Ifm – PN7809

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; (200 (...60 °C) 250 (...40 °C)); Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range [MPa] : 0...10; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [MPa] : 0.01; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [MPa] : 0.005; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Delay time programmable dS, dr [s] : 0...50; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (when pin 2 not connected: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 437 | Status_B High Resolution / CMPT = 3: 622; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : stainless steel (1.4404 / 316L); ceramics; FKM; Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; (200 (...60 °C) 250 (...40 °C)); Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range [kPa] : 0...250; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [kPa] : 1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [kPa] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : < 3; Delay time programmable dS, dr [s] : 0...50; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (when pin 2 not connected: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 440 | Status_B High Resolution / CMPT = 3: 625; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : stainless steel (1.4404 / 316L); ceramics; FKM; Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; (200 (...60 °C) 250 (...40 °C)); Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range [MPa] : 0...2.5; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [MPa] : 0.01; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [MPa] : 0.001; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : < 3; Delay time programmable dS, dr [s] : 0...50; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (when pin 2 not connected: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 438 | Status_B High Resolution / CMPT = 3: 623; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : stainless steel (1.4404 / 316L); ceramics; FKM; Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; (200 (...60 °C) 250 (...40 °C)); Switching frequency DC [Hz] : < 170; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range [MPa] : 0...25; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [MPa] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [MPa] : 0.01; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (-25...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (-25...80 °C); Response time [ms] : < 3; Delay time programmable dS, dr [s] : 0...50; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (when pin 2 not connected: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 436 | Status_B High Resolution / CMPT = 3: 621; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : 1.4542 (17-4 PH / 630); Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 internal thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...400 bar: 0...5800 psi: 0...40 MPa; Analogue start point : 0...320 bar: 0...4640 psi: 0...32 MPa; Analogue end point : 80...400 bar: 1160...5800 psi: 8...40 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [bar] : 0.2; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (-25...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (-25...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.5...0.5 bar: -500...500 mbar: -7.26...7.26 psi: -201...201 inH2O: -50...50 kPa; Analogue start point : -500...300 mbar: -7.26...4.36 psi: -201...120 inH2O: -50...30 kPa; Analogue end point : -300...500 mbar: -4.36...7.26 psi: -120...201 inH2O: -30...50 kPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [mbar] : 1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [mbar] : 0.5; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : < 1.5; Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...4; Damping for the analogue output dAA [s] : 0...4; Max. response time analogue output [ms] : 3; Parameter setting options : hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; (wenn PIN 2 nicht verbunden: B); Supported DeviceIDs : Type of operation: DeviceID | Factory setting / CMPT = 2: 468 | Status_B High Resolution / CMPT = 3: 984; Note : For further information please see the IODD PDF file under "Downloads"; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; Materials (wetted parts) : stainless steel (1.4404 / 316L); AI2O3 (96%; ceramics); FKM; Min. pressure cycles : 100 million; Tightening torque [Nm] : 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating); Process connection : threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5; Process connection sealing : FKM (DIN EN ISO 1179-2); Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.05...1 bar: -50...1000 mbar: -0.72...14.5 psi: -20.1...401.5 inH2O: -5...100 kPa; Analogue start point : -50...800 mbar: -0.72...11.6 psi: -20...321 inH2O: -5...80 kPa; Analogue end point : 150...1000 mbar: 2.18...14.5 psi: 60.5...401.5 inH2O: 15...100 kPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [mbar] : 1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link resolution pressure [mbar] : 0.5; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.0125...0.25 bar: -12.5...250 mbar: -5...100.4 inH2O: -1.25...25 kPa: -127...2549 mmWS; Analogue start point : -12.5...200 mbar: -5...80.2 inH2O: -1.25...20 kPa: -125...2040 mmWS; Analogue end point : 37.5...250 mbar: 15...100.4 inH2O: 3.75...25 kPa: 385...2550 mmWS; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [mbar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...1 bar: -1000...1000 mbar: -14.5...14.5 psi: -29.5...29.5 inHg: -402...402 inH2O: -100...100 kPa; Analogue start point : -1000...600 mbar: -14.5...8.7 psi: -29.5...17.7 inHg: -402...240 inH2O: -100...60 kPa; Analogue end point : -600...1000 mbar: -8.7...14.5 psi: -17.7...29.5 inHg: -240...402 inH2O: -60...100 kPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [mbar] : 1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -0.125...2.5 bar: -125...2500 mbar: -1.8...36.25 psi: -12.5...250 kPa; Analogue start point : -0.125...2 bar: -1.8...29 psi: -12.5...200 kPa; Analogue end point : 0.375...2.5 bar: 5.45...36.25 psi: 37.5...250 kPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.001; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : -1...25 bar: -14.5...362.5 psi: -0.1...2.5 MPa; Analogue start point : -1...20 bar: -14.5...290 psi: -0.1...2 MPa; Analogue end point : 4...25 bar: 58...362.5 psi: 0.4...2.5 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.01; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Temperature coefficient span [% of the span / 10 K] : < ± 0,2; (-0...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)

Pressure sensor with display; Operating voltage [V] : 18...30 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; Switching frequency DC [Hz] : < 500; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable 1:5); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable 1:5); Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...250 bar: 0...3625 psi: 0...25 MPa; Analogue start point : 0...200 bar: 0...2900 psi: 0...20 MPa; Analogue end point : 50...250 bar: 725...3625 psi: 5...25 MPa; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; Min. process cycle time [ms] : 2.3; IO-Link resolution pressure [bar] : 0.1; IO-Link process data (cyclical) : function: bit length | pressure: 14 | binary switching information: 2; IO-Link functions (acyclical) : application specific tag; Profiles : Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000); Min. process cycle time [ms] : 3; IO-Link process data (cyclical) : function: bit length | pressure: 16 | device status: 4 | binary switching information: 2; Notes on the accuracy / deviation : switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%; Switch point accuracy [% of the span] : < ± 0,4; (Turn down 1:1); Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,1; (Turn down 1:1); Long-term stability [% of the span] : < ± 0,05; (Turn down 1:1; per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (-25...80 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (-25...80 °C); Response time [ms] : 50; (depends on lubrication, seal and pressure rating); Process connection : threaded connection 1/4" NPT external thread; Restrictor element integrated : no (can be retrofitted)