VEX-ELIMECS company logo
Catalog>ABB>Installation Materials>Flush Mounted Boxes>Accessories for Plastic Flush Mounted Boxes
[siemens_summary]
[catalog_children]
[catalog_search_products]
Accessories for Plastic Flush Mounted Boxes

Accessories for Plastic Flush Mounted Boxes

Items 25 - 36 of 56 from ABB ⍾ Last modified Aug 29, 2025
▲ Box Covers Box Support Extension Rings Inlets Other Accessories Strain Relief

Accessories for Plastic Flush Mounted Boxes ⍾ Page 3

12345
Abb – 2TKA130044G1
Product detailsAdd to RFQ
2TKA130044G1 - Abb
Low mounting boxes may be joined side by side by using a PMR474 interconnector, which must be cut to the height of the bottom of the box. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130042G1
Product detailsAdd to RFQ
2TKA130042G1 - Abb
The PMR399 is 60 mm deep and is often used in renovating old houses, when adding 50 mm thermal insulation to inside walls while leaving existing conduit installations in place. The extension ring is attached to the old mounting box so as to extend it to the level of the new boarding.
Abb – 2TKA130040G1
Product detailsAdd to RFQ
2TKA130040G1 - Abb
If necessary, the box AU17.2 may be divided in two by using partition plate PMR345.
Abb – 2TKA130004G1
Product detailsAdd to RFQ
2TKA130004G1 - Abb
The junction box height can be increased by 13 mm by means of the AK7 extension ring. Screw distance c/c 78 mm.
Abb – 2TKA130003G1
Product detailsAdd to RFQ
2TKA130003G1 - Abb
The AK17 extension ring is 13 mm deep, and is used to modify the AU17.2 mounting.
Abb – 2TKA130002G1
Product detailsAdd to RFQ
2TKA130002G1 - Abb
The AK14 extension ring is used to change the depth of the AU8 and AU19 junction boxes, so that conduiting can take place above the concrete reinforcement. It gives a 75 mm space between the top level of the cast and the conduits; the AU19 gives a space of 67 mm.
Abb – 2TKA130008G1
Product detailsAdd to RFQ
2TKA130008G1 - Abb
The AS15 is designed to be used as a connector between AUS15.2 mounting boxes. Open needed knock-out holes on mounting boxes for the interconnector and install the boxes on the wall (board). Mount the interconnector in place from the inside of a box, to create a route for wires between boxes. Note
Abb – 2TKA130015G1
Product detailsAdd to RFQ
2TKA130015G1 - Abb
Wall clamps offer a rapid means of attaching a mounting box to a 12-13 mm thick board wall. Wall clamp AS8.13 is available for 12 - 13 mm. The hole is made with an AT5 hole saw (Ø 74 mm), and the board clamps are placed on either side of the board. The box is pushed through the hole from...
Abb – 2TKA130005G1
Product detailsAdd to RFQ
2TKA130005G1 - Abb
The AS12 strain-relief inlet is used in conduitless flush mounting to fasten 5 x 2,5 mm² cables to the mounting boxes or junction boxes. The boxes are installed in the standard way in the board or other structure. (Conduitless flush mounting is acceptable in hollow structures under special circumstances). Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130001G1
Product detailsAdd to RFQ
2TKA130001G1 - Abb
The AK13 is a smooth conversion cover designed for situations when flush mounting is converted to surface mounting. The cover has 8 knock-outs and is delivered with screws. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA002744G1
Product detailsAdd to RFQ
2TKA002744G1 - Abb
It is possible to raise the appliance up to 10 mm by using longer PLP5 screws. The screws fit all standard mounting boxes.
Abb – 2TKA002742G1
Product detailsAdd to RFQ
2TKA002742G1 - Abb
Appliances are attached directly to the box, using self-tapping PLP4 screws. The screws fit all standard mounting boxes.