Siemens – 6DR4004-8S

MOUNTING SET FOR SIPART PS2 ELECTROPNEUMATIC POSITIONER MOUNTING ON LINEAR ACTUATORS CONSTING OF A SHORT LEVER (COMPLETE MOUNTED) AND PICK- UP BRACKET, CLAMPING PIECES (ALUMINIUM) ASSEMBLY AND SCREWS. STRAKE RANGES: 2MM-35MM, OTHER METAL PARTS VA-STEEL.

Mounting kit for SIPART PS 2

MOUNTING SET FOR SIPART PS2 ELECTROPNEUMATIC POSITIONER MOUNTING ON LINEAR ACTUATORS CONSISTING OF A LONG LEVER (COMPLETE MOUNTED) AND PICK- UP BRACKET, CLAMPING ASSEMBLY AND SCREWS. STRAKE RANGES: 30MM-130MM METAL PARTS VA-STEEL.

NCS-sensor for SIPART PS2 for non-contacting detection of position without explosion-proof . Cable length 20m (65.67 ft) for part-turn actuators magnetholder out of anodized aluminium / -40 ... +85 deg C (-40 ... +185 deg F) (Mounting console 6DR4004-(1/2/3/4)D must be ordered separately) Manual in german and english

NCS-sensor for SIPART PS2 for non-contacting detection of position without explosion-proof . Cable length 20m (65.67 ft) for linear actuators > 14mm Manual in german and english

NCS-sensor for SIPART PS2 for non-contacting detection of position without explosion-proof . Cable length 6 m (19.68 ft) for linear actuators > 14mm Manual in german and english

MECHANICAL LIMIT SWITCH MODULE, WITH GALVANICAL SWITCH CONTACTS, FOR ELECTROPNEUMATIC POSITIONER SIPART PS2, TO RETROFIT, 1 FAULT OUTPUT, NOT EXPLOSION PROOF Not suitable for natural gas operation!

Mounting console, stainless steel 316L, robust design to support extended loads like e.g.SIPART PS2 in an explosion proof stainless steel 316L enclosure or as a variant with the booster. The console gets mounted and therefore supported by both stands of the actuator.

NCS-sensor for SIPART PS2 for non-contacting detection of position without explosion-proof . Cable length 40m (131.23ft) for part-turn actuators magnetholder out of anodized aluminium / -40 ... +85 deg C (-40 ... +185 deg F) (Mounting console 6DR4004-(1/2/3/4)D must be ordered separately) Manual in german and english

NCS-sensor for SIPART PS2 for non-contacting detection of position without explosion-proof . Cable length 6 m (19.68 ft) for linear actuators up to 14mm (mounted with individual mounting solution) Manual in german and english

NCS-sensor for SIPART PS2 for non-contacting detection of position without explosion-proof . Cable length 6 m (19.68 ft) for part-turn actuators magnetholder out of anodized aluminium / -40 ... +85 deg C (-40 ... +185 deg F) (Mounting console 6DR4004-(1/2/3/4)D must be ordered separately) Manual in german and english

Iy module plug-in module for analog current output signal for SIPART PS2 electropneumatic positioner, position feedback, signal current 4-20 mA, simple to retrofit, not explosion-proof