Baumer

Solid shaft with clamping or synchro flange; Encoder singleturn / parallel; Optical sensing method; Clamping or synchro flange; Encoder with capped gray code; Short-circuit proof push-pull outputs; Output release by enable signal

Blind hollow shaft ø16 mm; Low response time; Open circuit voltage 20...60 mV per rpm; Blind hollow shaft ø16 mm; High signal quality due to patented LongLife technology; Connector output; No auxiliary energy source required

Blind hollow shaft up to ø15 mm; Encoder multiturn / SSI; Optical sensing method; Resolution: singleturn 14 bit, multiturn 12 bit; Blind hollow shaft ø12...ø15 mm; Electronic setting of zero point; Counting direction input; Suitable for high positive, negative accelerations; Available with additional incremental output; Maximum resistant against magnetic fields

Blind hollow shaft up to ø15 mm; Encoder singleturn / bus cover; Optical sensing method; Resolution: 13 bit; Blind hollow shaft ø12...15 mm; Extreme compact design; CANopen®/DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI; Code continuity check optional by bus; Maximum resistant against magnetic fields

Blind hollow shaft up to ø15 mm; Encoder singleturn / SSI; Optical sensing method; Resolution: 14 bit; Blind hollow shaft ø12...ø15 mm; Electronic setting of zero point; Counting direction input; Suitable for high positive, negative accelerations; Available with additional incremental output

Solid shaft with clamping or synchro flange; Encoder singleturn / bus cover; Optical sensing method; Resolution: 13 bit; Clamping or synchro flange; CANopen®/DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI; Code continuity check optional by bus; Maximum resistant against magnetic fields

2-dimensional, measuring range up to ±60°; Size 48 mm; Interface Analog; MEMS capacitive measuring principle; Measuring range 2-dimensional: up to ±60°; Aluminium housing; Protection IP 67/IP 69K; Connection cable; Teach input for adjustment of zero position

Measuring range ±15°, ±30°, ±60°, 360°; Inclination sensor / CANopen® / Profibus; Measuring range two-dimensional: ±15°, ±30°, ±60°; Measuring range one-dimensional: 360°; Resolution: 0.001° to 1°; Accuracy: ±0.1° to 0.2°; Programmable parameters; Protection max. IP 67

Solid shaft ø11 mm with EURO flange B10; Open circuit voltage 10...60 mV per rpm; Solid shaft ø11 mm; EURO flange B10; High signal quality due to patented LongLife technology; Temperature compensation of tacho voltage as standard; Low moment of inertia; No auxiliary energy source required

Solid shaft ø11 to ø14 mm with flange; Low response time; Open circuit voltage 40...175 mV per rpm; Redundant output (GMPZ); Solid shaft ø11...14 mm; High signal quality due to patented LongLife technology; With own bearings

Safety motion monitor with SIL3 and PLe certification; SIL3 and PLe certification; Monitoring of underspeed, overspeed, standstill and rotating direction; Inputs for 1 SinCos encoder (SIL3/PLe) and 2 HTL/PNP control signals; Safety related outputs; Mounting to 35 mm DIN rail (according to EN 60715); USB interface for simple parametrization by the OS 6.0 operator surface

1-dimensional, measuring range 0...360°; Size 52 mm; MEMS capacitive measuring principle; ISO 13849 compliant firmware; E1 compliant design; Interface CANopen®, SAE J1939, Analog; Connection M12 and cable; Protection up to IP 69K