Ifm – PI1698

Combined pressure sensor; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...100 bar: -15...1450 psi: -0.1...10 MPa; Set point SP : -0.8...100 bar: -12...1450 psi: -0.08...10 MPa; Reset point rP : -1...99.8 bar: -15...1448 psi: -0.1...9.98 MPa; Analogue start point : -1...75 bar: -15...1088 psi: -0.1...7.5 MPa; Analogue end point : 24...100 bar: 348...1450 psi: 2.4...10 MPa; In steps of : 0.1 bar: 1 psi: 0.01 MPa; Factory setting : SP1 = 25.0 bar: rP1 = 23 bar | SP2 = 75.0 bar: rP2 = 73 bar | ASP = 0.0 bar: AEP = 100.0 bar; Switch point accuracy [% of the span] : < ± 0,5; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,5; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...70 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (0...70 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 731; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA; Materials (wetted parts) : ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE; Min. pressure cycles : 100 million; Process connection : threaded connection G 1 external thread sealing cone; Display unit : bar; MPa; psi; % of the span

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.5...145 psi: -0.1...1 MPa; Set point SP : -0.98...10 bar: -14.2...145 psi: -0.098...1 MPa; Reset point rP : -1...9.98 bar: -14.5...144.7 psi: -0.1...0.998 MPa; Analogue start point : -1...7.5 bar: -14.5...108.7 psi: -0.1...0.75 MPa; Analogue end point : 1.5...10 bar: 21.8...145 psi: 0.15...1 MPa; In steps of : 0.01 bar: 0.1 psi: 0.001 MPa; Factory setting : SP1 = 2.50 bar: rP1 = 2.30 bar | SP2 = 7.50 bar: rP2 = 7.30 bar | ASP = 0.00 bar: AEP = 10.00 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 103; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN40 (1,5") DIN 32676 (ISO 2852) electropolished; Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 34; Display unit : bar; psi; MPa; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -50...1000 mbar: -0.73...14.5 psi: -5...100 kPa; Set point SP : -48...1000 mbar: -0.7...14.5 psi: -4.8...100 kPa; Reset point rP : -50...998 mbar: -0.73...14.47 psi: -0.5...99.8 kPa; Analogue start point : -50...750 mbar: -0.73...10.88 psi: -5...75 kPa; Analogue end point : 200...1000 mbar: 2.9...14.5 psi: 20...100 kPa; In steps of : 1 mbar: 0.01 psi: 0.1 kPa; Factory setting : SP1 = 250 mbar: rP1 = 230 mbar | SP2 = 750 mbar: rP2 = 730 mbar | ASP = 0 mbar: AEP = 1000 mbar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,3; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 106; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN50 (2") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 47.5; Display unit : mbar; kPa; psi; inH2O; mWS; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -50...1000 mbar: -0.73...14.5 psi: -5...100 kPa; Set point SP : -48...1000 mbar: -0.7...14.5 psi: -4.8...100 kPa; Reset point rP : -50...998 mbar: -0.73...14.47 psi: -0.5...99.8 kPa; Analogue start point : -50...750 mbar: -0.73...10.88 psi: -5...75 kPa; Analogue end point : 200...1000 mbar: 2.9...14.5 psi: 20...100 kPa; In steps of : 1 mbar: 0.01 psi: 0.1 kPa; Factory setting : SP1 = 250 mbar: rP1 = 230 mbar | SP2 = 750 mbar: rP2 = 730 mbar | ASP = 0 mbar: AEP = 1000 mbar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,3; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 106; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN40 (1,5") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 34; Display unit : mbar; kPa; psi; inH2O; mWS; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.124...2.5 bar: -1.8...36.27 psi: -12.4...250 kPa; Set point SP : -0.12...2.5 bar: -1.74...36.27 psi: -12...250 kPa; Reset point rP : -0.124...2.496 bar: -1.8...36.21 psi: -12.4...249.6 kPa; Analogue start point : -0.124...1.88 bar: -1.8...27.27 psi: -12.4...188 kPa; Analogue end point : 0.5...2.5 bar: 7.26...36.27 psi: 50...250 kPa; In steps of : 0.002 bar: 0.03 psi: 0.2 kPa; Factory setting : SP1 = 0.624 bar: rP1 = 0.574 bar | SP2 = 1.874 bar: rP2 = 1.824 bar | ASP = 0.000 bar: AEP = 2.500 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 105; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN40 (1,5") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 34; Display unit : bar; kPa; psi; inH2O; mWS; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1000...1000 mbar: -14.5...14.5 psi: -100...100 kPa; Set point SP : -998...1000 mbar: -14.45...14.5 psi: -99.8...100 kPa; Reset point rP : -1000...998 mbar: -14.5...14.45 psi: -100...99.8 kPa; Analogue start point : -1000...500 mbar: -14.5...7.25 psi: -100...50 kPa; Analogue end point : -500...1000 mbar: -7.25...14.5 psi: -50...100 kPa; In steps of : 1 mbar: 0.05 psi: 0.1 kPa; Factory setting : SP1 = -500 mbar: rP1 = -540 mbar | SP2 = 500 mbar: rP2 = 460 mbar | ASP = -1000 mbar: AEP = 1000 mbar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,3; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 108; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN40 (1,5") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 34; Display unit : mbar; kPa; psi; inH2O; mWS; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...4 bar: -14.5...58 psi: -100...400 kPa; Set point SP : -0.99...4 bar: -14.35...58 psi: -99...400 kPa; Reset point rP : -1...3.99 bar: -14.5...57.85 psi: -100...399 kPa; Analogue start point : -1...3 bar: -14.5...43.5 psi: -100...300 kPa; Analogue end point : 0...4 bar: 0...58 psi: 0...400 kPa; In steps of : 0.005 bar: 0.05 psi: 0.5 kPa; Factory setting : SP1 = 1.000 bar: rP1 = 0.920 bar | SP2 = 3.000 bar: rP2 = 2.920 bar | ASP = 0.000 bar: AEP = 4.000 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 104; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN50 (2") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 47.5; Display unit : bar; psi; kPa; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.5...145 psi: -0.1...1 MPa; Set point SP : -0.98...10 bar: -14.2...145 psi: -0.098...1 MPa; Reset point rP : -1...9.98 bar: -14.5...144.7 psi: -0.1...0.998 MPa; Analogue start point : -1...7.5 bar: -14.5...108.7 psi: -0.1...0.75 MPa; Analogue end point : 1.5...10 bar: 21.8...145 psi: 0.15...1 MPa; In steps of : 0.01 bar: 0.1 psi: 0.001 MPa; Factory setting : SP1 = 2.50 bar: rP1 = 2.30 bar | SP2 = 7.50 bar: rP2 = 7.30 bar | ASP = 0.00 bar: AEP = 10.00 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 103; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN50 (2") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 47.5; Display unit : bar; psi; MPa; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.124...2.5 bar: -1.8...36.27 psi: -12.4...250 kPa; Set point SP : -0.12...2.5 bar: -1.74...36.27 psi: -12...250 kPa; Reset point rP : -0.124...2.496 bar: -1.8...36.21 psi: -12.4...249.6 kPa; Analogue start point : -0.124...1.88 bar: -1.8...27.27 psi: -12.4...188 kPa; Analogue end point : 0.5...2.5 bar: 7.26...36.27 psi: 50...250 kPa; In steps of : 0.002 bar: 0.03 psi: 0.2 kPa; Factory setting : SP1 = 0.624 bar: rP1 = 0.574 bar | SP2 = 1.874 bar: rP2 = 1.824 bar | ASP = 0.000 bar: AEP = 2.500 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 105; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN50 (2") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 47.5; Display unit : bar; kPa; psi; inH2O; mWS; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1000...1000 mbar: -14.5...14.5 psi: -100...100 kPa; Set point SP : -998...1000 mbar: -14.45...14.5 psi: -99.8...100 kPa; Reset point rP : -1000...998 mbar: -14.5...14.45 psi: -100...99.8 kPa; Analogue start point : -1000...500 mbar: -14.5...7.25 psi: -100...50 kPa; Analogue end point : -500...1000 mbar: -7.25...14.5 psi: -50...100 kPa; In steps of : 1 mbar: 0.05 psi: 0.1 kPa; Factory setting : SP1 = -500 mbar: rP1 = -540 mbar | SP2 = 500 mbar: rP2 = 460 mbar | ASP = -1000 mbar: AEP = 1000 mbar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,3; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 108; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN50 (2") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 47.5; Display unit : mbar; kPa; psi; inH2O; mWS; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Integrated watchdog : yes; Step response time analogue output [ms] : 45; Min. response time of switching output (dAP) [ms] : 3; Step response time analogue output [ms] : 7; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Number of analogue outputs : 1; Analogue current output [mA] : 4...20, invertible; (scalable); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...25 bar: -14.4...362.7 psi: -0.1...2.5 MPa; Set point SP : -0.96...25 bar: -13.8...362.7 psi: -0.096...2.5 MPa; Reset point rP : -1...24.96 bar: -14.4...362.1 psi: -0.1...2.496 MPa; Analogue start point : -1...18.74 bar: -14.4...271.8 psi: -0.1...1.874 MPa; Analogue end point : 5.24...25 bar: 76.2...362.7 psi: 0.524...2.5 MPa; In steps of : 0.02 bar: 0.3 psi: 0.002 MPa; Factory setting : SP1 = 6.24 bar: rP1 = 5.74 bar | SP2 = 18.74 bar: rP2 = 18.24 bar | ASP = 0.00 bar: AEP = 25.00 bar; Switch point accuracy [% of the span] : < ± 0,2; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1); Linearity deviation [% of the span] : < ± 0,15; (Turn down 1:1); Hysteresis deviation [% of the span] : < ± 0,15; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,1; (Turn down 1:1; per year); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (0...200 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,15; (0...200 °C); Damping for the switching output dAP [s] : 0...30; Damping for the analogue output dAA [s] : 0.01...99.99; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.0; SDCI standard : IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 102; Ambient temperature [°C] : -25...80; Note on ambient temperature : Medium temperature: ≤ 160 °C; Ambient temperature [°C] : -25...65; Note on ambient temperature : Medium temperature: ≤ 200 °C; Storage temperature [°C] : -25...100; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA; Materials (wetted parts) : stainless steel (1.4435 / 316L); Min. pressure cycles : 10 million; Process connection : Clamp DN50 (2") DIN 32676 (ISO 2852); Surface characteristics Ra/Rz of the wetted parts : < 0.38 / -; Fill fluid for pressure transfer : NEOBEE (food grade, FDA compliant); Diaphragm diameter [mm] : 47.5; Display unit : bar; psi; MPa; % of the span; Connector: 1 x M12; Contacts: gold-plated

Flush pressure sensor with display