VEX-ELIMECS company logo
Catalog>IFM>Process sensors>Flow sensors / flow meters>Ifm – SV5200
Previous Product

Ifm – SV5200

PROCESS SENSORS ⍾ Ifm – SV5200
Qty
Vortex flow meter with display; Operating voltage [V] : 18…30 DC; Min. insulation resistance [MΩ] : 100; (500 V DC); Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : < 3; Total number of outputs : 2; Output signal : switching signal; frequency signal; IO-Link; (configurable); Electrical design : PNP/NPN; Number of digital outputs : 2; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 100; Short-circuit protection : yes; Overload protection : yes; Measuring range : 2…40 l/min: 0.12…2.4 m³/h; Display range : 0…48 l/min: 0…2.88 m³/h; Resolution : 0.2 l/min: 0.01 m³/h; Set point SP : 2.4…40 l/min: 0.14…2.4 m³/h; Reset point rP : 2…39.6 l/min: 0.12…2.38 m³/h; Frequency end point, FEP : 8…40 l/min: 0.48…2.4 m³/h; In steps of : 0.2 l/min: 0.01 m³/h; Frequency at the end point FRP [Hz] : 100…1000; Measuring dynamics : 1:20; Dynamic response T05 / T09 [s] : T09 = 6; Response time [s] : 1; (dAP = 0); Damping for the switching output dAP [s] : 0…5; Parameter setting options : hysteresis / window; normally open / normally closed; switching logic; frequency output; switch-on/switch-off delay; Damping; Display unit; Communication interface : IO-Link; Transmission type : COM2 (38,4 kBaud); IO-Link revision : 1.1; SDCI standard : IEC 61131-9; Profiles : Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis; SIO mode : yes; Required master port type : A; Process data analogue : 2; Process data binary : 2; Min. process cycle time [ms] : 3; Supported DeviceIDs : Type of operation: DeviceID | Default: 488; Ambient temperature [°C] : 0…60; Note on ambient temperature : medium temperature < 80 °C | medium temperature < 90 °C: 0…50 °C; Storage temperature [°C] : -20…80; Materials : stainless steel (1.4404 / 316L); PC; PBT+PC-GF30; PPS; TPE-U; Materials (wetted parts) : stainless steel (1.4404 / 316L); ETFE; PA 6T; PPS; FKM; Tightening torque [Nm] : 30; Process connection : threaded connection G 1/2 DN10
ConnectionConnector: 1 x M12; Contacts: gold-plated
No. of inputs/outputsNumber of digital outputs: 2
Current consumption< 30 mA
Voltage supply24 V
DisplayDisplay unit: 6 x LED, green (l/min, mu00b3/h, gpm, gph, u00b0C, u00b0F) | measured values: alphanumeric display, 4-digit | programming: alphanumeric display, 4-digit
Degree of protectionIP 65; IP 67
Weight440 g
Dimensions104.5 x 32.5 x 113.6 mm
Search Icon Browse FLOW SENSORS / FLOW METERS catalog

Downloads

PDF
IFM SV5200 Datasheet PDF
Download
Next Product

Related in Flow sensors / flow meters ⍾ Page 10

Ifm – SI1100
Product details
SI1100 - Ifm
Flow monitor; Response time [s] : 1...10; Operating voltage [V] : 20...36 DC; (according to EN 50178 SELV/PELV); Reverse polarity protection : yes; Power-on delay time [s] : 15; (optically indicated); Total number of outputs : 1; Output signal : switching signal; Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 400; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Probe length L [mm] : 45; Temperature gradient [K/min] : 300; Adjustment of the switch point : pushbutton; Ambient temperature [°C] : -25...80; Thread designation : M18 x 1.5; Materials : PBT-GF20; Materials (wetted parts) : titanium (3.7035); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SI5004
Product details
SI5004 - Ifm
Flow monitor; Response time [s] : 1...10; Operating voltage [V] : 19...36 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 1; Output signal : analogue signal; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Overload protection : yes; Probe length L [mm] : 45; Repeatability [cm/s] : 1...5; Note on repeatability : for water 5...100 cm/s; 25 °C | Factory setting; Temperature drift [cm/s x 1/K] : 0.1; (for water 5...100 cm/s; 10...70 °C); Measuring error [% of the final value] : ± 2...± 10; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -25...100; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4301 / 304); PC; PBT-GF20; EPDM/X; Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SI5001
Product details
SI5001 - Ifm
Flow monitor; Response time [s] : 1...10; Operating voltage [V] : 19...36 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 1; Output signal : switching signal; Electrical design : NPN; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 250; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Probe length L [mm] : 45; Repeatability [cm/s] : 1...5; Note on repeatability : for water 5...100 cm/s; 25 °C | Factory setting; Temperature drift [cm/s x 1/K] : 0.1; (for water 5...100 cm/s; 10...70 °C); Temperature gradient [K/min] : 300; Switch point accuracy [cm/s] : ± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting); Hysteresis [cm/s] : 2...5; (for water 5...100 cm/s; 25 °C; Factory setting); Adjustment of the switch point : pushbutton; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -25...100; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X; Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SI500A
Product details
SI500A - Ifm
Flow monitor; Response time [s] : 1...10; Operating voltage [V] : 19...36 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 1; Output signal : switching signal; Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 250; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Probe length L [mm] : 45; Repeatability [cm/s] : 1...5; Note on repeatability : for water 5...100 cm/s; 25 °C | Factory setting; Temperature drift [cm/s x 1/K] : 0.1; (for water 5...100 cm/s; 10...60 °C); Temperature gradient [K/min] : 300; Switch point accuracy [cm/s] : ± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting); Hysteresis [cm/s] : 2...5; (for water 5...100 cm/s; 25 °C; Factory setting); Adjustment of the switch point : pushbutton; Ambient temperature [°C] : -20...60; Storage temperature [°C] : -25...100; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X; Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SF5350
Product details
SF5350 - Ifm
Flow sensor for connection to an evaluation unit; Connection to control monitor : VS3000; Probe length L [mm] : 45; Setting range [cm/s] : 3...300; Greatest sensitivity [cm/s] : 3...60; Setting range [cm/s] : 200...3000; Greatest sensitivity [cm/s] : 200...800; Temperature gradient [K/min] : 300; Response time [s] : 1...10; Housing : for adapter; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SF5300
Product details
SF5300 - Ifm
Flow sensor for connection to an evaluation unit; Setting range [cm/s] : 3...300; Greatest sensitivity [cm/s] : 3...60; Setting range [cm/s] : 200...3000; Greatest sensitivity [cm/s] : 200...800; Connection to control monitor : VS3000; Probe length L [mm] : 45; Temperature gradient [K/min] : 300; Response time [s] : 1...10; Housing : for adapter; Thread designation : M18 x 1.5; Materials : Lock nut: stainless steel; Cable gland: FKM; nut for cable gland: brass nickel-plated; Sleeve: brass nickel-plated; Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SF620A
Product details
SF620A - Ifm
Flow sensor for connection to an evaluation unit; Response time [s] : 1...10; Connection to control monitor : VS2000 Exi (PTB 01 ATEX 2075); Probe length L [mm] : 15...156; Temperature gradient [K/min] : 15; Ambient temperature [°C] : -20...70; Max. internal capacitance [nF] : 0.4; Max. internal inductance [µH] : 2; Temperature class : T4; Materials : stainless steel (1.4404 / 316L) several parts, welded; Materials (wetted parts) : stainless steel (1.4404 / 316L) several parts, welded; Process connection : Ø 10 mm; Accessories (optional) : Clamp adapter: R 1/2, E40160 | Clamp adapter: 1/2" NPT, E40174
Ifm – SI0553
Product details
SI0553 - Ifm
Flow monitor; Response time [s] : 1...2; (for a temperature gradient: 1 K/min); Response time [s] : 1...10; Operating voltage [V] : 19...36 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 1; Output signal : switching signal; Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 250; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Probe length L [mm] : 45; Repeatability [cm/s] : 1...5; Note on repeatability : for water 5...100 cm/s; 25 °C | Factory setting; Temperature drift [cm/s x 1/K] : 0.1; (for water 5...100 cm/s; 10...70 °C); Temperature gradient [K/min] : 300; Switch point accuracy [cm/s] : ± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting); Hysteresis [cm/s] : 2...5; (for water 5...100 cm/s; 25 °C; Factory setting); Adjustment of the switch point : pushbutton; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -25...100; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X; Materials (wetted parts) : Hastelloy C-4 (2.4610); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SI0558
Product details
SI0558 - Ifm
Flow monitor; Response time [s] : 1...2; (for a temperature gradient: 1 K/min); Response time [s] : 1...10; Operating voltage tolerance [%] : -15...15; Operating voltage [V] : < 24 AC / 18...36 DC; (to SELV/PELV); Protection class : III; Power-on delay time [s] : 10; Total number of outputs : 1; Output signal : switching signal; Number of digital outputs : 1; Output function : normally open; Contact rating : 2 A, 24 V AC/DC; (to SELV/PELV); Short-circuit protection : no; Overload protection : no; Probe length L [mm] : 45; Repeatability [cm/s] : 1...5; Note on repeatability : for water 5...100 cm/s; 25 °C | Factory setting; Temperature drift [cm/s x 1/K] : 0.1; (for water 5...100 cm/s; 10...70 °C); Temperature gradient [K/min] : 300; Switch point accuracy [cm/s] : ± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting); Hysteresis [cm/s] : 2...5; (for water 5...100 cm/s; 25 °C; Factory setting); Adjustment of the switch point : pushbutton; Ambient temperature [°C] : -25...60; Storage temperature [°C] : -25...100; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X; Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SI0555
Product details
SI0555 - Ifm
Flow monitor; Response time [s] : 1...10; Operating voltage tolerance [%] : > -10; Operating voltage [V] : 48 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 1; Output signal : switching signal; Electrical design : PNP; Number of digital outputs : 1; Output function : normally open / normally closed; (parameterisable); Max. voltage drop switching output DC [V] : 2.5; Permanent current rating of switching output DC [mA] : 250; Short-circuit protection : yes; Type of short-circuit protection : pulsed; Overload protection : yes; Probe length L [mm] : 45; Repeatability [cm/s] : 1...5; Note on repeatability : for water 5...100 cm/s; 25 °C | Factory setting; Temperature drift [cm/s x 1/K] : 0.1; (for water 5...100 cm/s; 10...70 °C); Temperature gradient [K/min] : 300; Switch point accuracy [cm/s] : ± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting); Hysteresis [cm/s] : 2...5; (for water 5...100 cm/s; 25 °C; Factory setting); Adjustment of the switch point : pushbutton; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -25...100; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X; Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SI0551
Product details
SI0551 - Ifm
Flow monitor; Operating voltage [V] : 19...36 DC; Protection class : III; Reverse polarity protection : yes; Power-on delay time [s] : 10; Total number of outputs : 1; Output signal : analogue signal; Number of analogue outputs : 1; Analogue current output [mA] : 4...20; Max. load [Ω] : 500; Overload protection : yes; Probe length L [mm] : 45; Flow range [cm/s] : 3...250; Greatest sensitivity [cm/s] : 3...100; Repeatability [cm/s] : 1...5; Note on repeatability : for water 5...100 cm/s; 25 °C | Factory setting; Temperature drift [cm/s x 1/K] : 0.1; (for water 5...100 cm/s; 10...70 °C); Response time [s] : 1...10; Ambient temperature [°C] : -25...80; Storage temperature [°C] : -25...100; Thread designation : M18 x 1.5; Materials : stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X; Materials (wetted parts) : stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread
Ifm – SF5702
Product details
SF5702 - Ifm
Flow sensor for connection to an evaluation unit; Connection to control monitor : VS3000; Probe length L [mm] : 93; Setting range [cm/s] : 3...300; Greatest sensitivity [cm/s] : 3...60; Setting range [cm/s] : 200...3000; Greatest sensitivity [cm/s] : 200...800; Temperature gradient [K/min] : 300; Response time [s] : 1...10; Storage temperature [°C] : -25...80; Housing : for adapter; Thread designation : M18 x 1.5; Materials : titanium (3.7035); EPDM; ULTEM; Materials (wetted parts) : titanium (3.7035); O-ring: FKM 80 Shore A; Process connection : M18 x 1,5 internal thread