Sensors systems

7ML5431XAD200DG0,X=304L SS,FKM PROCESS CONNECTION AND ANTENNA MATERIAL 304L STAINLESS STEEL, PTFE EMITTER, FKM SEAL THREADED CONNECTIONS 316L 2" NPT (ASME B1.20.1) (TAPERED THREAD) COMMUNICATION: 4-20MA HART, START-UP AT

KIT,2" HORN,TANTALINE,LR250 2" HORN (FITS 2" ASME OR DN 50 NOZZLES) ALL SURFACES OF HORN ANTENNA TREATED WITH TANTALINE SURFACE ALLOY 50 MICRONS TANTALINE 3 MTH MFG GUARANTEE PART IS TESTED FOR INTEGRITY OF THE TANTALUM LAYER BY FULL IMMERSION IN HOT HYDROCHLORIC ACID FOR AT LEAST 48 H HTTP://WWW.TANTALINE.COM/

LOAD CELL,CLINKER SCALE, 500LBS

7ML5517-2CXX1-2AA1; XX=DN50 TRI CLAMP INVERSE FREQUENCY SHIFT CAPACITANCE LEVEL AND INTERFACE TRANSMITTER FOR EXTREME AND CRITICAL PROC 2001 TO 3000 MM (78.78 TO 118.11") 2) AND 4) DN50 SANNITARY FITTING CLAMP GENERAL PURPOSE 2 X M20 X 1.5 (IP68, ADAPTER) WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF) Y01 = 2400MM Y02...

7ML56523DG000DB2-Z,Y01=1180MM PROCESS CONNECTION G 1 1/2" ((BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202) LENGTH: EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3") WETTED SEALS: GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD...

7ML56523DG000DB2-Z,Y01=1380MM PROCESS CONNECTION G 1 1/2" ((BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202) LENGTH: EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3") WETTED SEALS: GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS: FLAMEPROOF ENCLOSURE WITH IS PROBE, ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD...

7ML56606JD110HBY-Z,X=Y02= 500MM ACTIVE SHIELD PROCESS CONN: DN 100,PN 16 EXTENDED ROD, LENGTH 1000 MM (39.37")WITH THERMAL ISOLATOR (FOR PROCESS CONN.TEMPERATURES OVER +85 C (+185 F) FFKM (FOR PROCESS TEMPERATURES ABOVE -20 C (-4 F)) 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS GENERAL PURPOSE (CSA, FM) ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 Y02=500MM, ADD...

7ML57312AX161CA0-Z, X=G 1 1/2" CLASS A,Y01=1500 MM: POWER SUPPLY: 19 TO 230 V AC, 19 TO 55 V DC, TWO RELAY OUTPUTS (DPDT).PROCESS TEMPERATURE: WITHOUT TEMPERATURE ISOLATOR PROCESS CONNECTION:1-1/2"G CLASS A (EN ISO 228-1) EXTENSION LENGTH Y01=1500MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS STEEL 304 (1.4301).APPROVALS:CSA/FM GENERAL PURPOSE, C-TICK FURTHER DESIGNS: PLEASE ADD "-Z" TO ORDER NO. AND SPECIFY ORDER CODE(S)....

7ML13011AA112AA0-Z,Y01=55CM MODEL COAXIAL MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH Y01=55CM O-RINGS EPDM (ETHYLENE PROPYLENE RUBBER) PROCESS CONNECTION (SIZE/TYPE) 3/4" NPT ((TAPER), ANSI/ASME B1.20.1) FURTHER DESIGNS PLEASE ADD "-Z" TO ORDER NO. AND SPECIFY ORDER CODE(S). Y01=55CM

LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, M20 CABLE INLET, APPROVAL OPTION F, NO PROCESS CONNECTION

LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, NPT CABLE INLET, APPROVAL OPTION D, NO PROCESS CONNECTION

MILLTRONICS MLC BELT SCALE: MLFB: 7MH71262XB1, WHERE X=60" SS ROLLER BELT WIDTH ('A' DIMENSION) 60" (1524 MM) LOAD CELL CAPACITY 20 LB (9.09 KG) WEIGHING IDLER DIMENSIONS 1.96" (50 MM) CALIBRATION WEIGHT 10.4LB (4.7KG) B' DIMENSION: 62" (1574 MM) PER DRAWING SUPPLIED