Ifm – PQ7809

Pressure sensor for pneumatics; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Overvoltage protection : yes; (< 40 V); Power-on delay time [s] : 0.5; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 100; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Measuring range : -1...10 bar: -15...145 psi: -30...296 inHg: -100...1000 kPa; Set point SP : -0.9...10 bar: -13...145 psi: -26...296 inHg: -90...1000 kPa; Reset point rP : -0.95...9.95 bar: -14...144 psi: -28...294 inHg: -95...995 kPa; In steps of : 0.05 bar: 1 psi: 2 inHg: 5 kPa; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...60 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...60 °C); Response time [ms] : < 6; Delay time programmable dS, dr [s] : 0; 0,002...5; Step response time analogue output [ms] : 6; Parameter setting options : hysteresis / window; normally open / normally closed; analogue output; IO-Link; switching logic; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9 FDIS; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 367; Ambient temperature [°C] : 0...70; Storage temperature [°C] : -25...85; Materials : PBT; FKM; polyester; Materials (wetted parts) : brass; FKM; silicon (coated); PBT; Min. pressure cycles : 50 million; Process connection : threaded connection G 1/8 internal thread internal thread:M5; Display unit : bar; kPa; psi; inHg

Pressure sensor for pneumatics; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Overvoltage protection : yes; (< 40 V); Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; Electrical design : NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 200; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Measuring range : -1...1 bar: -1000...1000 mbar; Set point SP [bar] : -0.98...1; Reset point rP [bar] : -0.99...0.99; In steps of [bar] : 0.01; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...60 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...60 °C); Response time [ms] : < 2.5; Delay time programmable dS, dr [s] : 0; 0,002...5; Parameter setting options : hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit; Ambient temperature [°C] : 0...70; Storage temperature [°C] : -25...85; Materials : PBT; FKM; polyester; Materials (wetted parts) : brass; FKM; silicon (coated); PBT; Min. pressure cycles : 50 million; Process connection : threaded connection G 1/8 internal thread; Display unit : bar; kPa; psi; inHg; Accessories (optional) : mounting set for DIN rail: TH 35-7,5 / EN60715, E37340 | Thread extension: 1/8", E30075 | push-in air fitting for tube: Ø 6 mm, E30076 | push-in air fitting for tube: Ø 8 mm, E30077

Pressure sensor for pneumatics; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Overvoltage protection : yes; (< 40 V); Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; Electrical design : NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 200; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Measuring range [bar] : -1...10; Set point SP [bar] : -0.9...10; Reset point rP [bar] : -0.95...9.95; In steps of [bar] : 0.05; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...60 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...60 °C); Response time [ms] : < 2.5; Delay time programmable dS, dr [s] : 0; 0,002...5; Parameter setting options : hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit; Ambient temperature [°C] : 0...70; Storage temperature [°C] : -25...85; Materials : PBT; FKM; polyester; Materials (wetted parts) : brass; FKM; silicon (coated); PBT; Min. pressure cycles : 50 million; Process connection : threaded connection G 1/8 internal thread; Display unit : bar; kPa; psi; inHg; Accessories (optional) : mounting set for DIN rail: TH 35-7,5 / EN60715, E37340 | Thread extension: 1/8", E30075 | push-in air fitting for tube: Ø 6 mm, E30076 | push-in air fitting for tube: Ø 8 mm, E30077

Pressure sensor for pneumatics; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Overvoltage protection : yes; (< 40 V); Power-on delay time [s] : 0.5; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 100; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Measuring range : -1...1 bar: -1000...1000 mbar: -14.6...14.6 psi: -29.4...29.4 inHg: -100...100 kPa; Set point SP : -0.98...1 bar: -14.2...14.6 psi: -28.8...29.4 inHg: -98...100 kPa; Reset point rP : -0.99...0.99 bar: -14.4...14.4 psi: -29.1...29.1 inHg: -99...99 kPa; In steps of : 0.01 bar: 0.2 psi: 0.3 inHg: 1 kPa; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...60 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...60 °C); Response time [ms] : < 6; Delay time programmable dS, dr [s] : 0; 0,002...5; Step response time analogue output [ms] : 6; Parameter setting options : hysteresis / window; normally open / normally closed; analogue output; IO-Link; switching logic; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9 FDIS; Profiles : Smart Sensor: Process Data Variable; Device Identification; SIO mode : yes; Required master port type : A; Process data analogue : 1; Process data binary : 2; Min. process cycle time [ms] : 2.3; Supported DeviceIDs : Type of operation: DeviceID | Default: 366; Ambient temperature [°C] : 0...70; Storage temperature [°C] : -25...85; Materials : PBT; FKM; polyester; Materials (wetted parts) : brass; FKM; silicon (coated); PBT; Min. pressure cycles : 50 million; Process connection : threaded connection G 1/8 internal thread internal thread:M5; Display unit : bar; kPa; psi; inHg

Pressure sensor for pneumatics; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Overvoltage protection : yes; (< 40 V); Power-on delay time [s] : 0.3; Integrated watchdog : yes; Total number of outputs : 2; Output signal : switching signal; Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : < 200; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Measuring range : -1...10 bar: -15...145 psi: -30...296 inHg: -100...1000 kPa; Set point SP : -0.9...10 bar: -13...145 psi: -26...296 inHg: -90...1000 kPa; Reset point rP : -0.95...9.95 bar: -14...144 psi: -28...294 inHg: -95...995 kPa; In steps of : 0.05 bar: 1 psi: 2 inHg: 5 kPa; Switch point accuracy [% of the span] : < ± 0,5; Repeatability [% of the span] : < ± 0,1; (with temperature fluctuations < 10 K); Characteristics deviation [% of the span] : < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting); Hysteresis deviation [% of the span] : < ± 0,25; Long-term stability [% of the span] : < ± 0,05; (per 6 months); Temperature coefficient zero point [% of the span / 10 K] : 0,2; (0...60 °C); Temperature coefficient span [% of the span / 10 K] : 0,2; (0...60 °C); Response time [ms] : < 2.5; Delay time programmable dS, dr [s] : 0; 0,002...5; Parameter setting options : hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit; Ambient temperature [°C] : 0...70; Storage temperature [°C] : -25...85; Materials : PBT; FKM; polyester; Materials (wetted parts) : brass; FKM; silicon (coated); PBT; Min. pressure cycles : 50 million; Process connection : threaded connection G 1/8 internal thread; Display unit : bar; kPa; psi; inHg; Accessories (optional) : mounting set for DIN rail: TH 35-7,5 / EN60715, E37340 | Thread extension: 1/8", E30075 | push-in air fitting for tube: Ø 6 mm, E30076 | push-in air fitting for tube: Ø 8 mm, E30077