Baumer

Solid shaft with clamping or synchro flange; Encoder with solid shaft ø10 mm or ø6 mm; Optical sensing method; Max. 5000 pulses per revolution; Clamping or synchro flange; Industrial standard; Small profile depth

Bellows coupling with aluminium/stainless steel

Solid shaft with clamping or synchro flange; High resolution programmable encoder; Solid shaft ø10 mm or ø6 mm; Optical sensing method; Max. 320000 pulses per revolution; Clamping or synchro flange; Industrial standard; Small profile depth

Electronic digital pressure gauge ideal for field measurements; Pressure display; Stores MIN and MAX pressures from the start of operation; Measurement of the pressure deviation in a given time interval (leak test); Allows Calibration and verification of correct operation of the installed devices; Suitable for verification of the pressostat adjustments, transmitters...

Micro series - shaft ø5 mm; Mini encoder with solid shaft ø5 mm; Optical sensing method; Max. 2048 pulses per revolution; Housing ø30 mm; Operation speed max. 12000 rpm; Synchro flange

Hour counters with DIN dimensions; Time and hour counter; DC voltage; 7-digit number wheel counter; Counting capacity: 999999.9 h; Without reset

Adaptation of different connections; Stainless steel; „Version with swiveling nut for easy positioning of the measuring instrument and installation of differential pressure gauges on manifolds

Analyzer for encoders; Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.); Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding); Individual error messages; Windows applications software for the PC, for graphical display and statistical...

Analyzer for encoders; Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.); Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding); Individual error messages; Windows applications software for the PC, for graphical display and statistical...

Solid shaft with clamping or synchro flange; Encoder with solid shaft ø10 mm or ø6 mm; Optical sensing method; Max. 5000 pulses per revolution; Clamping or synchro flange; Industrial standard; Small profile depth

Through hollow shaft ø10 to ø14 mm; Encoder multiturn / analog output; Voltage output or current output; Control inputs reset and rotating direction; Optical sensing singleturn, magnetical sensing multiturn; Self-diagnostic; Total resolution: 16 bit; Factory-set adjustable angle (0°-360° resp. up to 1024 x 360°); Flange connector radial

Solid shaft ø10 mm with clamping flange; Encoder single- or multiturn / SSI; Optical sensing singleturn, magnetical sensing multiturn; Resolution: max. singleturn 14 bit, multiturn 24 bit; Centering alignment ø36 mm, mounting screw hole circle ø48 mm; Self-diagnostic; Electronic zero point adjustment; Flange connector radial