Ifm – SD5000

Compressed air meter; Operating voltage [V] : 18…30 DC; (according to EN 50178 SELV/PELV); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 1; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; IO-Link; (configurable); Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4…20; (scalable); Max. load [Ω] : 500; Pulse output : consumed quantity meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 1…250 l/min: 0.3…82.9 m/s: 0.04…15 m³/h; Display range : 0…300 l/min: 0…99.5 m/s: 0…18 m³/h; Set point SP : 2…250 l/min: 0.7…82.9 m/s: 0.12…15 m³/h; Reset point rP : 1…249 l/min: 0.3…82.5 m/s: 0.04…14.92 m³/h; Analogue start point ASP : 0…187.5 l/min: 0…62.2 m/s: 0…11.26 m³/h; Analogue end point AEP : 62.5…250 l/min: 20.7…82.9 m/s: 3.74…15 m³/h; In steps of : 0.5 l/min: 0.1 m/s: 0.02 m³/h; Pulse value : 0.001…1000000 m³; In steps of : 0.001 m³; Pulse length [s] : 0,1…2; Accuracy [K] : ± 2; (medium flow in the limit area of the flow measurement range); Response time [s] : 0.1; (dAP = 0); Damping for the switching output dAP in steps [s] : 0 – 0,2 – 0,4 – 0,6 – 0,8 – 1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9 CDV; Profiles : no profile; SIO mode : yes; Required master port type : A; Process data analogue : 3; Process data binary : 2; Min. process cycle time [ms] : 4.1; Supported DeviceIDs : Type of operation: DeviceID | Default: 260; Ambient temperature [°C] : 0…60; Storage temperature [°C] : -20…85; Max. relative air humidity [%] : 90; Materials : PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; FKM; aluminium powder-coated; Materials (wetted parts) : stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK GF30; polyester; aluminium; Process connection : threaded connection G 1/4 DN8