Pilz – 8176724

Drive-based motion control system With expansion card PMCprimo C; Standard bus system: CANopen, PROFIBUS Software option: none;; Technical data at 3 x 400 V AC: Continuous output current: 6 A; Imax; (2 s) = 18 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 4.5 kVA; Integral brake resistor; CAN/CAN adapter included in delivery;

Drive-based motion control system With expansion card PMCprimo C; Standard bus system: CANopen, PROFIBUS; Software option: none;; Technical data at 3 x 400 V AC: Continuous output current: 3 A;; Imax (2 s)= 9 A; Imax (5 s)= 6 A; power consumption in S1 operation: 2.2; kVA; Integral brake resistor; CAN/CAN adapter included in delivery;

Drive-based motion control system with expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/Profibus; Software option: Dynamic curve calulation, IEC 61131-3 programming, EtherCat; Technical; data at 3 x 400 V AC: Continuous output current: 12 A, Imax (5 s)= 24 A;; power consumption in S1 operation: 9 kVA; Integral brake resistor and; mains filter; CAN/CAN adapter included in delivery.

Replacement connector for the controller card PMCprimo C at the; interface X40.

Drive-based motion control system with expansion card PMCprimo C2;; Standard bus system: Configurable CANopen/Profibus; Software option: none;; Technical data at 3 x 400 V AC: Continuous output current: 6 A; Imax; (2 s) = 18 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 4.5 kVA; Integral brake resistor; CAN/Profibus adapter included in delivery;

Suitable for the device series PMCprimo C2 consisting of: X40a, X40b

Adapter cable for encoder; Cable assembled on both sides: mini-I/O ; SUBD9; No. of wires and cross section: 4x2x0,14mm²; suitable for; PMCprimo C2 and PMCpimo MC; Length 0,75m;

Cable assembled on both sides, Connector Sub-D9 male connector; Sub-D9 female CAN network, length: 0.25 m.

Cable assembled on both sides, Connector Sub-D9 male connector; Sub-D9 female CAN network, length: 0.7 m.