Ifm – PI1693

Flush pressure sensor with display

Flush pressure sensor with display

Flush pressure sensor with display

Flush pressure sensor with display

Flush pressure sensor with display

Flush pressure sensor with display

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...25 bar: -14.4...362.7 psi: -0.1...2.5 MPa; Set point SP : -0.96...25 bar: -13.8...362.7 psi: -0.096...2.5 MPa; Reset point rP : -1...24.96 bar: -14.4...362.1 psi: -0.1...2.496 MPa; Analogue start point : -1...18.74 bar: -14.4...271.8 psi: -0.1...1.874 MPa; Analogue end point : 5.24...25 bar: 76.2...362.7 psi: 0.524...2.5 MPa; In steps of : 0.02 bar: 0.3 psi: 0.002 MPa; Factory setting : SP1 = 6.24 bar: rP1 = 5.74 bar | SP2 = 18.74 bar: rP2 = 18.24 bar | ASP = 0.00 bar: AEP = 25.00 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 102; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L) stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L) stainless steel (1.4404 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L) stainless steel (1.4404 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN40 (1,5") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 34; Display unit : bar; psi; MPa; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.5...145 psi: -0.1...1 MPa; Set point SP : -0.98...10 bar: -14.2...145 psi: -0.098...1 MPa; Reset point rP : -1...9.98 bar: -14.5...144.7 psi: -0.1...0.998 MPa; Analogue start point : -1...7.5 bar: -14.5...108.7 psi: -0.1...0.75 MPa; Analogue end point : 1.5...10 bar: 21.8...145 psi: 0.15...1 MPa; In steps of : 0.01 bar: 0.1 psi: 0.001 MPa; Factory setting : SP1 = 2.50 bar: rP1 = 2.30 bar | SP2 = 7.50 bar: rP2 = 7.30 bar | ASP = 0.00 bar: AEP = 10.00 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 157; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L) stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L) stainless steel (1.4404 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L) stainless steel (1.4404 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN40 (1,5") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 34; Display unit : bar; psi; MPa; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...4 bar: -14.5...58 psi: -100...400 kPa; Set point SP : -0.99...4 bar: -14.35...58 psi: -99...400 kPa; Reset point rP : -1...3.99 bar: -14.5...57.85 psi: -100...399 kPa; Analogue start point : -1...3 bar: -14.5...43.5 psi: -100...300 kPa; Analogue end point : 0...4 bar: 0...58 psi: 0...400 kPa; In steps of : 0.005 bar: 0.05 psi: 0.5 kPa; Factory setting : SP1 = 1.000 bar: rP1 = 0.920 bar | SP2 = 3.000 bar: rP2 = 2.920 bar | ASP = 0.000 bar: AEP = 4.000 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 104; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...60; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN40 (1,5") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 34; Display unit : bar; psi; kPa; % of the span; Connector: 1 x M12; Contacts: gold-plated