Measurement and control technology

Timer relay - ETD-BL-1T-ON-CC- 30MIN - 2917434; Timer relay with switch-on delay (with control contact) and an adjustable time range (0.3 min - 30 min), with screw connection

Timer relay - ETD-BL-1T-OFF-CC-300MIN - 2917489; Timer relay with off delay (with control contact) and an adjustable time range (3 min - 300 min), with screw connection

Timer relay - ETD-BL-1T-F- 10S - 2917492; Timer relay with flasher function (beginning with pulse) and an adjustable time range (0.1 s - 10 s), with screw connection

Timer relay - ETD-BL-1T-ON-CC-300MIN - 2917447; Timer relay with switch-on delay (with control contact) and an adjustable time range (3 min - 300 min), with screw connection

Timer relay - ETD-BL-1T-ON-300S - 2917382; Timer relay with switch-on delay (voltage-controlled) and an adjustable time range (3 s - 300 s), with screw connection

Timer relay - ETD-BL-1T-ON- 30MIN - 2917395; Timer relay with switch-on delay (voltage-controlled) and an adjustable time range (0.3 min - 30 min), with screw connection

Timer relay - ETD-BL-1T-OFF-CC- 30MIN - 2917467; Timer relay with off delay (with control contact) and an adjustable time range (0.3 min - 30 min), with screw connection

Timer relay - ETD-BL-1T-OFF-CC-300S - 2917463; Timer relay with off delay (with control contact) and an adjustable time range (3 s - 300 s), with screw connection

Timer relay - ETD-BL-1T-ON- 10S - 2917379; Timer relay with switch-on delay (voltage-controlled) and an adjustable time range (0.1 s - 10 s), with screw connection

Cable set - TC-C-PTB3-SC-SET2 - 2908917; Cable set for TC-MACX-MCR-PTB power and fault signaling module (Order No. 2904673), designed for reverse supply through the controller (redundancy not possible), for use on the Termination Carrier for modules from the MACX Analog Ex series.

Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-1S-SP - 2908856; Ex i measuring transducer supply conditioner and input signal conditioner, only output 1 is HART-transparent. Transmits supplied or active signals from the Ex area with electrical isolation to two loads. SIL 2 in accordance with IEC 61508, Push-in connection.

Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-1S - 2908855; Ex i measuring transducer supply conditioner and input signal conditioner, only output 1 is HART-transparent. Transmits supplied or active signals from the Ex area with electrical isolation to two loads. SIL 2 in accordance with IEC 61508, screw connection.