Phoenix Contact – IFS-OP-CRADLE

Loop-powered isolators - MACX MCR-SL-I-I-ILP - 2905278; Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Screw connection technology.

Loop-powered isolators - MACX MCR-SL-I-I-ILP-SP - 2905279; Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection technology.

Cable set - TC-C-PTB3-SC-SET1 - 2905216; Cable set for TC-MACX-MCR-PTB power and fault signaling module (Order No. 2904673), for use on the Termination Carrier for signal conditioners from the MACX Analog Ex series.

Cable set - TC-C-MAX2-SC-31322122 - 2904674; Cable set for signal transmission on the Termination Carrier for two-channel modules or modules with double output from the MACX Analog Ex series. Connection of terminal points 3.1 and 3.2 as well as 2.1 and 2.2 (signal transmission) to the signal PCB.

Cable set - TC-C-MAX2-SC-32220000 - 2904446; Cable set for signal transmission and power supply on the Termination Carrier for signal conditioners from the MACX Analog Ex series. Connection of terminal points 3.2 and 2.2 (signal transmission for active input cards) to the signal PCB.

Signal isolator - MACX MCR-SL-RPSS-2I-2I - 2904089; 2-channel repeater power supply for operating 2-wire measuring transducers, input: 4…20 mA (powered), output: 4…20 mA (active), bidirectional transmission of digital HART communication signals, screw connection, SIL, PL.

Signal isolator - MACX MCR-SL-RPSS-2I-2I-SP - 2904090; 2-channel repeater power supply for the operation of 2-conductor measuring transducers, input: 4... 20 mA (powered), output: 4…20 mA (active), bidirectional transmission of digital HART communication signals, Push-in connection, SIL, PL.

Repeater power supply - MACX MCR-SL-RPSSI-I-UP - 2865968; Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range power supply, SIL, screw connection

Power/input isolating amplifier - MACX MCR-SL-RPSSI-I - 2865955; Repeater power supply and input isolating amplifier, HART. Transfers supplied or active 0/4 - 20 mA signals to a load (active or passive). 3-way electrical isolation, SIL 2 according to IEC 61508.

Isolation amplifier - MACX MCR-SL-NAM-R - 2865997; NAMUR signal conditioners for operating proximity sensors and switches. The signals are transmitted to the control level via relay output (changeover contact). Line fault detection (LFD), 3-way electrical isolation, SIL 2, with screw connection.

Output signal conditioner - MACX MCR-SL-IDSI-I - 2865971; Output signal conditioner, HART. Isolates and transfers 0/4-20 mA signals to a load (I/P converters, control valves, displays). Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, screw connection.

Power and error message module - MACX MCR-PTB - 2865625; Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector