Ifm – PN4223

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.6...145 psi: -100...1000 kPa: -0.1...1 MPa; Analogue start point : -1...8 bar: -14.6...116 psi: -0.1...0.8 MPa; Analogue end point : 1...10 bar: 14.6...145 psi: 0.1...1 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.01; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.005; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...100 bar: 0...1450 psi: 0...10 MPa; Analogue start point : 0...80 bar: 0...1160 psi: 0...8 MPa; Analogue end point : 20...100 bar: 290...1450 psi: 2...10 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.05; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...600 bar: 0...8700 psi: 0...60 MPa; Analogue start point : 0...480 bar: 0...6960 psi: 0...48 MPa; Analogue end point : 120...600 bar: 1740...8700 psi: 12...60 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.2; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (-25...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (-25...80 °C); Response time [ms] : < 1.5; Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...4; Damping for the analogue output dAA [s] : 0...4; Max. response time analogue output [ms] : 3; Parameter setting options : hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (wenn PIN 2 nicht verbunden: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 458 | Status_B High Resolution / CMPT = 3: 637; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : 1.4542 (17-4 PH / 630); Min. pressure cycles : 100 million; Tightening torque [Nm] : 30...50; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.05...1 bar: -50...1000 mbar: -0.72...14.5 psi: -20.1...401.5 inH2O: -5...100 kPa; Analogue start point : -50...800 mbar: -0.72...11.6 psi: -20...321 inH2O: -5...80 kPa; Analogue end point : 150...1000 mbar: 2.18...14.5 psi: 60.5...401.5 inH2O: 15...100 kPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [mbar] : 1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [mbar] : 0.5; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : < 1.5; Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...4; Damping for the analogue output dAA [s] : 0...4; Max. response time analogue output [ms] : 3; Parameter setting options : hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (wenn PIN 2 nicht verbunden: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 465 | Status_B High Resolution / CMPT = 3: 976; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : stainless steel (1.4404 / 316L); AI2O3 (96%; ceramics); FKM; Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...600 bar: 0...8700 psi: 0...60 MPa; Analogue start point : 0...480 bar: 0...6960 psi: 0...48 MPa; Analogue end point : 120...600 bar: 1740...8700 psi: 12...60 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.2; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (-25...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (-25...80 °C); Response time [ms] : < 1.5; Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...4; Damping for the analogue output dAA [s] : 0...4; Max. response time analogue output [ms] : 3; Parameter setting options : hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (wenn PIN 2 nicht verbunden: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 458 | Status_B High Resolution / CMPT = 3: 637; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : 1.4542 (17-4 PH / 630); Min. pressure cycles : 100 million; Tightening torque [Nm] : 30...50; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.125...2.5 bar: -125...2500 mbar: -1.8...36.25 psi: -12.5...250 kPa; Set point SP : -0.11...2.5 bar: -1.6...36.25 psi: -11...250 kPa; Reset point rP : -0.12...2.49 bar: -1.75...36.1 psi: -12...249 kPa; Analogue start point : -0.125...2 bar: -1.8...29 psi: -12.5...200 kPa; Analogue end point : 0.375...2.5 bar: 5.45...36.25 psi: 37.5...250 kPa; In steps of : 0.005 bar: 0.05 psi: 0.5 kPa; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : < 1.5; Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...4; Damping for the analogue output dAA [s] : 0...4; Max. response time analogue output [ms] : 3; Parameter setting options : hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 464; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : stainless steel (1.4404 / 316L); AI2O3 (96%; ceramics); FKM; Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...250 bar: 0...3625 psi: 0...25 MPa; Analogue start point : 0...200 bar: 0...2900 psi: 0...20 MPa; Analogue end point : 50...250 bar: 725...3625 psi: 5...25 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (-25...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (-25...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...400 bar: 0...5800 psi: 0...40 MPa; Analogue start point : 0...320 bar: 0...4640 psi: 0...32 MPa; Analogue end point : 80...400 bar: 1160...5800 psi: 8...40 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.2; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (-25...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (-25...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...25 bar: -14.5...362.5 psi: -0.1...2.5 MPa; Analogue start point : -1...20 bar: -14.5...290 psi: -0.1...2 MPa; Analogue end point : 4...25 bar: 58...362.5 psi: 0.4...2.5 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.01; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...100 bar: 0...1450 psi: 0...10 MPa; Analogue start point : 0...80 bar: 0...1160 psi: 0...8 MPa; Analogue end point : 20...100 bar: 290...1450 psi: 2...10 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.05; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; Process connection : threaded connection 1/4" NPT internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...10 bar: -14.6...145 psi: -100...1000 kPa: -0.1...1 MPa; Analogue start point : -1...8 bar: -14.6...116 psi: -0.1...0.8 MPa; Analogue end point : 1...10 bar: 14.6...145 psi: 0.1...1 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.01; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.005; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...1 bar: -1000...1000 mbar: -14.5...14.5 psi: -29.5...29.5 inHg: -402...402 inH2O: -100...100 kPa; Analogue start point : -1000...600 mbar: -14.5...8.7 psi: -29.5...17.7 inHg: -402...240 inH2O: -100...60 kPa; Analogue end point : -600...1000 mbar: -8.7...14.5 psi: -17.7...29.5 inHg: -240...402 inH2O: -60...100 kPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [mbar] : 1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT internal thread; Restrictor element integrated : no (can be retrofitted)