PMCprotego D - servo drives

Technical data at 3 x 400 V AC: Continuous output current: 1.5 A; Imax; (2 s) = 4.5 A; Imax (5 s) = 3.0 A; Power consumption in S1 mode: 1.1; kVA Integral brake resistor Further hardware options: Expansion card; I/O.

Technical Details; at 3 x 230 V AC supply voltage: Permanent output current: 2,5 A;; Imax (2 sec.) = 4,5 A; Imax (5 sec.) = 3,0 A;; Power consumption in S1 operation: 1,0 kVA; Internal brake resistor and mains filter

Technical data at 3 x 400 V AC: Continuous output current: 1.5 A; Imax; (2 s) = 4.5 A; Imax (5 s) = 3.0 A; Power consumption in S1 mode: 1.1; kVA Integral brake resistor Further hardware options: Expansion card; PROFIBUS-DP slave.

Expansion module for the energy storage to the Storage of the braking; energy from the Servo amplifiers.; Storage volume up to 1600 Ws

Card can be used in PMCprotego Connector X5 (e.g. for Encoder; emulation) Connector X3C (2 analogue inputs and 2 analogue outputs).

Card can be used in PMCprotego Connector X5 (e.g. for Encoder; emulation).

Energy storage for the storage of the brake energy from the Servo; amplifiers.; expands the storage volume up to 1600 Ws; PTC resistor 35W / 1750Ohm; Current peak 40 A

Hybrid cable assembled on both sides: connectors con.23; round connector 9-pin speedtec; No. of wires and cross section (4x4,0+; (2x1,0)+(2xAWG22)); suitable for PMCprotego D.01-24 and the motors; PMCtendo SZ.4x...K bis SZ.73...K with HDSL encoder; Length in accordance; with customer specifications;

Hybrid cable assembled on both sides: connectors con.23; round connector 9-pin speedtec; No. of wires and cross section (4x2,5+; (2x1,0)+(2xAWG22)); suitable for PMCprotego D.01-24 and the motors; PMCtendo SZ.4x...K bis SZ.73...K with HDSL encoder; Length in accordance; with customer specifications;

Hybrid cable assembled on both sides: connectors con.40; round connector 11-pin speedtec; No. of wires and cross section (4x4,0+; (2x1,0)+(2xAWG22)); suitable for PMCprotego D.01-24 and the motors; PMCtendo SZ.75...K with HDSL encoder; Length in accordance; with customer specifications;

Hybrid cable assembled on both sides: connectors con.40; round connector 11-pin speedtec; No. of wires and cross section (4x2,5+; (2x1,0)+(2xAWG22)); suitable for PMCprotego D.01-24 and the motors; PMCtendo SZ.75...K with HDSL encoder; Length 20m;

Hybrid cable assembled on both sides: connectors con.40; round connector 11-pin speedtec; No. of wires and cross section (4x2,5+; (2x1,0)+(2xAWG22)); suitable for PMCprotego D.01-24 and the motors; PMCtendo SZ.75...K with HDSL encoder; Length 15m;