Siemens – 6MD9000-0CB00-1AA3

SICAM PCC V3.0-PROTOCOL DRIVER IEC 60870-5-103 MASTER REQUIRED FOR COUPLING OF PROTECTION RELAYS AND COMBINED CONTROL, MONITORING AND PROTECTION DEVICES. ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODULE "FULL SERVER OR "DIP" POSSIBLE. RELEASED DEVICES AND FUNCTIONALITIES ARE DOCUMENTED IN THE PTD PA INTRANET

SICAM PAS / PQS V8.1-OPTION IEC 61850 (CLIENT) FOR COMMUNICATIONS WITH BAY CONTROL UNITS AND PROTECTION RELAYS. ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PAS / PQS BASE MODULE "FULL SERVER" OR "DIP" POSSIBLE

SICAM PCC V2.0-PROTOCOL DRIVER FOR IEC 60870-6 TASE.2 (ICCP) THIS PROTOCOL IS USED FOR NETWORKING VIA LAN/WAN SUPPORTED BLOCKS ARE 1/2/5/8 SICAM PCC CAN BE USED AS TASE.2 CLIENT, SERVER OR CLIENT AND SERVER. AUTOM.EXCHANGE OF CONFIGURATION DATA BETWEEN SERVER AND CLIENT ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODULE "FULL SERVER" POSSIBLE.

SICAM PAS / PQS V8.1-OPTION MODBUS (MASTER) FOR CONNECTING IEDS AND SUB-DEVICES. (SERIELL & OVER IP) ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PAS / PQS BASE MODULE "FULL SERVER" OR "DIP" POSSIBLE

SICAM PCC DRIVER FOR PROFIBUS DP MASTER ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODUL POSSIBLE RELEASED DEVICES AND FUNCTIONALITIES ARE DOCUMENTED IN THE EVS INTRANET. PROFIBUS DP HW AND SW MUST BE ORDERED SEPARAT. FR.SIEMENS A&D

SICAM PAS / PQS V8.1-OPTION IEC 60870-5-103 (MASTER) FOR CONNECTING PROTECTION UNITS/BAY CONTROL UNITS ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PAS / PQS BASE MODULE "FULL SERVER" OR "DIP" POSSIBLE

SICAM PCC V2.0-PROTOCOL DRIVER IEC 60870-5-103 MASTER REQUIRED FOR COUPLING OF PROTECTION RELAYS AND COMBINED CONTROL, MONITORING AND PROTECTION DEVICES. ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODULE "FULL SERVER OR "DIP" POSSIBLE. RELEASED DEVICES AND FUNCTIONALITIES ARE DOCUMENTED IN THE PTD PA INTRANET

SICAM PCC PROTOCOL DRIVER SEABUS + MASTER REQUIRED FOR COUPLING DEVICES FROM THE SYSTEM ACCESS (POWER METER, ISGS PROT. RELAY) ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODULE POSSIBLE RELEASED DEVICES AND FUNKTIONALITIES ARE DOCUMENTED IN THE EVS INTRANET

SICAM PCC V2.0 PROTOCOL DRIVER SEABUS + MASTER REQUIRED FOR COUPLING DEVICES FROM THE SYSTEM ACCESS (POWER METER, ISGS PROT. RELAY) ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODULE "FULL SERVER" OR "DIP" POSSIBLE. RELEASED DEVICES AND FUNKTIONALITIES ARE DOCUMENTED IN THE PTD PA INTRANET

SICAM PCC - PROTOCOL DRIVER COOPER 2179 MASTER ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODULE POSSIBLE RELEASED DEVICES AND FUNCTIONALITIES ARE DOCUMENTED IN THE EVS INTRANET

SICAM PCC V3.0 DRIVER FOR PROFIBUS DP MASTER ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PCC BASE MODUL "FULL SERVER" OR "DIP" POSSIBLE. RELEASED DEVICES AND FUNCTIONALITIES ARE DOCUMENTED IN THE PTD PA INTRANET. PROFIBUS DP HW AND SW MUST BE ORDERED SEPARAT. FR.SIEMENS A&D

SICAM PAS / PQS V8.1-OPTION POST DISTURBANCE REVIEW (PDR) FOR EVENT TRIGGERED SAMPLING OF MEASURED VALUES AND INDICATIONS. ORDER NOTE: ORDERING ONLY TOGETHER WITH THE SICAM PAS / PQS BASE MODULE "FULL SERVER" OR "DIP" POSSIBLE