Siemens – 6MD2318-4MA04

Device adaptor for SICAM FSI mounting via hot stick (telescopic)

DIRECTIONAL SHORT CIRCUIT AND EARTHFAULT DETECTOR FOR LOW-POWER SENSORS MEDIUMVOLTAGEMONITORING FOR VALUES OF U,I,P,Q,S,F,COS PHI COMMUNICATION MODBUS RTU POWER SUPPLY DC24-60V / AC230V

DIRECTIONAL SHORT CIRCUIT AND EARTH FAULT DETECTOR VOLTAGE MEASUREMENT VIA RESISTIVE VOLTAGE DIVIDER, CONVENTIONAL VT OR 230V DIRECT FOR LV APPLICATIONS FOR LOW-POWER CURRENT SENSORS 1 BINARY INPUT 2 BINARY OUTPUTS MEASUREMENT/CALCULATION OF VALUES U,I,P,Q,S,F,COS PHI ENERGY COUNTER COMMUNICATION MODBUS RTU POWER SUPPLY DC24-110V / AC230V

LOW-POWER VOLTAGE SENSOR ACCORDING TO IEC 61869-11 RATIO: 3,25V/-/3' @ 20KV/-/3' FOR T-CONNECTOR WITH C-CONE ACCURACY CLASS: 0.5 (FCM V 3.30 ONWARDS), ELSE 1 INSULATION LEVEL: 24/50/125KV VOLTAGE FACTOR: 1,2*UN AND 1,9*UN FOR 8H WITH CONNECTION CABLE 2.0 M OPEN END

LOW-POWER VOLTAGE SENSOR 3,25 VOLT / RADICAL 3 AT 10 KV / RADICAL 3 ACCORDING IEC60044-7 FOR T-CONNECTOR WITH C-CONE

SIGNALCONVERTER FOR SICAM FCM 3 CURRENT INPUTS 1A IN 225MV LOW-POWER SIGNAL USFULL FOR 3 PHASE SENSORS OR 2 PHASE SENSORS AND 1 CORE BALLANCE SENSOR

SICAM FCG WITH ANTENNAS

SICAM FSI: LED,COMMUNICABLE

NON DIRECTIONAL EARTH FAULT INDICATOR, WITH LED INDICATION, DUAL POWERED WITH AUXILIARY SUPPLY : AC 110 - 230V ±20%, DC 12-24V ±20% AND INTERNAL BATTERY WITH 2 BINARY OUTPUTS, 3 BINARY INPUTS INCLUDING 1 GROUND CURRENT SENSOR (TYPE 2) 25A-250A , DIAMETER : 90-140mm 10% ACCURACY WITH 16M SENSOR WIRE

LOW-POWER PHASE CURRENT SENSOR SPLIT CORE TYPE ACCORDING TO IEC 61869-10 RATIO: 225 MV@300 A INNER DIAMETER 65MM ACCURACY CLASS: 0.5 (FCM V 3.30 ONWARDS), ELSE 1 PROTECTION CLASS: 5P10 EXTENSION 200% WITH CONNECTION CABLE 2.0 M OPEN END

LOW-POWER EARTH CURRENT SENSOR SPLIT CORE TYPE ACCORDING TO IEC 61869-10 RATIO: 225 MV@60 A INNER DIAMETER 160MM ACCURACY CLASS: 1 (FCM V 3.30 ONWARDS), ELSE 3 PROTECTION CLASS: 5P10 WITH CONNECTION CABLE 2.0 M OPEN END