA; fastening clamp: stainless steel / brass; Switching cycles when connected to PLC [Mio] : < 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,175 A; fast acting; Items supplied : rubber placeholder: 1; Connector: 1 x M8; Locking: snap-fit

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC / 5...60 DC; (cULus supply class 2: 5...30 AC / 5...60 DC); Protection class : III; Reverse polarity protection : yes; Electrical design : PNP; Output function : normally open; Max. voltage drop switching output DC [V] : 2.5; Max. voltage drop switching output AC [V] : 2.5; Permanent current rating of switching output AC [mA] : 350; Permanent current rating of switching output DC [mA] : 500; Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : < 0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : non-flush mountable; Type of mounting : fixing element with combined head slot / hexagon socket AF 1.5; Cylinder type : T-slot cylinders; Materials : housing: PA; Fixing element: stainless steel / brass; Switching cycles when connected to PLC [Mio] : < 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,175 A; fast acting; Items supplied : rubber placeholder: 1; Connector: 1 x M8; Locking: snap-fit

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC/DC; (External protective circuit for inductive load (valve, contactor, etc.) necessary.; "supply class 2" according to UL); Protection class : III; Reverse polarity protection : no; Electrical design : PNP; Output function : normally open; Max. voltage drop switching output DC [V] : 1; Max. voltage drop switching output AC [V] : 1; Permanent current rating of switching output AC [mA] : 350; Permanent current rating of switching output DC [mA] : 500; Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : < 0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,75 A; fast acting; DC operation; ≤ 0,6 A; fast acting; AC operation; Items supplied : rubber placeholder: 1 | Cable clip: 1; Cable: 0.3 m, PUR; Connector: 1 x M8; Locking: snap-fit

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC / 5...60 DC; (UL supply class 2: 5...60 DC / 5...30 AC); Protection class : III; Reverse polarity protection : yes; Electrical design : PNP/NPN; Output function : normally open; Max. voltage drop switching output DC [V] : 5; Max. voltage drop switching output AC [V] : 5; Permanent current rating of switching output AC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Permanent current rating of switching output DC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : -0.2...0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : housing: PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : < 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,175 A; fast acting; Items supplied : rubber placeholder: 1 | Cable clip: 1; Cable: 0.3 m, PUR; Connector: 1 x M12; Locking: knurled nut, rotatable

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...120 AC/DC; (UL supply class 2: 5...60 DC / 5...30 AC); Protection class : II; Reverse polarity protection : yes; Electrical design : PNP/NPN; Output function : normally open; Max. voltage drop switching output DC [V] : 5; Max. voltage drop switching output AC [V] : 5; Permanent current rating of switching output AC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Permanent current rating of switching output DC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : -0.2...0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : housing: PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : < 40; Items supplied : rubber placeholder: 1 | Cable clip: 1

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...120 AC/DC; (UL supply class 2: 5...60 DC / 5...30 AC); Protection class : II; Reverse polarity protection : yes; Electrical design : PNP/NPN; Output function : normally open; Max. voltage drop switching output DC [V] : 5; Max. voltage drop switching output AC [V] : 5; Permanent current rating of switching output AC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Permanent current rating of switching output DC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : -0.2...0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : housing: PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : < 40; Items supplied : rubber placeholder: 1 | Cable clip: 1

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC / 5...60 DC; (UL supply class 2: 5...60 DC / 5...30 AC); Protection class : III; Reverse polarity protection : yes; Electrical design : PNP/NPN; Output function : normally open; Max. voltage drop switching output DC [V] : 5; Max. voltage drop switching output AC [V] : 5; Permanent current rating of switching output AC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Permanent current rating of switching output DC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : -0.2...0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : housing: PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : < 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,175 A; fast acting; Items supplied : rubber placeholder: 1 | Cable clip: 1; Cable: 0.3 m, PUR; Connector: 1 x M8; Locking: knurled nut, rotatable

T-slot cylinder sensor with reed contact; Operating voltage [V] : 5...50 AC / 5...60 DC; (UL supply class 2: 5...60 DC / 5...30 AC); Protection class : III; Reverse polarity protection : yes; Electrical design : PNP/NPN; Output function : normally open; Max. voltage drop switching output DC [V] : 5; Max. voltage drop switching output AC [V] : 5; Permanent current rating of switching output AC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Permanent current rating of switching output DC [mA] : 100; (External protective circuit for inductive load (valve, contactor, etc.) necessary.); Switching frequency AC [Hz] : 1000; Switching frequency DC [Hz] : 1000; Max. switching power [W] : 10; Short-circuit proof : no; Overload protection : no; Response sensitivity [mT] : 2.1; Travel speed [m/s] : 10; Hysteresis [mm] : 1; Repeatability [mm] : -0.2...0.2; Max. fall time [ms] : 0.1; Max. make time incl. bounce [ms] : 0.6; Ambient temperature [°C] : -25...70; Mounting : flush mountable; Cylinder type : T-slot cylinders; Materials : housing: PA; fastening clamp: stainless steel; Switching cycles when connected to PLC [Mio] : < 40; Required protection : miniature fuse to IEC60127-2 sheet 1; ≤ 0,175 A; fast acting; Items supplied : rubber placeholder: 1 | Cable clip: 1; Cable: 0.3 m, PUR; Connector: 1 x M8; Locking: snap-fit