VEX-ELIMECS company logo
Catalog>ABB

ABB

[siemens_summary]
[catalog_children]
[catalog_search_products]
ABB

ABB

Items 7297 - 7308 of 52161 ⍾ Last modified Aug 28, 2025
Circuit Breakers Control products Drives Electric Vehicle Infrastructure Enclosed Switches Enclosures Fusegear Home and Building Automation Industrial Automation Industrial Plugs and Sockets Installation Materials Installation products Lightning Protection Modular DIN Rail Products Motors and Generators StandAlone Electronics Switches Wire Management and Connectivity

ABB ⍾ Page 609

1…607608609610611…4,347
Abb – 2TKA140009G1
Product detailsAdd to RFQ
2TKA140009G1 - Abb
The round, dual-component connection box AP7.1 (2,5 mm², 440 V) is equipped with 10 membrane cable entries (17 mm) and two in the bottom. The cover of the box is equipped with three membrane seals (one Ø 20mm and two Ø 16mm) and with three strain-reliefs.
Abb – 2TKA140007G1
Product detailsAdd to RFQ
2TKA140007G1 - Abb
Square junction box AP6 is spacious and easy to wire. The box is equipped with an insulated 5-way connector. The transparent wire connector makes it easy to ensure sufficient wire depth. Max. wire capacity per connector is 4 x 2,5 mm² or 6 x 1,5 mm². The box has 8 knock-outs, 2 of which are in the bottom. Made of...
Abb – 2TKA140005G1
Product detailsAdd to RFQ
2TKA140005G1 - Abb
Junction box IP20 without connector.
Abb – 2TKA140003G1
Product detailsAdd to RFQ
2TKA140003G1 - Abb
The square junction box AP10/G (6,0 mm², 500 V) is equipped with 12 membrane cable entries (Ø 19 mm) in the sides, and two on the bottom. Cables are easy to connect by simply inserting the stripped ends through the inlets. The box locks by snapping and can be opened by inserting a screwdriver (for example) into the opening slots...
Abb – 2TKA140008G1
Product detailsAdd to RFQ
2TKA140008G1 - Abb
The round junction box AP7 (2,5 mm², 440 V) is similar to the AP9 and the AP10 and is equipped with 10 membrane cable entries (Ø 17 mm) and two in the bottom. Cables are easy to connect by simply inserting the stripped ends through the inlets. The cover is locked with two screws at distance of 78 mm. The...
Abb – 2TKA130043G1
Product detailsAdd to RFQ
2TKA130043G1 - Abb
The PMR410 is 28 mm deep and is designed for use in, for example, brick walls.
Abb – 2TKA130045G1
Product detailsAdd to RFQ
2TKA130045G1 - Abb
The PMR490 interconnector is used to link together mounting boxes when groups of installation boxes that house weak and strong current circuits are installed under different coverplates. The centerplate distance of mounting boxes can be set at 85 mm when using a PMR490 interconnector. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130046G1
Product detailsAdd to RFQ
2TKA130046G1 - Abb
The connecting piece PMR502 is used when low-voltage or strong-current circuit box groups are installed under different cover plates. With connecting piece PMR502, the distance between box centers is 100 mm. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130044G1
Product detailsAdd to RFQ
2TKA130044G1 - Abb
Low mounting boxes may be joined side by side by using a PMR474 interconnector, which must be cut to the height of the bottom of the box. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130031G1
Product detailsAdd to RFQ
2TKA130031G1 - Abb
The characteristics of this box are the same as the AU3.2; the difference is in the inlets. The box has 2 branch inlets for D20 conduits. There are also 3 knock-out on the side, and 2 on the bottom. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670
Abb – 2TKA130042G1
Product detailsAdd to RFQ
2TKA130042G1 - Abb
The PMR399 is 60 mm deep and is often used in renovating old houses, when adding 50 mm thermal insulation to inside walls while leaving existing conduit installations in place. The extension ring is attached to the old mounting box so as to extend it to the level of the new boarding.
Abb – 2TKA130030G1
Product detailsAdd to RFQ
2TKA130030G1 - Abb
The device offers the AU3.2 mounting box modified with a 28 mm deep extension ring for use in walls built of bricks that have pipe ducts. No branch inlets are required at the bottom of the box - straight access makes wire laying easier. There is no need to bend the conduits. Made of halogen free material (IEC/61249-2-21) and fulfills...