Ifm – SV4614

Vortex flow meter with display; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 3; Total number of outputs : 2; Output signal : switching signal; frequency signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Overload protection : yes; Measuring range : 1...20 l/min: 0.06...1.2 m³/h; Display range : 0...24 l/min: 0...1.44 m³/h; Resolution : 0.1 l/min: 0.005 m³/h; Set point SP : 1.2...20 l/min: 0.07...1.2 m³/h; Reset point rP : 1...19.8 l/min: 0.06...1.19 m³/h; Frequency end point, FEP : 4...20 l/min: 0.24...1.2 m³/h; In steps of : 0.1 l/min: 0.005 m³/h; Frequency at the end point FRP [Hz] : 100...1000; Measuring dynamics : 1:20; Dynamic response T05 / T09 [s] : T09 = 6; Response time [s] : 1; (dAP = 0); Damping for the switching output dAP [s] : 0...5; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; frequency output; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 3; Supported DeviceIDs : Type of operation: DeviceID | Default: 484; Ambient temperature [°C] : 0...60; Note on ambient temperature : medium temperature < 80 °C | medium temperature < 90 °C: 0...50 °C; Storage temperature [°C] : -20...80; Materials : stainless steel (1.4404 / 316L); PC; PBT+PC-GF30; PPS; TPE-U; Materials (wetted parts) : stainless steel (1.4404 / 316L); ETFE; PA 6T; PPS; FKM; Tightening torque [Nm] : 30; Process connection : threaded connection Rc 1/2 internal thread DN8

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...200 l/min: 0...12 m³/h; Display range : 0...240 l/min: 0...14.4 m³/h; Resolution : 0.1 l/min: 0.01 m³/h; Set point SP : 0.4...200 l/min: 0.02...12 m³/h; Reset point rP : 0...199.6 l/min: 0...11.98 m³/h; Analogue start point ASP : 0...160 l/min: 0...9.6 m³/h; Analogue end point AEP : 40...200 l/min: 2.4...12 m³/h; Max. flow rate : 220 l/min: 13.2 m³/h; In steps of : 0.1 l/min: 0.01 m³/h; Pulse value : 0.1 l...100000 m³; Pulse length [s] : 0,0125...2; Dynamic response T05 / T09 [s] : T09 = 30 (Q > 20 l/min); (water); Response time [s] : 0.25; (dAP = 0); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PPS; Centellen 200; Process connection : threaded connection G 1 1/4 flat seal; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x R 1, stainless steel, E40205

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 2; Output signal : switching signal; Electrical design : PNP; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...50 l/min: 0...13.2 gpm; Display range : 0...60 l/min: 0...15.9 gpm; Resolution : 0.1 l/min: 0.02 gpm; Set point SP : 0.1...50 l/min: 0.04...13.22 gpm; Reset point rP : 0...49.9 l/min: 0...13.18 gpm; Max. flow rate [l/min] : 60; In steps of : 0.1 l/min: 0.02 gpm; Dynamic response T05 / T09 [s] : T09 = 70 (Q > 5 l/min); (water); Response time [s] : 0.25; (dAP = 0); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...1; Parameter setting options : Flow monitoring; Temperature monitoring; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PES; Centellen 200; Process connection : threaded connection G 3/4 flat seal; Display unit : l/min; m³/h; gpm; gph; °C; °F; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x R1/2, stainless steel, E40178 | adapter for pipe: 1 x 1/2" NPT, stainless steel, E40191 | adapter for pipe: 1 x R1/2, brass, E40151 | adapter for pipe: 1 x 1/2" NPT, brass, E40154

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...1585 gph: 0...26.44 gpm; Display range : 0...1902 gph: 0...31.72 gpm; Resolution : 1 gph: 0.02 gpm; Set point SP : 4...1585 gph: 0.06...26.44 gpm; Reset point rP : 0...1581 gph: 0...26.38 gpm; Analogue start point ASP : 0...1285 gph: 0...21.44 gpm; Analogue end point AEP : 300...1585 gph: 5...26.44 gpm; Max. flow rate : 1902 gph: 31.7 gpm; In steps of : 1 gph: 0.02 gpm; Pulse value : 0.02...9000 * 10³ gal; In steps of : 0.02 gal; Pulse length [s] : 0,3...2; Dynamic response T05 / T09 [s] : T09 = 70 (Q > 1 gpm); (water); Response time [s] : 0.25; (dAP = 0); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; Ambient temperature [°F] : 14...140; Storage temperature [°F] : -13...176; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PES; Centellen 200; Process connection : threaded connection G 1 flat seal; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x 1/2" NPT, stainless steel, E40192 | adapter for pipe: 1 x 3/4" NPT, stainless steel, E40193 | adapter for pipe: 1 x 1/2" NPT, brass, E40155 | adapter for pipe: 1 x 3/4" NPT, brass, E40156

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...100 l/min: 0...6 m³/h; Display range : 0...120 l/min: 0...7.2 m³/h; Resolution : 0.1 l/min: 0.005 m³/h; Set point SP : 0.2...100 l/min: 0.01...6 m³/h; Reset point rP : 0...99.8 l/min: 0...5.99 m³/h; Analogue start point ASP : 0...80 l/min: 0...4.8 m³/h; Analogue end point AEP : 20...100 l/min: 1.2...6 m³/h; Max. flow rate : 110 l/min: 6.6 m³/h; In steps of : 0.1 l/min: 0.005 m³/h; Pulse value : 0.1 l...1 000 000 m³; Pulse length [s] : 0,025...2; Dynamic response T05 / T09 [s] : T09 = 70 (Q > 5 l/min); (water); Response time [s] : 0.25; (dAP = 0); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PES; Centellen 200; Process connection : threaded connection G 1 flat seal; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x R 1/2, stainless steel, E40179 | adapter for pipe: 1 x R 3/4, stainless steel, E40180 | adapter for pipe: 1 x R 1/2, brass, E40152 | adapter for pipe: 1 x R 3/4, brass, E40153

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...200 l/min: 0...52.84 gpm; Display range : 0...240 l/min: 0...63.42 gpm; Resolution : 0.1 l/min: 0.02 gpm; Analogue start point ASP : 0...160 l/min: 0...42.28 gpm; Analogue end point AEP : 40...200 l/min: 10.28...52.84 gpm; Max. flow rate [l/min] : 220; In steps of : 0.1 l/min: 0.02 gpm; Dynamic response T05 / T09 [s] : T09 = 30 (Q > 20 l/min); (water); Response time [s] : 0.25; (dAP = 0); Damping for the switching output dAP [s] : 0...1; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PPS; Centellen 200; Process connection : threaded connection G 1 1/4 flat seal; Display unit : l/min; m³/h; gpm; gph; °C; °F; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x R 1, stainless steel, E40205 | adapter for pipe: 1 x 1" NPT, stainless steel, E40206

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...792.5 gph: 0...13.21 gpm; Display range : 0...951 gph: 0...15.86 gpm; Resolution : 1 gph: 0.02 gpm; Set point SP : 1...793 gph: 0.02...13.22 gpm; Reset point rP : 0...791 gph: 0...13.2 gpm; Analogue start point ASP : 0...637 gph: 0...10.62 gpm; Analogue end point AEP : 156...793 gph: 2.6...13.22 gpm; Max. flow rate : 951 gph: 15.86 gpm; In steps of : 1 gph: 0.02 gpm; Pulse value : 0.02...9000 * 10³ gal; In steps of : 0.02 gal; Pulse length [s] : 0,6...2; Dynamic response T05 / T09 [s] : T09 = 70 (Q > 1 gpm); (water); Response time [s] : 0.25; (dAP = 0); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; Ambient temperature [°F] : 14...140; Storage temperature [°F] : -13...176; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PES; Centellen 200; Process connection : threaded connection G 3/4 flat seal; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x 1/2" NPT, stainless steel, E40191 | adapter for pipe: 1 x 1/2" NPT, brass, E40154

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...3170 gph: 0...52.84 gpm; Display range : 0...3804 gph: 0...63.4 gpm; Resolution : 1 gph: 0.02 gpm; Set point SP : 7...3170 gph: 0.12...52.84 gpm; Reset point rP : 0...3163 gph: 0...52.72 gpm; Analogue start point ASP : 0...2547 gph: 0...42.46 gpm; Analogue end point AEP : 621...3170 gph: 10.36...52.84 gpm; Max. flow rate : 3804 gph: 63.4 gpm; In steps of : 1 gph: 0.02 gpm; Pulse value : 0.02...9000 * 10³ gal; In steps of : 0.02 gal; Pulse length [s] : 0,095...2; Dynamic response T05 / T09 [s] : T09 = 30 (Q > 5 gpm); (water); Response time [s] : 0.25; (dAP = 0); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; Ambient temperature [°F] : 14...140; Storage temperature [°F] : -13...176; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PPS; Centellen 200; Process connection : threaded connection G 1 1/4 flat seal; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x 1" NPT, stainless steel, E40206

Ultrasonic flow meter; Operating voltage [V] : 19...30 DC; (according to EN 50178 SELV/PELV); Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Inputs : counter reset; Total number of outputs : 2; Output signal : switching signal; analogue signal; pulse signal; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2; Permanent current rating of switching output DC [mA] : 250; (per output); Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (scalable); Max. load [Ω] : 500; Analogue voltage output [V] : 0...10; (scalable); Min. load resistance [Ω] : 2000; Pulse output : flow rate meter; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Measuring range : 0...50 l/min: 0...3 m³/h; Display range : 0...60 l/min: 0...3.6 m³/h; Resolution : 0.1 l/min: 0.005 m³/h; Set point SP : 0.1...50 l/min: 0.005...3 m³/h; Reset point rP : 0...49.9 l/min: 0...2.995 m³/h; Analogue start point ASP : 0...40 l/min: 0...2.4 m³/h; Analogue end point AEP : 10...50 l/min: 0.6...3 m³/h; Max. flow rate : 60 l/min: 3.6 m³/h; In steps of : 0.1 l/min: 0.005 m³/h; Pulse value : 0.1 l...1 000 000 m³; Pulse length [s] : 0,05...2; Dynamic response T05 / T09 [s] : T09 = 70 (Q > 5 l/min); (water); Response time [s] : 0.25; (dAP = 0); Delay time programmable dS, dr [s] : 0...50; Damping for the switching output dAP [s] : 0...1; Parameter setting options : Flow monitoring; quantity meter; Preset counter; Temperature monitoring; Ambient temperature [°C] : -10...60; Storage temperature [°C] : -25...80; Materials : housing: AlMgSi0,5 anodised; Sealing: FKM; PA 6.6; cover film: PA; Materials (wetted parts) : stainless steel (1.4404 / 316L); FKM; PES; Centellen 200; Process connection : threaded connection G 3/4 flat seal; Items supplied : sealings: 2, Centellen; Accessories (optional) : adapter for pipe: 1 x R1/2, stainless steel, E40178 | adapter for pipe: 1 x R1/2, brass, E40151

Vortex flow meter; Operating voltage [V] : 8...33 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Power-on delay time [s] : < 2; Total number of outputs : 1; Output signal : analogue signal; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (Q [l/min] = 0,938 x (I - 4 mA)); Max. load [Ω] : 0 °C: -30...85; Storage temperature [°C] : -30...85; Cavitation : P(absolute) discharge / P(difference) > 5.5 to avoid cavitation; Materials : PA 6T; Materials (wetted parts) : ETFE; PA 6T; EPDM; Tightening torque [Nm] : 12; Process connection : threaded connection G 1/2 DN8

Vortex flow meter with display; Operating voltage [V] : 18...30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 3; Total number of outputs : 2; Output signal : analogue signal; Number of analogue outputs : 2; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Short-circuit protection : yes; Overload protection : yes; Measuring range : 1...20 l/min: 0.06...1.2 m³/h; Display range : 0...24 l/min: 0...1.44 m³/h; Resolution : 0.1 l/min: 0.005 m³/h; Analogue start point ASP : 0...16 l/min: 0...0.96 m³/h; Analogue end point AEP : 4...20 l/min: 0.24...1.2 m³/h; In steps of : 0.1 l/min: 0.005 m³/h; Measuring dynamics : 1:20; Dynamic response T05 / T09 [s] : T09 = 6; Response time [s] : 1; (dAP = 0); Damping for the switching output dAP [s] : 0...5; Parameter setting options : Damping for the analogue output dAA; Display unit; Ambient temperature [°C] : 0...60; Note on ambient temperature : medium temperature < 80 °C | medium temperature < 90 °C: 0...50 °C; Storage temperature [°C] : -20...80; Materials : stainless steel (1.4404 / 316L); PC; PBT+PC-GF30; PPS; TPE-U; Materials (wetted parts) : stainless steel (1.4404 / 316L); ETFE; PA 6T; PPS; FKM; Tightening torque [Nm] : 30; Process connection : threaded connection G 1/2 DN8

Vortex flow meter; Operating voltage [V] : 8...33 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Power-on delay time [s] : < 2; Total number of outputs : 1; Output signal : analogue signal; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; (Q [l/min] = 0,625 x (I - 4 mA)); Max. load [Ω] : 0 °C: -30...85; Storage temperature [°C] : -30...85; Cavitation : P(absolute) discharge / P(difference) > 5.5 to avoid cavitation; Materials : PA 6T; Materials (wetted parts) : ETFE; PA 6T; EPDM; Tightening torque [Nm] : 12; Process connection : threaded connection G 1/2 DN6