Ifm – RU1114

Infrared temperature sensor; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (50 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 1; Test input : type 3 (IEC 61131-2); Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Short-circuit proof : yes; Overload protection : yes; Wave length range [µm] : 0.78...1.06; Measuring range : 500...2500 °C: 932...4532 °F; Set point SP : 502...2500 °C: 936...4532 °F; Reset point rP : 500...2498 °C: 932...4528 °F; Analogue start point : 500...2100 °C: 932...3812 °F; Analogue end point : 900...2500 °C: 1652...4532 °F; In steps of : 1 °C: 1 °F; Resolution of switching output [K] : 1; Resolution of analogue output [K] : 0.2; (+ 0.03% of the set measuring span); Resolution of display [K] : 1; Accuracy [K] : 900 °C); Adjustment of the switch point : programming buttons; Parameter setting options : analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; Process data analogue : 16; Process data binary : 1; Min. process cycle time [ms] : 3.6; Supported DeviceIDs : Type of operation: DeviceID | Default: 718; Ambient temperature [°C] : 0...65; Storage temperature [°C] : -20...80; Max. relative air humidity [%] : 95; (non condensing); Housing : threaded type; Thread designation : M30 x 1.5; Materials : threaded sleeve: stainless steel (1.4305 / 303); polyester; Lens material : tempered optical glass; Operating elements : 3: pushbuttons; Items supplied : lock nuts: 2

Infrared temperature sensor; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (50 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 1; Test input : type 3 (IEC 61131-2); Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Short-circuit proof : yes; Overload protection : yes; Wave length range [µm] : 8...14; Measuring range : 0...999.5 °C: 32...1831 °F; Set point SP : 1...999.5 °C: 34...1831 °F; Reset point rP : 0...998.5 °C: 32...1829 °F; Analogue start point : 0...949.5 °C: 32...1741.1 °F; Analogue end point : 50...999.5 °C: 122...1831 °F; In steps of : 0.5 °C: 1 °F; Resolution of switching output [K] : 0.5; Resolution of analogue output [K] : 0.2; (+ 0.03% of the set measuring span); Resolution of display [K] : 0.5; Accuracy [K] : < ± 1 %; (of measured value, min. 2 K (degree of emission = 1, T = 23 °C)); Repeatability [K] : 1; Response time [ms] : 100; Adjustment of the switch point : programming buttons; Parameter setting options : analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; Process data analogue : 16; Process data binary : 1; Min. process cycle time [ms] : 3.6; Supported DeviceIDs : Type of operation: DeviceID | Default: 716; Ambient temperature [°C] : 0...65; Storage temperature [°C] : -20...80; Max. relative air humidity [%] : 95; (non condensing); Housing : threaded type; Thread designation : M30 x 1.5; Materials : threaded sleeve: stainless steel (1.4305 / 303); polyester; Lens material : Infrared transparent crystal lens with anti-reflex coating; Operating elements : 3: pushbuttons; Items supplied : lock nuts: 2

Infrared temperature sensor; Operating voltage [V] : 18...32 DC; (to SELV/PELV); Min. insulation resistance [MΩ] : 100; (50 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 1; Test input : type 3 (IEC 61131-2); Total number of outputs : 2; Output signal : switching signal; analogue signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 150; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Short-circuit proof : yes; Overload protection : yes; Wave length range [µm] : 1...1.7; Measuring range : 250...1600 °C: 482...2912 °F; Set point SP : 251...1600 °C: 484...2912 °F; Reset point rP : 250...1599 °C: 482...2910 °F; Analogue start point : 250...1400 °C: 482...2552 °F; Analogue end point : 450...1600 °C: 842...2912 °F; In steps of : 1 °C: 1 °F; Resolution of switching output [K] : 1; Resolution of analogue output [K] : 0.2; (+ 0.03% of the set measuring span); Resolution of display [K] : 1; Accuracy [K] : 600 °C); Adjustment of the switch point : programming buttons; Parameter setting options : analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; SIO mode : yes; Required master port type : A; Process data analogue : 16; Process data binary : 1; Min. process cycle time [ms] : 3.6; Supported DeviceIDs : Type of operation: DeviceID | Default: 717; Ambient temperature [°C] : 0...65; Storage temperature [°C] : -20...80; Max. relative air humidity [%] : 95; (non condensing); Housing : threaded type; Thread designation : M30 x 1.5; Materials : threaded sleeve: stainless steel (1.4305 / 303); polyester; Lens material : tempered optical glass; Operating elements : 3: pushbuttons; Items supplied : lock nuts: 2

Ultrasonic sensor; Operating voltage [V] : 10...30 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Converter frequency [kHz] : 200; Total number of outputs : 1; Electrical design : NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : 2; Short-circuit protection : yes; Overload protection : yes; Sensing range [mm] : Target: 200 x 200 mm; Angle of aperture cylindrical [°] : 14; (±2); Monitoring range final value [mm] : 2200; Temperature compensation : yes; Hysteresis [%] : < 2; Switch point drift [%] : -2...2; Notes on the accuracy / deviation : The indicated values are reached after a warm-up time of min. 20 minutes; Repeatability : 1 %; Resolution [mm] : 1; Ambient temperature [°C] : -20...70; Storage temperature [°C] : -30...80; Housing : threaded type; Thread designation : M18 x 1; Materials : stainless steel (1.4404 / 316L); PA; epoxy glass ceramics; Tightening torque [Nm] : 50; Teach function : yes; Items supplied : lock nuts: 2, stainless steel

Ultrasonic sensor; Operating voltage [V] : 10...30 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 0.3; Converter frequency [kHz] : 300; Synchronisation input : no; Multiplex input : no; Total number of outputs : 1; Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.2; Permanent current rating of switching output DC [mA] : 100; Switching frequency DC [Hz] : 8; Short-circuit protection : yes; Overload protection : yes; Sensing range [mm] : 40...300; (Target: 200 x 200 mm); Blind zone [mm] : 40; Angle of aperture cylindrical [°] : 15; (±2); Max. deviation from the 90° angle sensor/object [°] : ± 4; Temperature compensation : yes; Hysteresis [%] : < 1; Switch point drift [%] : -5...5; Notes on the accuracy / deviation : The indicated values are reached after a warm-up time of min. 20 minutes; Repeatability : 1 %; Resolution [mm] : 2; Ambient temperature [°C] : -20...70; Storage temperature [°C] : -30...80; Housing : threaded type; Thread designation : M18 x 1; Materials : PBT; PA; epoxy glass ceramics; Tightening torque [Nm] : 1; Items supplied : lock nuts: 2, plastics | rubber washers: 2

Temperature probe sensor; Protection class : III; Probe length L [mm] : 150; Measuring range : -40...150 °C: -40...302 °F; Accuracy [K] : ± (0,15 K + 0,002 x|t|); Dynamic response T05 / T09 [s] : 1 / 3; (to DIN EN 60751); Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); Materials (wetted parts) : stainless steel (1.4404 / 316L); Process connection : diameter Ø 6 mm; Probe diameter [mm] : 6; Installation length EL [mm] : 150

Temperature probe sensor; Protection class : III; Probe length L [mm] : 200; Measuring range : -40...150 °C: -40...302 °F; Accuracy [K] : ± (0,15 K + 0,002 x|t|); Dynamic response T05 / T09 [s] : 1 / 3; (to DIN EN 60751); Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); Materials (wetted parts) : stainless steel (1.4404 / 316L); Probe diameter [mm] : 6; Installation length EL [mm] : 200

Temperature probe sensor; Protection class : III; Probe length L [mm] : 250; Measuring range : -40...150 °C: -40...302 °F; Accuracy [K] : ± (0,15 K + 0,002 x|t|); Dynamic response T05 / T09 [s] : 1 / 3; (to DIN EN 60751); Ambient temperature [°C] : -25...80; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); Materials (wetted parts) : stainless steel (1.4404 / 316L); Process connection : diameter Ø 6 mm; Probe diameter [mm] : 6; Installation length EL [mm] : 250

Temperature transmitter; Operating voltage [V] : 8...32 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Total number of outputs : 1; Output signal : analogue signal; Number of analogue outputs : 1; Analogue voltage output [V] : 0.5...4.5; Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Overload protection : yes; Measuring range : -50...150 °C: -58...302 °F; Resolution of analogue output [K] : 0.1; Precision analogue output [K] : ± 0,3 + (± 0,1 % MS); Temperature coefficient [% of the span / 10 K] : 0,1; (in case of deviation from the reference condition 25 ± 5 °C); Dynamic response T05 / T09 [s] : 1 / 3; (to DIN EN 60751); Ambient temperature [°C] : -40...100; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PPS; FKM; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; Process connection : threaded connection G 1/4 external thread; Probe diameter [mm] : 6; Installation length EL [mm] : 25

Temperature probe sensor; Protection class : III; Probe length L [mm] : 360; Measuring range : -40...150 °C: -40...302 °F; Accuracy [K] : ± (0,15 K + 0,002 x|t|); Dynamic response T05 / T09 [s] : 1 / 3; (to DIN EN 60751); Ambient temperature [°C] : -25...80; Note on ambient temperature : plug area; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); Materials (wetted parts) : stainless steel (1.4404 / 316L); Probe diameter [mm] : 10; Installation length EL [mm] : 360

Temperature transmitter; Operating voltage [V] : 8...32 DC; ("supply class 2" to cULus); Protection class : III; Reverse polarity protection : yes; Total number of outputs : 1; Output signal : analogue signal; Number of analogue outputs : 1; Analogue voltage output [V] : 0.5...4.5; Min. load resistance [Ω] : 2000; Short-circuit protection : yes; Overload protection : yes; Measuring range : -50...150 °C: -58...302 °F; Resolution of analogue output [K] : 0.1; Precision analogue output [K] : ± 0,3 + (± 0,1 % MS); Temperature coefficient [% of the span / 10 K] : 0,1; (in case of deviation from the reference condition 25 ± 5 °C); Dynamic response T05 / T09 [s] : 1 / 3; (to DIN EN 60751); Ambient temperature [°C] : -40...100; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); PEI; FKM; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; Process connection : threaded connection G 1/4 external thread; Probe diameter [mm] : 6; Installation length EL [mm] : 25

Temperature probe sensor; Protection class : III; Probe length L [mm] : 160; Measuring range : -40...150 °C: -40...302 °F; Accuracy [K] : ± (0,15 K + 0,002 x|t|); Dynamic response T05 / T09 [s] : 1 / 3; (to DIN EN 60751); Ambient temperature [°C] : -25...80; Note on ambient temperature : plug area; Storage temperature [°C] : -40...100; Materials : stainless steel (1.4404 / 316L); Materials (wetted parts) : stainless steel (1.4404 / 316L); Probe diameter [mm] : 10; Installation length EL [mm] : 160