Motor Controllers

The HF-DOL-range is used for the direct-on-line start of motors and the switching of non-resistive loads. With contactor and overload relay functionalities integrated into one device, the results are faster wiring times and fewer faults. The range covers 0.6 A, 2.4 A and up to 9 A - for motors up to 3 kW – 500 V AC. The integrated...

SMK3-X1.10 Terminal blocks communication of SMK3.0 Package with 10 pieces Price per terminal block

SMK3-X2.10 Terminal blocks for supply of SMK3.0

External current transformer for currents up to 850 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary current.

SMK3.0 Single Mounting Kit

CDP23.300 cable from Ethernetinterface like MTQ22 or PNQ22 to UMC100.3

CDP23.150 cable from Ethernetinterface like MTQ22 or PNQ22 to UMC100.3

External current transformer for currents up to 310 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary current.

External current transformer for currents up to 185 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary current.

CDP24.150 Cable SMK3.0 - Drawer unshielded, length 1.5 m. Used as connection from the drawer terminal in the back to the SMK3.0single mounting kit.

External current transformer for currents up to 500 A primary side. The secondary side is feed to the UMC100.3 motor controller. This enables the UMC100.3 to see up to the primary current.

The UTP22-FBP allows to configure and monitor FBP devices connected to a PROFIBUS network from a service laptop.