Industrial communication technology

Antenna cable - RAD-CAB-EF142-5M - 2884525; Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: stranded, attenuation: 2.8 / 4.9 / 7.8 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2 x SMA (male), cable length: 5 m (16 ft.)

Antenna cable - RAD-CAB-PFP600-150 - 2885184; Antenna cable, outside diameter: 15 mm (0.6 in.), inner conductor: solid, attenuation: 3.9 / 6.8 / 10.4 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2x N (male), cable length: 45 m (150 ft.)

Antenna cable - RAD-CON-MCX90-N-SS - 2885207; Antenna cable, outside diameter: 2.5 mm (0.1 in.), inner conductor: stranded, attenuation: 0.9 dB at 900 MHz, connection: 90° MCX (male) -> N (male), cable length: 1.2 m (4 ft.)

Antenna cable - RAD-CAB-PFP600-125 - 2885171; Antenna cable, outside diameter: 15 mm (0.6 in.), inner conductor: solid, attenuation: 3.3 / 5.7 / 8.7 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2x N (male), cable length: 38 m (125 ft.)

Antenna - RAD-ISM-2400-ANT-OMNI-5-0 - 2884923; Omnidirectional antenna, 2.4 GHz, gain: 5 dBi, polarization: linear, opening angle: h/v 360°/45°, degree of protection: IP55, connection: SMA (male)

Adapter - RAD-ADP-SMA/F-SMA/F - 2884541; Antenna adapter for control cabinet feed-through, frequency range: 0.3 GHz ... 6 GHz, connection: 2 x SMA (female)

Termination resistor - FL LCX 50-OHM - 2884978; A termination resistor must be screwed on at the end of the leaky wave conductor which does not contain any wireless part. It guarantees an antenna cable termination with the correct impedance and is important for every wireless installation.

Wireless set - ILB BT ADIO MUX-OMNI - 2884208; Wireless-MUX set, two modules with 16 digital inputs and outputs and 2 analog inputs and outputs (0 ... 20 mA, 0 ... 10 V) each, incl. omnidirectional antennas with 1.5 m  cable

Media module - FL IF 2FX ST-D - 2884033; Fiber optic interface module for connecting 100 Base-FX multi-mode glass fibers (1300 nm), ST, connection direction downward

Cable - CM-KBL-RS232/USB - 2881078; Connecting cable D-9-SUB to USB, with adapter D-9-SUB to D-25-SUB.

Fiber optic adapter - IBS OPTOSUB-F/R-LK-OPC-2MBD - 2878010; INTERBUS fiber optic adapter, for converting the remote IN interface to fiber optics, FO output right, correction of the optical transmission power, 2 MBD

Fiber optic adapter - IBS OPTOSUB-F/L-LK-OPC-2MBD - 2878023; INTERBUS fiber optic adapter, for converting the remote IN interface to fiber optics, FO output left, correction of the optical transmission power, 2 MBD