Safety Sensors, Switches and Locks

Spring for Emergency Pull Wire Switch systems, 220mm, Stainless Steel. When using one Emergency pull wire switch the wire should be anchored at the other end using this Spring.

Spare part LED for LineStrong and EStrong. Steady Green/Steady Red 24VDC

Eyebolt M8x1.25 for Emergency Pull Wire Switch systems, 8 pcs, Stainless Steel.

Eyebolt M8x1.25 for Emergency Pull Wire Switch systems, 8pcs, Galvanized.

Front slide handle for GKey4. Can be mounted on hinged doors and on sliding doors, both on the left and on the right. Includes a mounting plate for GKey4.

Spare part Emergency stop button for LineStrong.

Spare part LED for LineStrong and EStrong. Steady Green/Steady Red 230VAC

Safety lock GKey with 4 positions for pilot devices, die-cast housing, escape release and manual unlock function. Can be mounted on hinged doors and on sliding doors, both on the left and on the right. Delivered with mechanical tongue actuator, RFID actuator, entry cover and screw bit.

Screwdriver, Anti-Tamper, Torx T20

10m Galvanized wire pull kit. Includes 10m Wire (One end is terminated with thimble and permanent clamp), 5 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key, 1 pcs QuickLink.

20m Galvanized wire pull kit. Includes 20m Wire (One end is terminated with thimble and permanent clamp), 9 pcs Eyebolts, 1 pcs Tensioner, 1 pcs Allen Key, 1 pcs QuickLink.

Corner pulley for Emergency Pull Wire Switch systems, Stainless Steel. For navigating corners, both inside and outside.