VEX-ELIMECS company logo
Catalog>ABB>Installation Materials>Flush Mounted Boxes
[siemens_summary]
[catalog_children]
[catalog_search_products]
Flush Mounted Boxes

Flush Mounted Boxes

Items 25 - 36 of 100 from ABB ⍾ Last modified Aug 29, 2025
▲ Accessories for Plastic Flush Mounted Boxes Fire Resistant Boxes Lamp Outlets Plastic Installation Boxes (for WA Inserts) Plastic Junction Boxes

Flush Mounted Boxes ⍾ Page 3

12345…9
Abb – 2TKA130044G1
Product detailsAdd to RFQ
2TKA130044G1 - Abb
Low mounting boxes may be joined side by side by using a PMR474 interconnector, which must be cut to the height of the bottom of the box. Made of halogen free material (IEC/61249-2-21).
Abb – 2TKA130030G1
Product detailsAdd to RFQ
2TKA130030G1 - Abb
The device offers the AU3.2 mounting box modified with a 28 mm deep extension ring for use in walls built of bricks that have pipe ducts. No branch inlets are required at the bottom of the box - straight access makes wire laying easier. There is no need to bend the conduits. Made of halogen free material (IEC/61249-2-21) and fulfills...
Abb – 2TKA130042G1
Product detailsAdd to RFQ
2TKA130042G1 - Abb
The PMR399 is 60 mm deep and is often used in renovating old houses, when adding 50 mm thermal insulation to inside walls while leaving existing conduit installations in place. The extension ring is attached to the old mounting box so as to extend it to the level of the new boarding.
Abb – 2TKA130032G1
Product detailsAdd to RFQ
2TKA130032G1 - Abb
The box has 2 branch inlets with locking devices for D20 conduits. A separate inlet can be attached to the side opposite the fixed inlets. The bottom of the box has two inlets. Inlets cannot be attached to the sides of the box, but the sides can be used to connect boxes with each other using a PMR474 interconnector cut...
Abb – 2TKA130031G1
Product detailsAdd to RFQ
2TKA130031G1 - Abb
The characteristics of this box are the same as the AU3.2; the difference is in the inlets. The box has 2 branch inlets for D20 conduits. There are also 3 knock-out on the side, and 2 on the bottom. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670
Abb – 2TKA130040G1
Product detailsAdd to RFQ
2TKA130040G1 - Abb
If necessary, the box AU17.2 may be divided in two by using partition plate PMR345.
Abb – 2TKA130038G1
Product detailsAdd to RFQ
2TKA130038G1 - Abb
A box is attached to its base from the inside with a PMR135 installation adaptor through the opened center blank. The screw-head is covered with the plug in the adaptor. The installation adaptor is used to eliminate any measurement errors made during panelling.
Abb – 2TKA130033G1
Product detailsAdd to RFQ
2TKA130033G1 - Abb
The AU8 junction box is 53 mm high and has eight inlets for Ø 20 conduits. The box also has knock-outs for 4 side inlets and 4 bottom inlets. In wall installation the box can be attached with a AS13 support. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard...
Abb – 2TKA130008G1
Product detailsAdd to RFQ
2TKA130008G1 - Abb
The AS15 is designed to be used as a connector between AUS15.2 mounting boxes. Open needed knock-out holes on mounting boxes for the interconnector and install the boxes on the wall (board). Mount the interconnector in place from the inside of a box, to create a route for wires between boxes. Note
Abb – 2TKA130004G1
Product detailsAdd to RFQ
2TKA130004G1 - Abb
The junction box height can be increased by 13 mm by means of the AK7 extension ring. Screw distance c/c 78 mm.
Abb – 2TKA130003G1
Product detailsAdd to RFQ
2TKA130003G1 - Abb
The AK17 extension ring is 13 mm deep, and is used to modify the AU17.2 mounting.
Abb – 2TKA130002G1
Product detailsAdd to RFQ
2TKA130002G1 - Abb
The AK14 extension ring is used to change the depth of the AU8 and AU19 junction boxes, so that conduiting can take place above the concrete reinforcement. It gives a 75 mm space between the top level of the cast and the conduits; the AU19 gives a space of 67 mm.