Ifm – OGP281

PHOTOELECTRIC SENSORS Ifm – OGP281
Qty
Retro-reflective sensor; Operating voltage [V] : 10…30 DC; (“supply class 2” to cULus); Rated insulation voltage [V] : 32; Protection class : III; Reverse polarity protection : yes; Max. power-on delay time [ms] : 300; Type of light : red light; Wave length [nm] : 662; Electrical design : PNP; Output function : light-on mode; Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 200; Switching frequency DC [Hz] : 1000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Range referred to prismatic reflector [m] : 0.1…4; (Prismatic reflector Ø 80 E20005); Max. light spot diameter [mm] : 160; Light spot dimensions refer to : at maximum range; Polarisation filter available : yes; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Device Identification; Device Diagnosis; Teach Channel; Switching Channel; SIO mode : yes; Required master port type : A; Min. process cycle time [ms] : 2.5; IO-Link process data (cyclical) : function: bit length | device status: 4 | binary switching information: 1; IO-Link functions (acyclical) : application specific tag; operating hours counter; switching cycles counter; Supported DeviceIDs : Type of operation: DeviceID | Default: 1145; Note : For further information please see the IODD PDF file under “Downloads”; Ambient temperature [°C] : -25…60; Storage temperature [°C] : -40…60; Housing : rectangular; Thread designation : M18 x 1; Materials : diecast zinc; PEI; Lens material : PMMA; Lens alignment : side lens; Items supplied : lock nut: 1
ConnectionConnector: 1 x M12
No. of inputs/outputsNumber of digital outputs: 2
Current consumption21 mA
Voltage supply24 V
Displayswitching status: 1 x LED, yellow | operation: 1 x LED, green
Degree of protectionIP 65; IP 67
Weight59 g
DimensionsM18 x 1 mm

Downloads

PDF
IFM OGP281 Datasheet PDF
Download