Phoenix Contact – MINI MCR-SL-PT100-LP-NC-SP

Setpoint adjuster - EMG 30-SPK-10K LIN - 2942137; Cascading setpoint value potentiometer, for selecting presettable setpoints via a 24 V control signal, resistance value 10 kΩ

Setpoint adjuster - EMG 30-SP-10K LIN - 2942124; Setpoint value potentiometer, to set setpoints individually, resistance value 10 kΩ

Setpoint adjuster - EMG 30-SP- 4K7LIN - 2940252; Setpoint value potentiometer, to set setpoints individually, resistance value 4,7 kΩ

Output signal conditioner - MINI MCR-SL-IDS-I-I-SP - 2905578; 3-way output signal conditioner for transmitting 0/4 ... 20 mA signals from the controller to a load located in the field with simultaneous 3-way electrical isolation, with spring-cage connection. Replacement part: 2905577 MINI MCR-SL-IDS-I-I.

Output signal conditioner - MINI MCR-SL-IDS-I-I - 2905577; 3-way output signal conditioner for transmitting 0/4 ... 20 mA signals from the controller to a load located in the field with simultaneous 3-way electrical isolation between the input, output, and supply, with screw connection

Cable set - TC-C-2MIN-AI-05061516 - 2905224; Cable set for signal transmission on the termination carrier for modules from the MINI Analog series. Connection of terminal points 5 and 6 of two adjacent MINI Analog modules to the signal PCB via a 4-pos. PTSM connector.

Cable set - TC-C-PTB1-AI-SET1 - 2905217; Cable set for MINI MCR-SL-PTB-FM power module (Order No. 2902958) and MINI MCR-SL-FM-RC-NC error message module (Order No. 2902961), for use on the termination carrier for modules from the MINI Analog series.

Cable set - TC-C-PTB1-SC-05061516 - 2903387; Cable set for MINI MCR-SL-PTB power module (Order No. 2864134) and MINI MCR-SL-TB feed-through module (Order No. 2811420), for use on the termination carrier for modules from the MINI Analog series.

Monitoring module - MINI MCR-SL-FM-RC-SP-NC - 2902962; The fault monitoring module is used to evaluate and report group errors from the fault monitoring system and monitor supply voltages. Spring-cage connection, standard configuration. Replacement part: 2904508 MINI MCR-2-FM-RC-PT.

Power terminal block - MINI MCR-SL-PTB-FM-SP - 2902959; The MINI MCR-SL-PTB-FM(-SP) feed-in terminal is used to feed in the supply voltage to the DIN rail connector. The FM feed-in terminal offers an additional function: monitoring. Spring-cage connection. Replacement part: 2902067 MINI MCR-2-PTB-PT.

Power terminal block - MINI MCR-SL-PTB-FM - 2902958; The MINI MCR-SL-PTB-FM(-SP) power terminal block is used to supply the supply voltage to the DIN rail connector. The FM power terminal block offers the additional function of monitoring in combination with the fault monitoring module. Screw connection.

Monitoring module - MINI MCR-SL-FM-RC-NC - 2902961; The fault monitoring module is used to evaluate and report group errors from the fault monitoring system and to monitor the supply voltages. The error is reported via an N/O contact. Screw connection, standard configuration.