VEX-ELIMECS company logo
Catalog>ABB>Control products>Safety Products
[siemens_summary]
[catalog_children]
[catalog_search_products]
Safety Products

Safety Products

Items 625 - 636 of 795 from ABB ⍾ Last modified Aug 29, 2025
▲ Cables and Connectors Contact Strips and Bumpers Emergency Stops and Pilot Devices Fencing Systems Optical Safety Devices Programmable Safety Controllers Safety Control Devices Safety Controllers Safety Mats Safety Relays Safety Sensors, Switches and Locks

Safety Products ⍾ Page 53

1…5152535455…67
Abb – 2TLA020054R1210
Product detailsAdd to RFQ
2TLA020054R1210 - Abb
Adaptation of ABB optical safety devices with OSSD outputs to the DYNlink solution. Tina 10A has one M12-5 male connector towards the DYNlink loop and one M12-8 female connector towards the OSSD device.
Abb – 2TLA020054R0500
Product detailsAdd to RFQ
2TLA020054R0500 - Abb
Connection block for series connection of up to 8 DYNlink devices. Eight M12-5 female connectors for the devices. The information signal of each device can be wired separately. The cable used for the connection to the Tina 8A should have a diameter 7 - 12 mm. If less than 8 devices are connected, complete with Tina 1A blind plugs.
Abb – 2TLA020053R7000
Product detailsAdd to RFQ
2TLA020053R7000 - Abb
Termination plug M12-5. For Adam OSSD with M12-3H. Connects pin 1 with pin 2 and 4.
Abb – 2TLA020054R0200
Product detailsAdd to RFQ
2TLA020054R0200 - Abb
Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop.
Abb – 2TLA020053R7100
Product detailsAdd to RFQ
2TLA020053R7100 - Abb
Termination plug M12-8. For Adam OSSD with M12-3G. Connects pin 2 with pin 3 and 4.
Abb – 2TLA020054R0000
Product detailsAdd to RFQ
2TLA020054R0000 - Abb
Tina 1A blind plug is connected to the unused M12 connectors of the connection blocks Tina 4A or Tina 8A. M12-5 male connector.
Abb – 2TLA020054R0300
Product detailsAdd to RFQ
2TLA020054R0300 - Abb
Connection block for series connection of up to 4 DYNlink devices. Four M12-5 female connectors for the devices. The information signal of each device can be wired separately. The cable used for the connection to the Tina 4A should have a diameter 7 - 12 mm. If less than a devices are connected, complete with Tina 1A blind plugs.
Abb – 2TLA020054R0100
Product detailsAdd to RFQ
2TLA020054R0100 - Abb
Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the device enclosure to a M20 cable entry.
Abb – 2TLA020054R0600
Product detailsAdd to RFQ
2TLA020054R0600 - Abb
Adaptation of pressure sensitive devices with short-circuit detection, like safety mats, safety edges and bumpers, to the DYNlink solution. Tina 6A has one M12-5 male connector towards the DYNlink loop and one M12-5 female connector towards the safety device.
Abb – 2TLA020051R5900
Product detailsAdd to RFQ
2TLA020051R5900 - Abb
Adam safety sensor unit with OSSD signals and reset with indication. M12-8 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included.
Abb – 2TLA020053R0300
Product detailsAdd to RFQ
2TLA020053R0300 - Abb
Spare part. 4 distance rings 4.5 x 8 x 4 mm in black polyamide. To be mounted in Adam/Eva mounting holes.
Abb – 2TLA020051R8000
Product detailsAdd to RFQ
2TLA020051R8000 - Abb
Eva actuator for use with Adam AS-i sensors in the Eden sensor system, IP69K, yellow, 4pcs of DA2 spacer rings are included.